 发表于: 周日 6月 26, 2011 9:31 pm 文章标题: |
|
 发表于: 周日 6月 26, 2011 9:31 pm 文章标题: |
|
|
iangreenhalgh1 wrote:
I'm not going to project them, I'm going to scan them, I just want the saturated colours of slide film and I bought a 5-roll box of Provia cheap a while back.
I would hope that a 6x12 slide would make for a very nice large print if scanned well at 2400ppi, by large I mean 60cm x 120cm. That's only a 10x enlargement ratio with such a large negative. I have a friend who does even larger prints (he gets them printed by a company) using digital equipment, he stitches images together to form panoramas and uses hdr techniques.
I figured I'd try the same thing but lo-fi, the camera is a work in progress, I fitted a mask to a 7x12cm 116 film Ensign box camera, going to shoot a roll of 120 film through it using the ancient meniscus lens before I remove it and replace it with a very nice Ross WA Xpress f4 5-inch that will cover a 12cm side frame, the holdup is in finding a large enough shutter to fit the 2-inch barrel on the Ross lens. The Ross lens is closer to f3 wide open and is said to be sharp edge to edge even wide open as it was designed for aerial photography and was often used wide open. I doubt I'll be using it wide open though but it will be interesting to see if it really is sharp in the corners on a 6x12 frame, it was originally used in the Williamson aerial cameras that used rollfilm at high speed.
Sorry Attila, won't hijack your thread further, I need to start my own on this project. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |