MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

New text on lens fungus... (by Zeiss)
查看上一个主题 :: 查看下一个主题  


Reply

This text is new to me, maybe it had already been posted:

Service Info: Fungus On Lenses


Reply

They said if humidity above 70% for three days. In my experience fungus start to growing around 60% and don't need to wait 3 days.


Reply

Well, Attila, as I have written in the other thread, I had some old lenses stored in a room with a little over 60% r.h. for quite a while and nothing happened.

I guess 70% is a scientific result, otherwise they would not write that, but 60% is the limit to be on the safe side. They also write that is kind of safe below 60% (there they do not say 70%).

I've read somewhere else that fungus does not need just one of this preconditions (humidity, darkness, nutrition, no airflow and right temperature) but all of them. That would mean that even if the air is between 10 and 35° C, it is dark, there is some dust and no airflow, fungus will not grow when it is dry enough - if humidity is high, you can stop fungus when you put lenses in a well-lit area (which is difficult to achieve for 24hrs/7days).

The reason why I checked on fungus in the Internet again is that we have had "fungus weather" during the last days: 80-95% rel. hum. outside, rain and thunderstorms (so no sun) and almost 30°C here in Hessen. Crying or Very sad

But it starts to change...

I guess, summer is fungus season, hot and humid (and of course no sun inside). In winter we have about 40% r.h. inside due to heating, so no fungus problems here.


Reply

You have right depend from the environment, not only from humidity, another fact a few people able to recognize in early stage. Early stage like oily spots not like fungus. When most of the people able to recognize fungus that is too late generally. I had always good experience to clean lenses, but in last time I got two lenses. I couldn't clean them I suppose fungus eat glasses too not only the coating. I worry about this fact pretty much.