 发表于: 周二 11月 25, 2008 5:57 pm 文章标题: I went for it |
|
 发表于: 周二 11月 25, 2008 5:57 pm 文章标题: I went for it |
|
|
n6mod wrote:
So I went for it, converting a cheap eBay 20D.
I did the "type 2" version, which requires hacking up the body a little more than just replacing the mount, but allows unmodified Rokkors to attach.
The scale can be at the top when the lens is mounted, though you can turn the lens past that point about another 30deg. There is no lock for the lens, but the mount is quite snug, so I'm not too worried.
One *major* caution: His instructions for the type 2 installation have you removing the electrical contact support through the mount opening. This is destructive, you'll tear at least the flex circuit before you get the support out. Not a big deal if you don't plan on reversing the conversion, but if you do, this is bad. It's also bad if you're planning on tucking an AF-confirm chip in there, which I was. Now I need to open the camera up much further to find the other end of that flex circuit.
I found a 20D parts manual on the web, so I can at least see how the bits go together. I'll take pictures of the process for posterity.
-Zandr
PS: It didn't occur to me at the beginning of this process that now I need a Minolta body cap.  |