| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
lahnet
 注册时间: 2007年4月10日 文章: 1167 来自: Denmark
|
 发表于: 周二 12月 09, 2008 6:51 pm 文章标题: Soligor Cds light meter |
|
 发表于: 周二 12月 09, 2008 6:51 pm 文章标题: Soligor Cds light meter |
|
|
lahnet wrote:
I have this light meter from Soligor, and it seems to be in working order.
If anyone have a manual or a link to one, I will be more that happy.
I am a little confused using it, and what about the screw on the back +0-
 _________________ Henrik
Lahnet-Foto
My FLICKR
Gear list |
|
| 返回顶部 |
|
 |
LucisPictor
 注册时间: 2007年2月26日 文章: 17633 来自: Oberhessen, Germany / Maidstone ('95-'96)
Expire: 2013-12-03
|
 发表于: 周二 12月 09, 2008 7:30 pm 文章标题: |
|
 发表于: 周二 12月 09, 2008 7:30 pm 文章标题: |
|
|
LucisPictor wrote:
These little screws were used to adjust the lightmeter.
What you normally do is to set the ISO, point at the subject and press the activator button. The needle shows you the right parameters. _________________ Personal forum activity on pause every now and again (due to job obligations)!
Carsten, former Moderator
Things ON SALE
Carsten = "KAPCTEH" = "Karusutenu" | T-shirt?.........................My photos from Emilia: http://www.schouler.net/emilia/emilia2011.html
My gear: http://retrocameracs.wordpress.com/ausrustung/
Old list: http://forum.mflenses.com/viewtopic.php?t=65 (Not up-to-date, sorry!) | http://www.lucispictor.de | http://www.alensaweek.wordpress.com |
http://www.retrocamera.de |
|
| 返回顶部 |
|
 |
lahnet
 注册时间: 2007年4月10日 文章: 1167 来自: Denmark
|
 发表于: 周二 12月 09, 2008 7:37 pm 文章标题: |
|
 发表于: 周二 12月 09, 2008 7:37 pm 文章标题: |
|
|
lahnet wrote:
| LucisPictor 写道: |
These little screws were used to adjust the lightmeter.
What you normally do is to set the ISO, point at the subject and press the activator button. The needle shows you the right parameters. |
Thanks.
1/ Do you know if is a "spot meter" or a xxx (don´t know the word, sorry)?
2/ Do I need to go to the main subject, or can I just point it?
3/ I think I need to adjust it, would it be a good idea to use my Sony A700, the light meter on that is excellent? _________________ Henrik
Lahnet-Foto
My FLICKR
Gear list |
|
| 返回顶部 |
|
 |
bob955i
 注册时间: 2007年4月15日 文章: 2495
|
 发表于: 周二 12月 09, 2008 7:41 pm 文章标题: |
|
 发表于: 周二 12月 09, 2008 7:41 pm 文章标题: |
|
|
bob955i wrote:
The +/- screw is most likely for adjusting the "zero" position of the meter pointer.
The red and green buttons are what you press to turn the meter on to measure light - one will be for a low light range and the other, bright light.
In the absence of instructions you can tell which is which by pointing the meter at a bright light source and pressing the red and green buttons in turn - if the meter is working correctly, one of them will cause the pointer to go full scale on the meter dial.
Whichever button that does this is the low light range button.
Your meter is most likely an "averaging" meter in that it reads from a fairly large central area and you can point it from where you stand to take the photo - point it slightly down so you read more of the subject than the sky for a more accurate exposure. Be sure to set the ISO correctly first though as Carsten says.
HTH. 
最后由 bob955i 于 周二 12月 09, 2008 7:46 pm 编辑;共编辑 1 次 |
|
| 返回顶部 |
|
 |
lahnet
 注册时间: 2007年4月10日 文章: 1167 来自: Denmark
|
 发表于: 周二 12月 09, 2008 7:45 pm 文章标题: |
|
 发表于: 周二 12月 09, 2008 7:45 pm 文章标题: |
|
|
lahnet wrote:
Yes, I see know the red is for low light, slower than 1/2 sek. _________________ Henrik
Lahnet-Foto
My FLICKR
Gear list |
|
| 返回顶部 |
|
 |
bob955i
 注册时间: 2007年4月15日 文章: 2495
|
 发表于: 周二 12月 09, 2008 7:50 pm 文章标题: |
|
 发表于: 周二 12月 09, 2008 7:50 pm 文章标题: |
|
|
bob955i wrote:
Good.
To use the meter:
1. Set the ISO.
2. Push whichever button best suits the available light.
3. Read off the exposure value on the meter.
4. Transfer it to the dial.
5. Read off all the available f stop/shutter speed combinations for the particular ISO you're using. |
|
| 返回顶部 |
|
 |
lahnet
 注册时间: 2007年4月10日 文章: 1167 来自: Denmark
|
 发表于: 周二 12月 09, 2008 8:06 pm 文章标题: |
|
 发表于: 周二 12月 09, 2008 8:06 pm 文章标题: |
|
|
lahnet wrote:
Thanks
I have just tried that in low light conditions (indoor) and it seems to work fine
I tried to take some pictures using A700 and they was ok.
But lets say I am 10 meters from my subject. Do I just point the meter in that direction, or do I need to move the 10 meters, read the light and move back.
I will of course try tomorrow, but it would be nice to know how it was intended to be used. _________________ Henrik
Lahnet-Foto
My FLICKR
Gear list |
|
| 返回顶部 |
|
 |
Screamin Scott
 注册时间: 2007年10月13日 文章: 1014 来自: Dallas, Georgia USA
|
 发表于: 周二 12月 09, 2008 8:15 pm 文章标题: |
|
 发表于: 周二 12月 09, 2008 8:15 pm 文章标题: |
|
|
Screamin Scott wrote:
lahnet,
Unless your meter has a white dome that can be slid in front of the cell that takes the reading, you take your reading by pointing it at your subject. This is reflective metering. If it has that dome, you would slide it over the cell & stand at your subject & point it at the light source. This is called incident metering. Looking at the photos you posted, it appears as though your meter is of the reflective type, but short of a frontal view, I can't be certain... _________________ Cameras-Nikon D300, D7100,D610,FE2,FTN ,FT2,N90s, Olympus Pen EP-3 & Olympus OM-D E-M10
Nikkor AF Zooms=28-105/3.5D,28-70/3.5D,35-135/3.5, et al
Nikkor AF //50/1.8,//Nikkor MF//50/2ai,50/1.8ais 50/1.4ai,24/2.8ais,28/2.8ai,28/3.5ai,55microAis/2.8,105/2.5ai,200/4ai,300/4.5ai35-135/3.5Ais,et al
Kiron /Kino made lenses//70-210/4ai,28-105/3.2ai,30-80/3.5ai,Viv 28/2ai,35-85/2.8aiVivS1,105/2.8Ais Dine,24-48/3.8ai VivS1,50-150/3.8aiViv,28-85/2.8aiViv,100/2.8Nai Viv,70-210/3.5Nai Viv,28/2.5ai Viv Komine made Viv//24/2Ais,135/2.8aiCF,28-50/3.5ai,28-90/2.8ai Viv S1,80-200/4.5aiCosina made Viv 19/3.8 Ais...Also Sigma 24/2.8 Ais Tokina made24/2.8ai VivAF Sigma 21-35/3.5,& other lenses... A link to some of my Flickr albums...
https://www.flickr.com/photos/screaminscott/albums |
|
| 返回顶部 |
|
 |
mo
 注册时间: 2009年8月27日 文章: 8979 来自: Australia
Expire: 2016-07-30
|
 发表于: 周日 1月 31, 2010 11:33 pm 文章标题: |
|
 发表于: 周日 1月 31, 2010 11:33 pm 文章标题: |
|
|
mo wrote:
I just picked up one of these the red is for low light and green for normal light.....my one was working when holding the red button in but no response from the green when held in? I just cleaned the terminal from the battery and now no response from either...any ideas?
http://www.flickr.com/photos/liamch/3678762914/
many thanks to the above person who wrote how to use it now just to get it working. _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
|
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|