MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

Zenit 3m top removal
查看上一个主题 :: 查看下一个主题  


Reply

I have a 3m that, inspired by others here, I intend to 'upgrade'. It needs a new mirror, focus screen and most likely a prism, all of which I have ready. the mirror was easy, but how do I get the top off? Is it the same as a Zenit E? If it is I'm making a meal of it as I can't budge the bit around the cable release/shutter. It goes around, moving the mirror up and down, but doesn't undo. I'm trying clockwise - is that right?

Any tips would be gratefully received.


Reply

hmmm, I'm not familiar with the 3m. You are probably aware of this site: http://tomtiger.com/ under zenit repair project. It might be a similar enough procedure to get a better idea of what your doing...Hope that helps some

~Marc


Reply

thanks Marc, yes I did see that one. I'm just not sure how similar the E and 3M are?


Reply

I know that Jon Goodman, the chap who sells the light seal kits, is an expert on repairing Zenits, including 3Ms. Maybe he could help if you don't get far here.

jon_goodman@yahoo.com


Reply

Thanks Peter. As it happens I took a chance and forced it a bit - and it worked! It does move clockwise. It seems all zenits are indeed equal under the skin.Smile
I'm putting in a screen and prism from 12xp which should brighten things up. And some fancy leather too. Will show when done. Thanks all.


Reply

For the benefit of anyone who comes across this thread in their search for info on opening up a 3M I will add a photo and a tip or two.
When you come to take off the wind on lever it's not quite the same as a Zenit 'E' type. Don't undo the three screws, just push the end of the spring so that it disappears and then lift off the remaining two parts of the lever together. You should also release the shutter before you put the lid back on or you may find everything stuck solid. And add a touch of grease to the brassed area you see in the photo.




I've now put the new mirror, prism and screen in and, wow, what a difference. Mind you it was very murky before. However infinity is now out so Ill need to remove a couple of shims. Another difference between this and later Zenits is that there is no mirror crate adjustment screw!




Reply

Beautiful piece! To bad about the lack of adjustment screw...its such an easy procedure for the E-series. Does the ground-glass have a split-screen or were they just the microprism?


Reply

Nice camera and nice pictures, congrats!.
Which lens did you use for them?.
It looks like you used flash with some kind of diffuser or reflector, didn't you?.

(Just asking to improve my own ones, I find yours much better...)

Jes.


Reply

Thanks guys.

the new screen from the 12xp is a micro prism and collar, no split which is how I prefer it. My OMs and contax have the same type so just habit really.
The old one in the 3m was more like a lens in itself. Like a condenser with one side ground.

The pictures are from my canon g3 with flash bounced off the ceiling. I only use it for ebay shots and this sort of thing now. But it's a very capable camera and very quick. Too much trouble to set up lights or reflectors and stuff when the ceiling does such a reasonable job.


Reply

Yeah I'm not a big split screener either. I have it with the zenit 122 and it seems to only be good for really bright situations.

I always thought that old ground glass was funny. It really is just a hunk of frosted glass.


Reply

Just an update.
I finally got around to processing a test roll from the 3m which had been sitting about since Christmas.
The camera worked very smoothly after it's refit with a good clear view from the new prism and screen and a much quieter mirror after new dampers. However there were a few light leaks in the back which I need to attend to and... frustratingly... it front focuses a bit! I need to put a shim in but it'll be a tight fit. The clips that held the old screen in place leave no room for shims when the new screen is in place, as it's thicker in the corners than the old 'lens'. I'll have to figure out an alternative I think. Confused
Apart from that crucial issue it's great!

A couple of shots - played with a bit as they're all OOF... I shot all wide open with the Helios 44.







Reply

Great shots!, congrats.
You did a good job with the camera!

Regards,

Jes.


Reply

Thanks Jes Cool


Reply

Love the last two! That horse shot is superb Cool