MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

C/Y adapters, important difference
查看上一个主题 :: 查看下一个主题  


Reply

Not only there are some adapters that allow lenses like Planar 1.4/50 to stop down while other adapters don't;

Now I have also found, that there are some Contax lenses - and I can give two examples: the Mutar I teleconverter and the S-Planar 60mm f/2.8 - that don't lock at all on the newer type of adapter, rotating freely, while they do lock well on older adapters.

I'd like to know if any of you has had the same issue with any Contax or Yashica lens.


Reply

please post pics of your adapters.


Reply

ok, I will


Reply

Orio 写道:
Now I have also found, that there are some Contax lenses - and I can give two examples: the Mutar I teleconverter and the S-Planar 60mm f/2.8 - that don't lock at all on the newer type of adapter, rotating freely, while they do lock well on older adapters.


I had a similar issue with one of the adapters. The problem was solved by loosening the two screws that hold the lock spring on the adapter, and moving the spring itself a bit lower. It's really easier to do than to explain; the problem was that the spring that's supposed to lock the lens was positioned slightly too high due to bad assembly tolerances, so it just went above the flanges of the lens.