MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

aperture problem w pancolar
查看上一个主题 :: 查看下一个主题  


Reply

hi guys

i have been shooting a lot lately w my 50mm 1.8 pancolar m 42 mount and i noticed that it stops down correctly to 5.6, but after that the aperture does not close further even though the dial continues to click at each fstop all the way to 16. the aperture pin on the lens mount appears to have been fully disabled, as it has no spring to it at all, which to me indicates the aperture should work fine regardless of adapter.

does anyone have any idea what might be wrong and/or what i can do about it?

update: did i post this topic in the wrong place, or has no one ever had this problem?
t

thanks!!!!
tony


Reply

Hello Tony,
sorry that you had no answer until now, but I think that the most of us are busy to prepare Christmas eve.
There might be three possible problems. 1. The lever under the pin (white) is blocked by something, so he can't get deep enough to pull the cable (green).
2nd. the hook (red) is blocked by something, so he cant push the aperture blades. 3rd. the cable is to long or went out of the guide. In my case it was 1st mixed with 3rd because I've done some infinity adjustments to use the lens on a Nikon. i solved it by putting the cable under the "aperture guide" (?? don't know the name for it)(yellow circle).

Hope this will help you
Andreas


Reply

andreas,thank you very much. i guess when things slow down after the holidays, i will have to open the lens up and see which of these problems i have! thanks again, and merry christmas!
tony