| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
xjjohnno
 注册时间: 2009年4月7日 文章: 1270 来自: Melbourne Australia
Expire: 2011-11-18
|
 发表于: 周三 12月 30, 2009 7:34 am 文章标题: Rim Dent removal tips? |
|
 发表于: 周三 12月 30, 2009 7:34 am 文章标题: Rim Dent removal tips? |
|
|
xjjohnno wrote:
I just recently acquired the tool for removing dents on lens rims and have yet to sort one minor problem which is not being able to screw off the name plate. I've managed to get the name plate to about 2 thread turns from being off but not quite good enough. If anyone's used these tools as fsold by a vendor in India and figured ow to sort that last bit of thread I'd appreciate any tips.
After getting the lens rim looking reasonably round I've tried using the tool a bit like a thread cutting die but to date the last bits aren't playing ball. |
|
| 返回顶部 |
|
 |
visualopsins
 注册时间: 2009年3月5日 文章: 11700 来自: California
Expire: 2027-07-11
|
 发表于: 周三 12月 30, 2009 4:11 pm 文章标题: |
|
 发表于: 周三 12月 30, 2009 4:11 pm 文章标题: |
|
|
visualopsins wrote:
try to chase those threads from the other direction: screw in a filter _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| 返回顶部 |
|
 |
ovim
 注册时间: 2008年9月27日 文章: 124 来自: Finland
Expire: 2015-01-28
|
 发表于: 周四 12月 31, 2009 7:14 am 文章标题: |
|
 发表于: 周四 12月 31, 2009 7:14 am 文章标题: |
|
|
ovim wrote:
Also a tiny drop of some lubricant into the threads might help. It must be very thin (like CRC 5-56) to seep into the thread also under the name ring.
Sometimes straigthening the rim can damage the thread surface, although they might look OK the surface might be rougher than on the other part of the threads This can cause just enough friction to stop the name ring from turning and a bit of lubrication might just do the trick. |
|
| 返回顶部 |
|
 |
xjjohnno
 注册时间: 2009年4月7日 文章: 1270 来自: Melbourne Australia
Expire: 2011-11-18
|
 发表于: 周四 12月 31, 2009 7:29 am 文章标题: |
|
 发表于: 周四 12月 31, 2009 7:29 am 文章标题: |
|
|
xjjohnno wrote:
I had one last go using the dent remover as a thread chaser but opened it up a tad on the tight spots which sorted the lens I was working on.
Now I have the fun of sorting a 58mm Biotar which is not just dented inwards but has metal pushed in towards the lens and compressing the existing thread. I suppose with enough practice, and me not being shy about buying dented lens that should come. |
|
| 返回顶部 |
|
 |
mo
 注册时间: 2009年8月27日 文章: 8979 来自: Australia
Expire: 2016-07-30
|
 发表于: 周四 12月 31, 2009 7:50 am 文章标题: |
|
 发表于: 周四 12月 31, 2009 7:50 am 文章标题: |
|
|
mo wrote:
Could you post a photo of what you are doing and the tool in question?Thanks _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
|
|
| 返回顶部 |
|
 |
xjjohnno
 注册时间: 2009年4月7日 文章: 1270 来自: Melbourne Australia
Expire: 2011-11-18
|
 发表于: 周四 12月 31, 2009 9:12 am 文章标题: |
|
 发表于: 周四 12月 31, 2009 9:12 am 文章标题: |
|
|
xjjohnno wrote:
Here's the tool, used for fixing bent filter rims on lenses. 点击此处在 eBay 上查看
Bugger the link doesn't want to play so pics along with the patients next day or 2. |
|
| 返回顶部 |
|
 |
mo
 注册时间: 2009年8月27日 文章: 8979 来自: Australia
Expire: 2016-07-30
|
 发表于: 周四 12月 31, 2009 9:44 am 文章标题: |
|
 发表于: 周四 12月 31, 2009 9:44 am 文章标题: |
|
|
mo wrote:
I appreciate the effort... I hate it when the ebay link does that  _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
|
|
| 返回顶部 |
|
 |
martinsmith99
 注册时间: 2008年8月31日 文章: 7029 来自: S Glos, UK
Expire: 2013-11-18
|
 发表于: 周四 12月 31, 2009 10:26 am 文章标题: |
|
 发表于: 周四 12月 31, 2009 10:26 am 文章标题: |
|
|
martinsmith99 wrote:
I fixed the link - it should work fine now.
I have one of those. It works ok but not for the faint hearted as it makes all sorts of crunching noises when straightening the rims. _________________ Casual attendance these days
最后由 martinsmith99 于 周四 12月 31, 2009 10:32 am 编辑;共编辑 1 次 |
|
| 返回顶部 |
|
 |
xjjohnno
 注册时间: 2009年4月7日 文章: 1270 来自: Melbourne Australia
Expire: 2011-11-18
|
 发表于: 周四 12月 31, 2009 10:30 am 文章标题: |
|
 发表于: 周四 12月 31, 2009 10:30 am 文章标题: |
|
|
xjjohnno wrote:
Thanks for that Martin. |
|
| 返回顶部 |
|
 |
Photomac
注册时间: 2008年1月11日 文章: 47 来自: Sutton Benger, UK
|
 发表于: 周四 12月 31, 2009 10:55 am 文章标题: |
|
 发表于: 周四 12月 31, 2009 10:55 am 文章标题: |
|
|
Photomac wrote:
Hello there,
I got my version of this tool from Micro-Tools, and it came with a helpful leaflet about how best to use it. The suggested method is to position the tool so that the screw handle is diametrically opposite the area that needs to have the dent removed, turn the screw handle to create a light expanding force, then lightly tap the end of the handle with a small hammer. This will reduce the compression in the screw (tension in the metal being straightened), so re-tighten lightly and repeat until the dent is cleared.
regards
Angus |
|
| 返回顶部 |
|
 |
Sevo
 注册时间: 2008年8月22日 文章: 1189 来自: Frankfurt, Germany
Expire: 2012-12-03
|
 发表于: 周四 12月 31, 2009 1:55 pm 文章标题: |
|
 发表于: 周四 12月 31, 2009 1:55 pm 文章标题: |
|
|
Sevo wrote:
Yep, these need a stretch-and-tap action. In any case, I rarely use mine on filter rings, as the overstretching involved poses quite a risk to the glass, while filter rings often already have to be rightened in preparation for disassembly (as the original poster discovered).
Wood templates and a wood chisel are more gentle and effective to dent out filter rings on a assembled lens. Filter ring vices tend to break more front lenses, and are better used only after everything has been taken apart. _________________ Sevo |
|
| 返回顶部 |
|
 |
xjjohnno
 注册时间: 2009年4月7日 文章: 1270 来自: Melbourne Australia
Expire: 2011-11-18
|
 发表于: 周四 12月 31, 2009 8:17 pm 文章标题: |
|
 发表于: 周四 12月 31, 2009 8:17 pm 文章标题: |
|
|
xjjohnno wrote:
Photomac, I don't suppose you could scan that leaflet at all? |
|
| 返回顶部 |
|
 |
Photomac
注册时间: 2008年1月11日 文章: 47 来自: Sutton Benger, UK
|
 发表于: 周四 12月 31, 2009 8:26 pm 文章标题: |
|
 发表于: 周四 12月 31, 2009 8:26 pm 文章标题: |
|
|
Photomac wrote:
Hello there,
Scanning it would be no problem, I need to find it first!
I know you are itching to get on with things, but let me get New Year out of the way first, and I'll get it to you as soon as I can. It's past your New Year now, isn't it, so Happy New Year to you, and all forum members.
Regards
Angus |
|
| 返回顶部 |
|
 |
xjjohnno
 注册时间: 2009年4月7日 文章: 1270 来自: Melbourne Australia
Expire: 2011-11-18
|
 发表于: 周四 12月 31, 2009 11:04 pm 文章标题: |
|
 发表于: 周四 12月 31, 2009 11:04 pm 文章标题: |
|
|
xjjohnno wrote:
Yep the year is well on the way here, enjoy brining in 2010. |
|
| 返回顶部 |
|
 |
unclemack
 注册时间: 2009年6月21日 文章: 51 来自: UK frozen north
|
 发表于: 周六 1月 02, 2010 5:09 pm 文章标题: |
|
 发表于: 周六 1月 02, 2010 5:09 pm 文章标题: |
|
|
unclemack wrote:
I've previously seen the eBay listing for this tool and it looks, well, sort of OK - but don't forget it presses just as hard on both sides...
Protect the front element before you do anything else!
Better to pad the faces of the tool with strips of plastic for the first expansion of a badly-dented ring until it's almost there - and for the final press I would use cut pieces from an old filter instead of the pads, using its threads to "fill up" the threads of the lens. A tiny smear of lubricant helps. Pressing a flat, even though curved, metal surface against fine threads can easily damage them.
I used to use a pair of water pump pliers with the jaws ground to a curve, cut pieces of filter and curved hardwood packing pieces of various sizes made as required to fit the outside of the lens' filter ring. Blu-tack and thick cardboard to protect the glass if you don't have anything better.
To remove a jammed-on filter that is NOT cross-threaded I haven't found anything better than Boa Constrictor tools - never failed - sometimes I've had to use two of them together, one on the lens & one on the filter. In opposite directions of course.The only part of the lens safe to grip is the part the filter screws into, anywhere else and your lens may be damaged beyond repair.
The Boa Constrictors will remove cross-threaded filters and since there is already damage to the threads you might want to take the easy way and just unscrew it.For an expensive lens I would usually cut the filter out with a Dremel and a tiny blade and a LOT of care. Too many variables to walk you through the process but glass first, two cuts 6-7mm. apart, twist with snipe-nose pliers.
If you don't understand then you should use the Boa. _________________ untitled |
|
| 返回顶部 |
|
 |
Photomac
注册时间: 2008年1月11日 文章: 47 来自: Sutton Benger, UK
|
 发表于: 周六 1月 16, 2010 10:16 am 文章标题: |
|
 发表于: 周六 1月 16, 2010 10:16 am 文章标题: |
|
|
Photomac wrote:
Hello there,
Still can't find the leaflet for the rim-straightening tool! I will keep looking but it doesn't say any more than I described, and doesn't have diagrams or anything like that, so you are not really missing anything.
Regards
Angus |
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|