| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周二 1月 19, 2010 2:02 am 文章标题: Plustek 7200 |
|
 发表于: 周二 1月 19, 2010 2:02 am 文章标题: Plustek 7200 |
|
|
Attila wrote:
Is it worth to take it ? |
|
| 返回顶部 |
|
 |
Katastrofo
 注册时间: 2007年2月26日 文章: 10405 来自: USA
Expire: 2013-11-19
|
 发表于: 周二 1月 19, 2010 2:40 am 文章标题: |
|
 发表于: 周二 1月 19, 2010 2:40 am 文章标题: |
|
|
Katastrofo wrote:
Attila, it's not going to be a quantum leap from your V500. If you want to
run with the big dogs, it's Coolscan all the way... |
|
| 返回顶部 |
|
 |
cooltouch
 注册时间: 2009年1月15日 文章: 9096 来自: Houston, Texas
|
 发表于: 周二 1月 19, 2010 3:46 am 文章标题: |
|
 发表于: 周二 1月 19, 2010 3:46 am 文章标题: |
|
|
cooltouch wrote:
| Katastrofo 写道: |
Attila, it's not going to be a quantum leap from your V500. If you want to
run with the big dogs, it's Coolscan all the way... |
Just curious -- have you tried the Plustek yet? I've read a number of reviews on the various Plustek 7200 scanners, and the reviewers all seem to rate it higher than flatbeds in terms of image sharpness. D-Max, opinions seem to differ.
I haven't found any reviews yet that test the Plustek for its actual resolution, but there's bound to be at least one out there somewhere. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| 返回顶部 |
|
 |
Katastrofo
 注册时间: 2007年2月26日 文章: 10405 来自: USA
Expire: 2013-11-19
|
 发表于: 周二 1月 19, 2010 5:22 am 文章标题: |
|
 发表于: 周二 1月 19, 2010 5:22 am 文章标题: |
|
|
Katastrofo wrote:
Michael, no, haven't tried one. I was thinking about getting one a year
ago (Tiger Direct had them for $200, shipping included). But after reading
several discussions at Photo.net, APUG, etc. I wasn't overly impressed with their findings, or the examples they posted. There was a scanner
that I was trying to get, but is only available in Europe for something like
$379, will check to see if I can find the info on it. Its results did impress
me.
Here's a small discussion of the Plustek on the other forum:
http://forum.manualfocus.org/viewtopic.php?id=12219
The one problem I have is not enough room on my desk for both flatbed
and 35mm film scanner. If I was to say goodbye to medium format, I'd
be after a Coolscan V ED or 5000 series. As I remember, the Plustek fell
down when it came to slides. |
|
| 返回顶部 |
|
 |
ludoo
 注册时间: 2009年9月18日 文章: 1397 来自: Milan, Italy
Expire: 2011-12-05
|
 发表于: 周二 1月 19, 2010 6:37 am 文章标题: |
|
 发表于: 周二 1月 19, 2010 6:37 am 文章标题: |
|
|
ludoo wrote:
I will receive one in the next few days, and can post a few scans. Here are a few from a fellow Italian on flickr, using the 7300 which should be similar (older model, but with ICE if I'm correct).
最后由 ludoo 于 周五 3月 12, 2010 10:55 pm 编辑;共编辑 2 次 |
|
| 返回顶部 |
|
 |
eeyore_nl
 注册时间: 2008年11月9日 文章: 837 来自: Netherlands
|
 发表于: 周二 1月 19, 2010 6:47 am 文章标题: |
|
 发表于: 周二 1月 19, 2010 6:47 am 文章标题: |
|
|
eeyore_nl wrote:
| Katastrofo 写道: |
There was a scanner
that I was trying to get, but is only available in Europe for something like
$379, will check to see if I can find the info on it. Its results did impress
me.
|
That would be nice! _________________ Fujifilm X-Pro2 / Fujifilm X-T1 / some Sonnar & Takumar lenses |
|
| 返回顶部 |
|
 |
martinsmith99
 注册时间: 2008年8月31日 文章: 7029 来自: S Glos, UK
Expire: 2013-11-18
|
 发表于: 周二 1月 19, 2010 7:33 am 文章标题: |
|
 发表于: 周二 1月 19, 2010 7:33 am 文章标题: |
|
|
martinsmith99 wrote:
I was torn between the Plustek & the V500. Lack of reviews on the Plustek led me to buy the V500. _________________ Casual attendance these days |
|
| 返回顶部 |
|
 |
Katastrofo
 注册时间: 2007年2月26日 文章: 10405 来自: USA
Expire: 2013-11-19
|
 发表于: 周二 1月 19, 2010 7:45 am 文章标题: |
|
 发表于: 周二 1月 19, 2010 7:45 am 文章标题: |
|
|
Katastrofo wrote:
| eeyore_nl 写道: |
| Katastrofo 写道: |
There was a scanner
that I was trying to get, but is only available in Europe for something like
$379, will check to see if I can find the info on it. Its results did impress
me.
|
That would be nice! |
It's the Reflecta (or Reflekta) Crystal Scan 7200, 220Euros. |
|
| 返回顶部 |
|
 |
Orio
注册时间: 2007年2月24日 文章: 29545 来自: West Emilia
Expire: 2012-12-04
|
 发表于: 周二 1月 19, 2010 10:46 am 文章标题: |
|
 发表于: 周二 1月 19, 2010 10:46 am 文章标题: |
|
|
Orio wrote:
Plustek will not do the medium format.
As for sharpness with flatbed, there is a simple way.
Forget about the frame recognition etc
And forget about film holders.
Set the scanner not to use any of that.
Then buy a piece of antinewton glass as large as your need (but not larger than the surface of the scanner) and make of your film a sandwich between the scanner's glass surface and your antinewton glass.
Voilà: perfect sharpness.
You will have of course to select/crop around the image manually. No big deal and surely a good trade off for the quality. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| 返回顶部 |
|
 |
eeyore_nl
 注册时间: 2008年11月9日 文章: 837 来自: Netherlands
|
 发表于: 周二 1月 19, 2010 11:39 am 文章标题: |
|
 发表于: 周二 1月 19, 2010 11:39 am 文章标题: |
|
|
eeyore_nl wrote:
| Orio 写道: |
Then buy a piece of antinewton glass as large as your need (but not larger than the surface of the scanner) and make of your film a sandwich between the scanner's glass surface and your antinewton glass.
Voilà: perfect sharpness.
You will have of course to select/crop around the image manually. No big deal and surely a good trade off for the quality. |
Orio, that sounds very interesting! What would you suggest for backlighting then? _________________ Fujifilm X-Pro2 / Fujifilm X-T1 / some Sonnar & Takumar lenses |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周二 1月 19, 2010 12:14 pm 文章标题: |
|
 发表于: 周二 1月 19, 2010 12:14 pm 文章标题: |
|
|
Attila wrote:
Thank you ! Somebody selling it locally on low price, so reason is , because not so good scanner... I will try anti-newton glass.. |
|
| 返回顶部 |
|
 |
Orio
注册时间: 2007年2月24日 文章: 29545 来自: West Emilia
Expire: 2012-12-04
|
 发表于: 周二 1月 19, 2010 1:50 pm 文章标题: |
|
 发表于: 周二 1月 19, 2010 1:50 pm 文章标题: |
|
|
Orio wrote:
| eeyore_nl 写道: |
| Orio 写道: |
Then buy a piece of antinewton glass as large as your need (but not larger than the surface of the scanner) and make of your film a sandwich between the scanner's glass surface and your antinewton glass.
Voilà: perfect sharpness.
You will have of course to select/crop around the image manually. No big deal and surely a good trade off for the quality. |
Orio, that sounds very interesting! What would you suggest for backlighting then? |
Your scanner will do the backlighting, hence why the antinewton glass - of course it must be a scanner that is capable of scanning film. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| 返回顶部 |
|
 |
Orio
注册时间: 2007年2月24日 文章: 29545 来自: West Emilia
Expire: 2012-12-04
|
 发表于: 周二 1月 19, 2010 1:52 pm 文章标题: |
|
 发表于: 周二 1月 19, 2010 1:52 pm 文章标题: |
|
|
Orio wrote:
| Attila 写道: |
| Thank you ! Somebody selling it locally on low price, so reason is , because not so good scanner... |
Based on what I read, the resolvance is slightly superior to that of flatbed Epson film scanners.
But I think in practice you will not see any significant betterment.
Plus the fact that it does not medium format it's a heavy limitation in my opinion. Unless of course you want to also keep the flatbed scanner. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| 返回顶部 |
|
 |
Katastrofo
 注册时间: 2007年2月26日 文章: 10405 来自: USA
Expire: 2013-11-19
|
 发表于: 周二 1月 19, 2010 5:26 pm 文章标题: |
|
 发表于: 周二 1月 19, 2010 5:26 pm 文章标题: |
|
|
Katastrofo wrote:
| Orio 写道: |
| Attila 写道: |
| Thank you ! Somebody selling it locally on low price, so reason is , because not so good scanner... |
Based on what I read, the resolvance is slightly superior to that of flatbed Epson film scanners.
But I think in practice you will not see any significant betterment.
Plus the fact that it does not medium format it's a heavy limitation in my opinion. Unless of course you want to also keep the flatbed scanner. |
That is what I gleaned from all my reading a year ago and as stated
before, not a quantum leap. And I would have to buy more flat surface
real estate to place it on if I were to buy it.
Attila, the Nikon Coolscan 9000 is the only way to go, since it does both
35mm and 120. I'm sure your wife will understand....  |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周二 1月 19, 2010 5:30 pm 文章标题: |
|
 发表于: 周二 1月 19, 2010 5:30 pm 文章标题: |
|
|
Attila wrote:
| Katastrofo 写道: |
| Orio 写道: |
| Attila 写道: |
| Thank you ! Somebody selling it locally on low price, so reason is , because not so good scanner... |
Based on what I read, the resolvance is slightly superior to that of flatbed Epson film scanners.
But I think in practice you will not see any significant betterment.
Plus the fact that it does not medium format it's a heavy limitation in my opinion. Unless of course you want to also keep the flatbed scanner. |
That is what I gleaned from all my reading a year ago and as stated
before, not a quantum leap. And I would have to buy more flat surface
real estate to place it on if I were to buy it.
Attila, the Nikon Coolscan 9000 is the only way to go, since it does both
35mm and 120. I'm sure your wife will understand....  |
 |
|
| 返回顶部 |
|
 |
Excalibur
 注册时间: 2009年7月19日 文章: 5018 来自: UK
Expire: 2014-04-21
|
 发表于: 周二 1月 19, 2010 5:40 pm 文章标题: |
|
 发表于: 周二 1月 19, 2010 5:40 pm 文章标题: |
|
|
Excalibur wrote:
Quite a good forum for scanners and problems.
http://www.hybridphoto.com/forums/showthread.php?t=1422&highlight=plustek _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| 返回顶部 |
|
 |
Katastrofo
 注册时间: 2007年2月26日 文章: 10405 来自: USA
Expire: 2013-11-19
|
 发表于: 周二 1月 19, 2010 5:59 pm 文章标题: |
|
 发表于: 周二 1月 19, 2010 5:59 pm 文章标题: |
|
|
Katastrofo wrote:
| Orio 写道: |
Plustek will not do the medium format.
As for sharpness with flatbed, there is a simple way.
Forget about the frame recognition etc
And forget about film holders.
Set the scanner not to use any of that.
Then buy a piece of antinewton glass as large as your need (but not larger than the surface of the scanner) and make of your film a sandwich between the scanner's glass surface and your antinewton glass.
Voilà: perfect sharpness.
You will have of course to select/crop around the image manually. No big deal and surely a good trade off for the quality. |
Doug, (Betterscanning) sells a 4"x 8" sheet of ANR glass for $85, what
I paid for my refurbed Epson scanner. As a cautionary tale, do NOT think
picture frame glass that is dull on one side and shiny on the other will
work as well. It doesn't. Dumkin me tried this and the colors, sharpness,
were crap. Additionally it added a haze to the image like the film was
fogged. I wanted to claw my eyes out with a fork after seeing this.
Maybe ANR glass is cheaper in Europe. |
|
| 返回顶部 |
|
 |
Orio
注册时间: 2007年2月24日 文章: 29545 来自: West Emilia
Expire: 2012-12-04
|
 发表于: 周二 1月 19, 2010 6:04 pm 文章标题: |
|
 发表于: 周二 1月 19, 2010 6:04 pm 文章标题: |
|
|
Orio wrote:
| Katastrofo 写道: |
Maybe ANR glass is cheaper in Europe. |
Actually, it is very difficult to find, at least here in Italy.
My solution was to buy two extra AN 6x7 glasses for my Durst enlarger carrier.
What I do is to place one on one side of the strip, and the other one on the other. This way the film is held down flat. The frames in the middle are not glass covered but that does not matter, the light goes through just the same.
The sharpness you achieve this way is stunning. Much better than when you put film in the holders.
I would like to have one piece of AN glass the same size of my scanners' surface, but I was not able to find a commercial source. If any of you know of a commercial source of ANR glass in the EU, please let me know.
- _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| 返回顶部 |
|
 |
ludoo
 注册时间: 2009年9月18日 文章: 1397 来自: Milan, Italy
Expire: 2011-12-05
|
 发表于: 周二 1月 19, 2010 8:31 pm 文章标题: |
|
 发表于: 周二 1月 19, 2010 8:31 pm 文章标题: |
|
|
ludoo wrote:
| Katastrofo 写道: |
| As a cautionary tale, do NOT think picture frame glass that is dull on one side and shiny on the other will work as well. It doesn't. Dumkin me tried this and the colors, sharpness, were crap. Additionally it added a haze to the image like the film was fogged. I wanted to claw my eyes out with a fork after seeing this. |
Oh crap, maybe that's why my 4490 produces such awfully blurry scans...
Orio, what kind of negative holder did you buy that has antinewton glass inside? |
|
| 返回顶部 |
|
 |
Orio
注册时间: 2007年2月24日 文章: 29545 来自: West Emilia
Expire: 2012-12-04
|
 发表于: 周二 1月 19, 2010 9:03 pm 文章标题: |
|
 发表于: 周二 1月 19, 2010 9:03 pm 文章标题: |
|
|
Orio wrote:
| ludoo 写道: |
Orio, what kind of negative holder did you buy that has antinewton glass inside? |
The one that fits my enlarger, the Durst 605.
But it does not matter which type, for scanner use you can get any that will cover at least one frame of the film you use.
It does not even have to be an enlarger glass, you can buy much cheaper slide frames with antinewton glass, like those of Gepe. I bought the Durst glasses because I have a double use for them, otherwise I would have bought the Gepe slide frames. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周二 1月 19, 2010 9:22 pm 文章标题: |
|
 发表于: 周二 1月 19, 2010 9:22 pm 文章标题: |
|
|
Attila wrote:
| Orio 写道: |
| Katastrofo 写道: |
Maybe ANR glass is cheaper in Europe. |
Actually, it is very difficult to find, at least here in Italy.
My solution was to buy two extra AN 6x7 glasses for my Durst enlarger carrier.
What I do is to place one on one side of the strip, and the other one on the other. This way the film is held down flat. The frames in the middle are not glass covered but that does not matter, the light goes through just the same.
The sharpness you achieve this way is stunning. Much better than when you put film in the holders.
I would like to have one piece of AN glass the same size of my scanners' surface, but I was not able to find a commercial source. If any of you know of a commercial source of ANR glass in the EU, please let me know.
- |
What about take glass from a broken scanner ? |
|
| 返回顶部 |
|
 |
ludoo
 注册时间: 2009年9月18日 文章: 1397 来自: Milan, Italy
Expire: 2011-12-05
|
 发表于: 周二 1月 19, 2010 11:10 pm 文章标题: |
|
 发表于: 周二 1月 19, 2010 11:10 pm 文章标题: |
|
|
ludoo wrote:
Attila, scanner glass is not usually anti-newton.
I found Gepe 6x6 slides holders with anti-newton glass in the UK, a pack of 20 costs 11.99£. The only problem is they appear to only ship to the UK. If there are a few people interested, and an enteprising UK member, we could split a pack and he gets to keep his share for free. Two or three holders each will be enough for most uses, and really cheap even including postage. Anybody up for this? |
|
| 返回顶部 |
|
 |
Xpres
 注册时间: 2007年12月11日 文章: 964 来自: UK
Expire: 2014-10-28
|
 发表于: 周二 1月 19, 2010 11:37 pm 文章标题: |
|
 发表于: 周二 1月 19, 2010 11:37 pm 文章标题: |
|
|
Xpres wrote:
I can order some if you like. Surely Gepe is available all over though? _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| 返回顶部 |
|
 |
ludoo
 注册时间: 2009年9月18日 文章: 1397 来自: Milan, Italy
Expire: 2011-12-05
|
 发表于: 周二 1月 19, 2010 11:55 pm 文章标题: |
|
 发表于: 周二 1月 19, 2010 11:55 pm 文章标题: |
|
|
ludoo wrote:
| Xpres 写道: |
| I can order some if you like. Surely Gepe is available all over though? |
A few searches later, and I found them at the local pro photo store. The good thing is can go pick them up, the bad things are that a) they are backordered, and b) they cost 21€+VAT, so more than double the UK price.
If there's a few people interested we could split a box either from the UK (if Xpres does not mind), or from here. If not, well I guess I'll buy a box anyway. |
|
| 返回顶部 |
|
 |
Xpres
 注册时间: 2007年12月11日 文章: 964 来自: UK
Expire: 2014-10-28
|
 发表于: 周三 1月 20, 2010 12:17 am 文章标题: |
|
 发表于: 周三 1月 20, 2010 12:17 am 文章标题: |
|
|
Xpres wrote:
I don't mind - just give me the word. _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| 返回顶部 |
|
 |
|
|