MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

NIKON F5 - battery problem
查看上一个主题 :: 查看下一个主题  


Reply

Hi,

few weeks ago I bought an unused Nikon F5 body. A great cam with one problem. Within the standard delivery contents is a battery grip for 8 AA batteries. Unfortunately the voltage limit where the cam will work or not is exactly 9.6 V. That means even if the batteries are fully loaded you can only shot 1 or 2 films until the cam means the batteries are too low.

Within the original battery pack (including a charger for approx. 850 € Shocked ) Nikon has "9" cells, so you have a change to shot approx. 20 rolls of film until the 9.6 V limit will be reached.

By the way new battery packs are no longer available - so you have to purchase a used one with all the problems and a used charger as well.

Yesterday - and thats the reason I´m publishing this here - I found this one.

An additional holder for battery #9. Not really cheap but at the end the best solution.

For those who have the same problems with the Nikon F5 battery maybe of interest

点击此处在 eBay.de 上查看

Wink


Reply

Rolf 写道:
Yesterday - and thats the reason I´m publishing this here - I found this one. An additional holder for battery #9. Not really cheap but at the end the best solution.

For those who have the same problems with the Nikon F5 battery maybe of interest

点击此处在 eBay.de 上查看


Thank you! Great info for many of us, I especially would have needed this some years ago when I picked the F100 for power supply reasons (not as good a camera as the F5 which I was tempted by).

I favored the F100 as the original MS-12 AA-type battery holder could be replaced with the (in cold weather especially) much better performing MS-13 battery pack (2 x CR123A).


Reply

Why not acquiring an old battery pack (changing the elements for some new ones lithium) (dead one should be cheap).

That should be the most interesting and cheapest solution (even if you use a professional battery service).


Reply

Blanc 写道:
Why not acquiring an old battery pack (changing the elements for some new ones lithium) (dead one should be cheap).

That should be the most interesting and cheapest solution (even if you use a professional battery service).


Very simple.

1. The old ones costs a lot of money.
2. The cells within this battery pack are NOT standard cells/size (no AA)
3. You have to open the old pack
4. You have to repair the battery pack/most of them the contacts are welded
5. You have to close the old battery pack
.......


Wink


Reply

Rolf 写道:

Very simple.

1. The old ones costs a lot of money.
2. The cells within this battery pack are NOT standard cells/size (no AA)
3. You have to open the old pack
4. You have to repair the battery pack/most of them the contacts are welded
5. You have to close the old battery pack
.......


Wink


Yeah, not exactly a cakewalk, is it? Laughing Sorry to hear your troubles, Rolf.
Sophie shot the F5 in the movie lafidélité, and it had an LCD screen on the
back, left side:



I should shoot a picture of the back some time. From what I hear, they
are an awesome camera!


Reply

Use alkaline AA in grip 8x1.5V=12V

Given popularity of F5 somebody must offer rebuild service at reasonable cost. Check at Nikonians.org ?

solder together individual correct-size cells yourself:

http://www.aspencer1.com/cat_featured_items.asp?cat1=50&cat=2&id=558&uid=1910

battery pack cell replacement is much easier using a pre-assembled packs such as those available for RC uses:

http://www.aspencer1.com/cat_featured_items.asp?cat1=12&cat=2&id=113&uid=1038 (further searching at other websites should turn over correct size pack)

or rebuild service:

http://www.nicdladyonline.com/sendingus.html

nicadlady and many other companies worldwide offer custom pack building at low cost of assembly typically around US$1 per connection if commonly available configuration is not in stock:

http://www.nicdlady.com/


Reply

Thanks for the links. Unfortunately all in USA. With shipment, custom duty etc. at the end not cheaper for us poor boys here at Germany.

Anyway a good tipp for other opportunities. Thanks for sharing.

Wink


Reply

Wow Bill.

What a woman and what a cam/lens (I hope the sequence is ok ?? Laughing Laughing Laughing )

F5 with LCD ? Mayba a prototype ?

Wink


Reply

Rolf:

http://www.mir.com.my/rb/photography/hardwares/classics/NikonF5/MF28Manual/index.htm


Reply

Yes, of course Bill. I have forgotten this part.

I have a MF-27 at my cam.
In the meantime the problem with the battery is solved and it is a pleasure to work with this cam.


Wink


Reply

I'm not sure what the original pack voltage was, but perhaps the rechargeable 1.6v NiZn AA's would be another solution?

This would bring you back to an even number of cells, simplifying the charging routine. Wink


Reply

Scheimpflug 写道:
I'm not sure what the original pack voltage was, but perhaps the rechargeable 1.6v NiZn AA's would be another solution?

This would bring you back to an even number of cells, simplifying the charging routine. Wink


Yes, I have read this in another forum. But 8 x NiZn is fully loaded 8x 1,85 V, so something more than 14 Volt and that was me to "hot".

But it seems, that the F5 will work with this without any damage. So seems to be another solution.



Wink