| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
pirius
 注册时间: 2009年5月28日 文章: 133 来自: SoFla
|
 发表于: 周一 12月 13, 2010 7:33 pm 文章标题: Disassembling Meyer-Optik Primoplan 58/1.9 |
|
 发表于: 周一 12月 13, 2010 7:33 pm 文章标题: Disassembling Meyer-Optik Primoplan 58/1.9 |
|
|
pirius wrote:
I am trying to clean the internal glass on a newly acquired Primoplan 58/1.9 and I am having problems with disassembling the front part of it. It seems pretty straightforward at first but I can't figure out how to remove the front nameplate. Any ideas? Thanks... |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周一 12月 13, 2010 7:44 pm 文章标题: |
|
 发表于: 周一 12月 13, 2010 7:44 pm 文章标题: |
|
|
Attila wrote:
点击此处在 eBay 上查看
You need this tool or sink stopper (plug) what has exact diameter and made from hard gum. |
|
| 返回顶部 |
|
 |
pirius
 注册时间: 2009年5月28日 文章: 133 来自: SoFla
|
 发表于: 周一 12月 13, 2010 9:12 pm 文章标题: |
|
 发表于: 周一 12月 13, 2010 9:12 pm 文章标题: |
|
|
pirius wrote:
Yeah, that's the one thing that I still don't have. However, I look at the nameplate ring (it is actually a large conical part like in many macro lenses) and it looks like that thread on the filter ring above it is narrower and won't let the ring to come off. I guess it's just an optical illusion  |
|
| 返回顶部 |
|
 |
pirius
 注册时间: 2009年5月28日 文章: 133 来自: SoFla
|
 发表于: 周二 12月 14, 2010 5:27 am 文章标题: |
|
 发表于: 周二 12月 14, 2010 5:27 am 文章标题: |
|
|
pirius wrote:
Update: I was right... The nameplate could only be removed with the front filter ring as a single item. After the small retaining screw on the inner side of the front ring is removed, the entire front part can be unscrewed, which gives the access to the front optical unit. Unscrew that one and you get straight to the diaphragm. The rear optical assembly can also be easily removed with a lens wrench so the diaphragm becomes accessible from both sides. |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周二 12月 14, 2010 1:29 pm 文章标题: |
|
 发表于: 周二 12月 14, 2010 1:29 pm 文章标题: |
|
|
Attila wrote:
| pirius 写道: |
| Update: I was right... The nameplate could only be removed with the front filter ring as a single item. After the small retaining screw on the inner side of the front ring is removed, the entire front part can be unscrewed, which gives the access to the front optical unit. Unscrew that one and you get straight to the diaphragm. The rear optical assembly can also be easily removed with a lens wrench so the diaphragm becomes accessible from both sides. |
It would be nice if you take photos from each steps and publish it here, I think some people will happy to read it and use it when need it. Many thanks in advance! |
|
| 返回顶部 |
|
 |
pirius
 注册时间: 2009年5月28日 文章: 133 来自: SoFla
|
 发表于: 周二 12月 14, 2010 2:20 pm 文章标题: |
|
 发表于: 周二 12月 14, 2010 2:20 pm 文章标题: |
|
|
pirius wrote:
Sorry, I have already assembled it back. But it's easy, there is not much to show. If you look inside the lens from the front you'll see a tiny screw. Loosen it up, then grab the front part of the lens firmly (the filter ring) and unscrew it counter-clockwise. After that it's just a regular disassembly with a spanner wrench.
So the rubber tool was not necessary, but I have ordered it anyway
BTW, I've tried the lens and I think it's awesome! |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周二 12月 14, 2010 2:41 pm 文章标题: |
|
 发表于: 周二 12月 14, 2010 2:41 pm 文章标题: |
|
|
Attila wrote:
| pirius 写道: |
Sorry, I have already assembled it back. But it's easy, there is not much to show. If you look inside the lens from the front you'll see a tiny screw. Loosen it up, then grab the front part of the lens firmly (the filter ring) and unscrew it counter-clockwise. After that it's just a regular disassembly with a spanner wrench.
So the rubber tool was not necessary, but I have ordered it anyway
BTW, I've tried the lens and I think it's awesome! |
No problem, rubber tool is useful. I like this lens too pretty much, congrats for your new tool.
Try to hunting down Helioplan 40mm or 4cm from Meyer it has even better IQ  |
|
| 返回顶部 |
|
 |
valjo
 注册时间: 2008年10月10日 文章: 68 来自: Bulgaria
|
 发表于: 周六 4月 19, 2014 5:13 pm 文章标题: |
|
 发表于: 周六 4月 19, 2014 5:13 pm 文章标题: |
|
|
valjo wrote:
| pirius 写道: |
| Update: I was right... The nameplate could only be removed with the front filter ring as a single item. After the small retaining screw on the inner side of the front ring is removed, the entire front part can be unscrewed, which gives the access to the front optical unit. Unscrew that one and you get straight to the diaphragm. |
| pirius 写道: |
| ... If you look inside the lens from the front you'll see a tiny screw. Loosen it up, then grab the front part of the lens firmly (the filter ring) and unscrew it counter-clockwise. After that it's just a regular disassembly with a spanner wrench. |
I have removed the small retaining screw on the inner side of the front ring but the front part can NOT be unscrewed. I have tried to unscrew it counter-clockwise firmly as i can.
My intention is to clean the diaphragm from excessively oiling.
What to do?
 _________________ Canon D60
3.5/135 Jupiter 37A |
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|