| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周五 4月 08, 2011 9:23 pm 文章标题: FOMA R09 experience |
|
 发表于: 周五 4月 08, 2011 9:23 pm 文章标题: FOMA R09 experience |
|
|
Attila wrote:
I bought an R09 developer made by FOMA is anybody use it ? |
|
| 返回顶部 |
|
 |
marty
 注册时间: 2009年4月9日 文章: 767 来自: Italy
|
 发表于: 周五 4月 08, 2011 9:55 pm 文章标题: |
|
 发表于: 周五 4月 08, 2011 9:55 pm 文章标题: |
|
|
marty wrote:
Hello, Attila. As far as I know is a Rodinal clone (the new Agfa is now calling the R. just R09 ). It's one of the long-lived formulas on the market. Gives good acutance and sharpness at the expense of some graininess. Greater dilutions somewhat tame the problem (if there is one ). Used at dilutions over 1:100 in stand development gives high compensating effect (I never tried this myself). I used the R. (either when it was still called R. and then with the new name R09) with Fp4+ and Delta 100 and what I can say is that I had mixed results. Not fault of the product itself, I think the variations from one roll to another was due to my rather poor measurement of the small quantities of product needed to make working solutions. In the meantime I got myself a medical syringe for a more precise measurement. I'll certainly giving it another shot (no pun intended ), sooner or later.
Cheers, M. _________________ Canon FD
Bodies: AT-1, A-1, T-90
Lenses: nFD 20mm f2.8, 24 f2.8, 28 f2.8, 35 f2, FD 50 f1.8 S.C., 85 f1.8, 100 f2.8, 135 f2.8, 200 f4, 300 f4
|
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周五 4月 08, 2011 9:57 pm 文章标题: |
|
 发表于: 周五 4月 08, 2011 9:57 pm 文章标题: |
|
|
Attila wrote:
Thank you Marty! |
|
| 返回顶部 |
|
 |
marty
 注册时间: 2009年4月9日 文章: 767 来自: Italy
|
 发表于: 周五 4月 08, 2011 10:03 pm 文章标题: |
|
 发表于: 周五 4月 08, 2011 10:03 pm 文章标题: |
|
|
marty wrote:
You're welcome .
Cheers, M. _________________ Canon FD
Bodies: AT-1, A-1, T-90
Lenses: nFD 20mm f2.8, 24 f2.8, 28 f2.8, 35 f2, FD 50 f1.8 S.C., 85 f1.8, 100 f2.8, 135 f2.8, 200 f4, 300 f4
|
|
| 返回顶部 |
|
 |
hexi
 注册时间: 2009年7月1日 文章: 1631 来自: France
Expire: 2011-11-18
|
 发表于: 周六 4月 09, 2011 6:44 am 文章标题: |
|
 发表于: 周六 4月 09, 2011 6:44 am 文章标题: |
|
|
hexi wrote:
It is indeed Rodinal, so i use it.
from my experience, the best dilution i found is 1+25, because it give the better contrats to the negative, otherwise 1+50 is ok if you like a neutral negative renditon
some people say, that Rodinal is not intended , due to the fact that it gives a huge amount of grain with some films. To that all i can say that's from my tests, it depends of the agitation method; i had pushed films up to 1600 and above with smooth grain.
do tests and enjoy  _________________ Happy owner and user of :
SLR's > Contax Aria - RX
DSLR > Canon 5D
Lenses : C/Y Planar 1.4/50 - Distagon 2.8/35 - Planar 1.4/85
http://www.flickr.com/photos/sonnar85 |
|
| 返回顶部 |
|
 |
wupdigoj
 注册时间: 2010年3月18日 文章: 85
|
 发表于: 周一 4月 11, 2011 2:20 pm 文章标题: |
|
 发表于: 周一 4月 11, 2011 2:20 pm 文章标题: |
|
|
wupdigoj wrote:
I used this developer some time ago. It was supposed to work just like Rodinal but with lower dilutions: 1:40 instead of 1:50, 1:80 instead of 1:100 and so on. In my sample the liquid was too much concentrated, so I had to use someting like 1:130 instead of 1:80 (i.e. more dilution than Rodinal). Of course I spoiled several films until I noticed this. Now I use "Agfa Rodinal" which behaves exactly as the original Rodinal.
I have also found lately some QC. problems with Foma films. It is a pity because Foma 100 and 200 are great films, IMO.
Javier
最后由 wupdigoj 于 周一 4月 11, 2011 8:09 pm 编辑;共编辑 1 次 |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周一 4月 11, 2011 3:38 pm 文章标题: |
|
 发表于: 周一 4月 11, 2011 3:38 pm 文章标题: |
|
|
Attila wrote:
Many thanks Javier!! |
|
| 返回顶部 |
|
 |
hexi
 注册时间: 2009年7月1日 文章: 1631 来自: France
Expire: 2011-11-18
|
 发表于: 周一 4月 11, 2011 3:49 pm 文章标题: |
|
 发表于: 周一 4月 11, 2011 3:49 pm 文章标题: |
|
|
hexi wrote:
It's weird, because it is the same developer, with same dilution times than Rodinal. It's just rebadged, and from my experience so far i had no troubles whatsoever, especially with Foma film that i use much : ) _________________ Happy owner and user of :
SLR's > Contax Aria - RX
DSLR > Canon 5D
Lenses : C/Y Planar 1.4/50 - Distagon 2.8/35 - Planar 1.4/85
http://www.flickr.com/photos/sonnar85 |
|
| 返回顶部 |
|
 |
wupdigoj
 注册时间: 2010年3月18日 文章: 85
|
 发表于: 周一 4月 11, 2011 8:18 pm 文章标题: |
|
 发表于: 周一 4月 11, 2011 8:18 pm 文章标题: |
|
|
wupdigoj wrote:
| hexi 写道: |
| It's weird, because it is the same developer, with same dilution times than Rodinal. It's just rebadged, and from my experience so far i had no troubles whatsoever, especially with Foma film that i use much : ) |
I know. The Foma R09 I used was an older one. The new one uses the same developing dilutions as Rodinal. I think F. R09 was supposed to be the "original" Rodinal recipe.
I think that my sample was defective, too much concentrate. Once adjusted the dilution, the results were fine. Of course I suppose most of the batches must be correct.
The issues I have found with Foma films are independent of the developer, and had appeared mainly in Foma 200, 120 format : lots of tiny black dots in the film, which will apper in the copies. At first I thought it to be something related with my technique, but I finally isolated it as a film defect.
Javier |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周一 4月 11, 2011 8:25 pm 文章标题: |
|
 发表于: 周一 4月 11, 2011 8:25 pm 文章标题: |
|
|
Attila wrote:
Good to know guys, thank you. I did use Foma 100 only, with FOMA LQR developer until now. I was very happy with this combo. |
|
| 返回顶部 |
|
 |
piticu
 注册时间: 2008年8月4日 文章: 591 来自: Romania
|
 发表于: 周二 4月 12, 2011 12:39 am 文章标题: |
|
 发表于: 周二 4月 12, 2011 12:39 am 文章标题: |
|
|
piticu wrote:
So why switch? fomapan and lqn/lqr gives great results. plus that they're cheap! _________________ www.atelierelealbe.eu |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周二 4月 12, 2011 12:59 am 文章标题: |
|
 发表于: 周二 4月 12, 2011 12:59 am 文章标题: |
|
|
Attila wrote:
I did bought Agfa APX 100 in bulk (40) rolls and didn't find any clear instructions how can I use Foma developers with Agfa.
So I bought Rodinal . I did try a roll with Foma LQR same dillution , time etc than with Foma. It was fine. Next roll will be develop in Rodinal. |
|
| 返回顶部 |
|
 |
Katastrofo
 注册时间: 2007年2月26日 文章: 10405 来自: USA
Expire: 2013-11-19
|
 发表于: 周一 4月 18, 2011 3:17 pm 文章标题: |
|
 发表于: 周一 4月 18, 2011 3:17 pm 文章标题: |
|
|
Katastrofo wrote:
Fomadon R09 is a good developer, need to order more. I've posted this
before, but this is my result using Legacy Pro 400:
With 100 film, should be even better. |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周一 4月 18, 2011 3:43 pm 文章标题: |
|
 发表于: 周一 4月 18, 2011 3:43 pm 文章标题: |
|
|
Attila wrote:
Nice gray scale right, with ISO 100 I think it will be perfect. |
|
| 返回顶部 |
|
 |
martinsmith99
 注册时间: 2008年8月31日 文章: 7029 来自: S Glos, UK
Expire: 2013-11-18
|
 发表于: 周日 5月 01, 2011 7:25 pm 文章标题: |
|
 发表于: 周日 5月 01, 2011 7:25 pm 文章标题: |
|
|
martinsmith99 wrote:
Rodinal is my usual developer. I use at 1:50 and only agitate slightly once per minute.
I have used with HP5 at box speed, but I tend to pull it a stop or shoot slower films. Grain is acceptable and contrast is fairly low. I can always increase it afterwards if I need better contrast.
This one had harsh flash which I think has been tamed quite effectively:
Chinon_FP4_030 by martinsmith99, on Flickr _________________ Casual attendance these days |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周日 5月 01, 2011 10:49 pm 文章标题: |
|
 发表于: 周日 5月 01, 2011 10:49 pm 文章标题: |
|
|
Attila wrote:
How long did you develop it ? I like result very much.
Yesterday I did use first time R09 1:50 dilution 20C 18 min it was too long, pictures are came out pretty dark. Factory brochure said 1:50 dilution 17min. I had a film from 'unknown' source I decide it to develop a bit longer. |
|
| 返回顶部 |
|
 |
martinsmith99
 注册时间: 2008年8月31日 文章: 7029 来自: S Glos, UK
Expire: 2013-11-18
|
 发表于: 周一 5月 02, 2011 11:00 am 文章标题: |
|
 发表于: 周一 5月 02, 2011 11:00 am 文章标题: |
|
|
martinsmith99 wrote:
| Attila 写道: |
How long did you develop it ? I like result very much.
Yesterday I did use first time R09 1:50 dilution 20C 18 min it was too long, pictures are came out pretty dark. Factory brochure said 1:50 dilution 17min. I had a film from 'unknown' source I decide it to develop a bit longer. |
Thanks
Taken with Chinon CE3 Memotron with Carl Zeiss Jena MC Sonnar 135mm lens, Ilford FP4+ shot at 80iso, developed in 1:50 Rodinal for 10:30 mins, constant inversions for 1st 30 seconds then 2 inversion every minute. _________________ Casual attendance these days |
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|