MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

Jobo CP2
查看上一个主题 :: 查看下一个主题  


Reply

I bought from UK a JOBO CP2 processor to develop slide films Embarassed


Reply

CPE2? Very useful kit as long as you have all the accessories included. Saves a lot on chemicals! ... but you'll have to test your times etc again because of the rotation.


Reply

test times ? need longer or shorter than default ?


Reply

In the past i did lots of C41 with a Jobo CPE and i didn't need to correct development times for rotating development. For B&W, you need a correction that should be figured out by experimenting as B&W is not a fixed process like C41 of E-6.
To use a CPE or CPA for developping films, the 'lift' is the most useful extra to have. It's the most accurate way to make your processing times as accurate as possible. The time for the chemicals to get in of out of the drum are always equal and you will not find yourself struggling with a drum that will not catch the rotating magnet or with an unwilling cap. The drum is always coupled and you simply throw the chemicals in de lift.



Reply

Thank you ! I guess I will use it only for E-6 and C-41 for B&W simple hand held development is fine. Right ? Any benefits from rotating ?


Reply

Attila 写道:
Thank you ! I guess I will use it only for E-6 and C-41 for B&W simple hand held development is fine. Right ? Any benefits from rotating ?


For B&W, you will not have any benefits from rotational development. Some chemicals work so much better when you do not agitate them too much.

Colorchemicals are most made for mechanical development in large machines. Therefor, in smallscale-use like in a Jobo processor, things work better when the chemicals are kept in the same constant movement as they are in large machines, where they are washed around the moving film.
Having good control over your timing and temperature, the E-6 or C41 process is one of the most simple things to do.


Reply

Attila 写道:
Thank you ! I guess I will use it only for E-6 and C-41 for B&W simple hand held development is fine. Right ? Any benefits from rotating ?


You can save on the quantity of chemistry I guess - you don't need to fill the whole tank when it's rotating, and it gets the temperature right.


Reply

Sound is great I hope I can process soon as I can I have 10 rolls exposed slides in fridge Wink


Reply

Processor is arrived today, tested, works well.


Reply

Was it expensive ?


Reply

yinyangbt 写道:
Was it expensive ?


Approx 100 ukp , one of my best investment.


Reply

Very good price , congratulations !


Reply

yinyangbt 写道:
Very good price , congratulations !


time to time come around this price grab one once you see any.


Reply

This is what I am looking at right now .You got it with all the bottles and recipients , or without ?


Reply

yinyangbt 写道:
This is what I am looking at right now .You got it with all the bottles and recipients , or without ?


I got it with three botles, I had to buy one extra for E-6 process, otherways was complete. It did come with 4 35mm rolls capcity tank.
I also bought extra tank cap , they are not close very well, better to fix it with tape at least at first bath even new cap did come off at first bath.


Reply

Is it equipped with the lift ,or you're cearing the tank manually ?


Reply

Perfectly okay, manually.


Reply

Attila 写道:
Perfectly okay, manually.

Wow , so it's perfectly doable by hand ,your own developped films look great !


Reply

yinyangbt 写道:
Attila 写道:
Perfectly okay, manually.

Wow , so it's perfectly doable by hand ,your own developped films look great !


Yes, prove it LOL, buy a very accurate thermometer if you wish to be precise. I found little over step on time or not superb accurate temperature not harm or not much.


Reply

Attila 写道:
yinyangbt 写道:
Attila 写道:
Perfectly okay, manually.

Wow , so it's perfectly doable by hand ,your own developped films look great !


Yes, prove it LOL, buy a very accurate thermometer if you wish to be precise. I found little over step on time or not superb accurate temperature not harm or not much.

Do you find that the CP2 thermostat isn't enough precise and you need to control and suplimentary adjust the temperature ?


Reply

yinyangbt 写道:
Attila 写道:
yinyangbt 写道:
Attila 写道:
Perfectly okay, manually.

Wow , so it's perfectly doable by hand ,your own developped films look great !


Yes, prove it LOL, buy a very accurate thermometer if you wish to be precise. I found little over step on time or not superb accurate temperature not harm or not much.

Do you find that the CP2 thermostat isn't enough precise and you need to control and suplimentary adjust the temperature ?


Keep temperature precisely once it is set, but scale is not precise on button, easy to set 37,5 instead of 38.0 if you not use external control.


Reply

Aha, thanks , I see .