| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
cooltouch
 注册时间: 2009年1月15日 文章: 9096 来自: Houston, Texas
|
 发表于: 周三 6月 29, 2011 6:44 pm 文章标题: Removing Battery Corrosion |
|
 发表于: 周三 6月 29, 2011 6:44 pm 文章标题: Removing Battery Corrosion |
|
|
cooltouch wrote:
I have obtained a motor drive with a battery pack that had batteries left in it too long. I think they were NiCads that leaked, but don't hold me to that. The corrosion sure looks the same as if it were done by regular batteries.
I vaguely recall recipes for removing corrosion -- like vinegar or baking soda? Using an old toothbrush?
So, just wondering if you might know a tried-and-true method for getting rid of it. It's pretty heavy in a couple of spots. Out of four electrical contacts, only one has any corrosion on it. I don't think I'll have to dismantle the pack to see if corrosion has wicked up the contact's wire -- at least I hope I won't. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| 返回顶部 |
|
 |
ludoo
 注册时间: 2009年9月18日 文章: 1397 来自: Milan, Italy
Expire: 2011-12-05
|
 发表于: 周三 6月 29, 2011 6:56 pm 文章标题: |
|
 发表于: 周三 6月 29, 2011 6:56 pm 文章标题: |
|
|
ludoo wrote:
I use sanding paper on the contacts  _________________ My galleries
Digital: Samsung EX-1
Past Digital: Samsung NX10, Sigma SD9, Sigma SD10, SD14, DP2, Pentax *istD, Kx, Fuji S2 Pro, Canon 5D
Analog: packfilm Polaroids, 6x9 Kodak folders, Pentacon Taxona half-frame, Fujica ST605n, Walz Envoy, Olympus 35 S-II, Olympus Wide S
Past Analog: Polaroid 600se, Polaroid 110B, Canon IIF, various fixed-lens and Russian rangefinders, ...
Past Lenses: Nikkor 24/2.8, Nikkor SC 50/1.4, Nikkor 50/2, Nikkor H 85/1.8, Nikkor P 105/2.5, Nikkor Q 135/3.5, Fujinon 100/2.8, Fujinon EBC 100/2.8, Fujinon EBC 135/3.5, Fujinon EBC 200/4.5, Mamiya SX 135/2.8, CZJ Flektogon 35/2.4, CZJ Pancolar 50/1.8 zebra, CZJ Sonnar 135/3.5, ...
altroformato
|
|
| 返回顶部 |
|
 |
RioRico
 注册时间: 2010年3月12日 文章: 1120 来自: California or Guatemala or somewhere
|
 发表于: 周三 6月 29, 2011 7:14 pm 文章标题: Re: Removing Battery Corrosion |
|
 发表于: 周三 6月 29, 2011 7:14 pm 文章标题: Re: Removing Battery Corrosion |
|
|
RioRico wrote:
| cooltouch 写道: |
| I vaguely recall recipes for removing corrosion -- like vinegar or baking soda? Using an old toothbrush? |
That is what works for me. BS & H20, then vinegar. Scrub-a-dub-dub. _________________ Too many film+digi cams+lenses, oh my -- Pentax K20D, K-1000, M42s, more
The simple truth is this: There are no neutral photographs. --F-Stop Fitzgerald |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周三 6月 29, 2011 8:41 pm 文章标题: |
|
 发表于: 周三 6月 29, 2011 8:41 pm 文章标题: |
|
|
iangreenhalgh1 wrote:
Isopropyl alcohol to clean it up then a quick rub with fine emery paper to ensure electrical contact. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周三 6月 29, 2011 9:17 pm 文章标题: |
|
 发表于: 周三 6月 29, 2011 9:17 pm 文章标题: |
|
|
Attila wrote:
First vinegar it will be remove green stuff second step is very fine sand paper if vinegar wasn't enough. |
|
| 返回顶部 |
|
 |
cooltouch
 注册时间: 2009年1月15日 文章: 9096 来自: Houston, Texas
|
 发表于: 周三 6月 29, 2011 10:30 pm 文章标题: |
|
 发表于: 周三 6月 29, 2011 10:30 pm 文章标题: |
|
|
cooltouch wrote:
Thanks, guys. I posted this same message at a local forum, and one fellow suggested Coke or Pepsi. Well that got me intrigued, and I figured any carbonated soda-type beverage would work, so I used some Mountain Dew. Wow, it worked great! Poured a little on the corrosion and it foamed and bubbled and I was able to just wipe away most of it. There was some heavier scale that I was able to remove easily with a knife. So, all taken care of. Sort of.
After putting the battery holders back into the pack, I checked for voltage across its contacts where it hooks up to the drive. No voltage. Grrr... So, I guess there was some corrosion that wicked up that one contact's wire. I'll probably have to open it up and replace that wire before I'll be able to get it to work. Oh well, I can't complain. I didn't pay anything for it. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| 返回顶部 |
|
 |
OM
 注册时间: 2010年1月15日 文章: 166 来自: Southern England
|
 发表于: 周三 6月 29, 2011 10:53 pm 文章标题: |
|
 发表于: 周三 6月 29, 2011 10:53 pm 文章标题: |
|
|
OM wrote:
| Attila 写道: |
| First vinegar it will be remove green stuff second step is very fine sand paper if vinegar wasn't enough. |
That's how I do it - I use the white distilled vinegar.
Vodka is clear for a reason  |
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|