MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

Nikon FE2 Issue
查看上一个主题 :: 查看下一个主题  


Reply

So I got a Nikon FE2 tonight. It was as-is, and free, so the price was fair. However, it only works in B and M250 mode. All other shutter speeds, the mirror locks up but the shutter won't fire. I need help diagnosing this. Here are some additional things:

1- This happens even when the film counter advances past "1"
2- I put in two new sets of batteries and cleaned the contacts with a Q-tip and rubbing alcohol.
3- The meter is not 100% responsive. It jitters up and down to different light levels, but always hovers above the "B" and "M" marks on the bottom of the meter.
4- Everything else on the camera seems to be fine. It's clean; the shutter blades are fine.

I did an Internet search and every site seems to say "just replace the batteries" or "clean the battery contact" and all will be fine. This problem is often linked to an MD-11 or MD-12 winder, but no winder came with the camera (which is not to say a winder was never used.)

Anyone have any ideas?


Reply

Coroded wire going to the battery contact?


Reply

As an extra precaution you might need to check the condition of the md contacts as well, if not done already.
Nevertheless, I rather suspect a pc problem.


Reply

Since the meter is active but the shutter won't fire then it's not just a battery
contact issue.

So, not likely to be something easily fixed.

I would keep it for parts and find another working body.


Reply

Put a roll of film in it.