MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

Contax 167MT problem
查看上一个主题 :: 查看下一个主题  


Reply

I recently purchased a Contax 167MT. It is in lovely condition but the automatic wind on mechanism seems to be working incorrectly. The occasional noise from it is either extended, slower or a different pitch and on the two test rolls I ran through the camera the image sometimes has a trail leading from the frame into the next. It would seem that it is winding on a little prematurely, all exposures are fine still apart from when the trail leads in and make them unusable

I have already replaced this camera now with another 167MT and did a deal with the seller to keep the non working one. It seems a shame for a camera in its condition to be sentenced to the cupboard for spares and wonder if anyone has an thoughts or advice if this is a simply resolved problem.

Thank you
Stephen


Reply

The 167 MT is an all electronic camera and should therefore committed to a service centre that may have the spare parts for it. Best choice is the company that used to be the local importer of Contax/Yashica products (in Italy is the FOWA company).


Reply

Well that most definitely sounds like it'll cost more than what the camera is worth fully working. Looks like I'll finding it a cosy home in a dark place.

Stephen


Reply

Sorry. That's also where all of our mega digital cameras will go one day.
While the Contax II, Rolleiflex, M3, FM2, Contarex et c. will live on happily.
Twisted Evil


Reply

Yes this is true. Never mind, I paid very little for it and at the least I have some cosmetic spares and a focus screen Smile