| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
std
 注册时间: 2010年2月9日 文章: 1826 来自: Bulgaria
|
 发表于: 周三 6月 27, 2012 1:08 pm 文章标题: Jupiter 9 Kiev - dissasembly? |
|
 发表于: 周三 6月 27, 2012 1:08 pm 文章标题: Jupiter 9 Kiev - dissasembly? |
|
|
std wrote:
I've got an early Jupiter 9 in Kiev mount and i want to take it apart and clean it.
The body is very dirty and grease need to be changed as the focusing is very stif.
Also the lens flares so much to an extent it is almost unusable. Stopping down just makes things even worse.
I guess it can benefit from a cleaning of the glass and maybe some black paint on the inside.
This is what i have found so far but it's not complete - i also need to dismantle the lens block
http://www3.telus.net/public/rpnchbck/Jupiter-9%20dismantle.html
Can someone direct me to a similar tutorial where it is shown how to dismantle the front part too.
Thanks _________________ Stefan
My lens list:
SLR MD: Rokkor 1,7/50 Exakta: Kilfitt-Makro-Kilar E 3.5/4cm; CZJ 2/50 Pancolar;M42: CZJ 2.8/50 Tessar; Mir-1B 2.8/37; Jupiter-9 2/85 T-mount: Tamron 5.9/200; Tamron 6.9/300; Tamron 7.5/400 C-mount: Cosmicar 1.8/50 Y/S: Sun 3.5/38-90, Sun 4/70-210 RF Contax RF: Jupiter-8 2/50; Contax G:CZ 2,8/21 Biogon T; CZ 2,8/28 Biogon T; CZ 2/35 Planar T; CZ 2/45 Planar T; CZ 2,8/90 Sonnar T |
|
| 返回顶部 |
|
 |
themoleman342
 注册时间: 2007年10月21日 文章: 2190 来自: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 发表于: 周三 6月 27, 2012 1:50 pm 文章标题: |
|
 发表于: 周三 6月 27, 2012 1:50 pm 文章标题: |
|
|
themoleman342 wrote:
Removing the front part should just be standard procedure. Take off nameplate. Front element should pop out. Spacer. Element group. The back elements should come off as an entire block. |
|
| 返回顶部 |
|
 |
std
 注册时间: 2010年2月9日 文章: 1826 来自: Bulgaria
|
|
| 返回顶部 |
|
 |
themoleman342
 注册时间: 2007年10月21日 文章: 2190 来自: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 发表于: 周三 6月 27, 2012 7:50 pm 文章标题: |
|
 发表于: 周三 6月 27, 2012 7:50 pm 文章标题: |
|
|
themoleman342 wrote:
I think take screw #2 out. Then the chrome portion should unscrew counterclockwise. |
|
| 返回顶部 |
|
 |
std
 注册时间: 2010年2月9日 文章: 1826 来自: Bulgaria
|
 发表于: 周三 6月 27, 2012 8:13 pm 文章标题: |
|
 发表于: 周三 6月 27, 2012 8:13 pm 文章标题: |
|
|
std wrote:
OK i have successfully unscrewed also 1, 2 and 3 and removed the black ring and the back lens group.
Still i can't figure out how to remove the front group which is before the aperture.
#1
Seems that the front part ( the shiny one) is made of two pieces but i can't unscrew them. _________________ Stefan
My lens list:
SLR MD: Rokkor 1,7/50 Exakta: Kilfitt-Makro-Kilar E 3.5/4cm; CZJ 2/50 Pancolar;M42: CZJ 2.8/50 Tessar; Mir-1B 2.8/37; Jupiter-9 2/85 T-mount: Tamron 5.9/200; Tamron 6.9/300; Tamron 7.5/400 C-mount: Cosmicar 1.8/50 Y/S: Sun 3.5/38-90, Sun 4/70-210 RF Contax RF: Jupiter-8 2/50; Contax G:CZ 2,8/21 Biogon T; CZ 2,8/28 Biogon T; CZ 2/35 Planar T; CZ 2/45 Planar T; CZ 2,8/90 Sonnar T |
|
| 返回顶部 |
|
 |
std
 注册时间: 2010年2月9日 文章: 1826 来自: Bulgaria
|
 发表于: 周三 6月 27, 2012 8:28 pm 文章标题: |
|
 发表于: 周三 6月 27, 2012 8:28 pm 文章标题: |
|
|
std wrote:
| themoleman342 写道: |
| I think take screw #2 out. Then the chrome portion should unscrew counterclockwise. |
You were right!
Thanks a lot
After cooling it a bit in the freezer i was able to finally unscrew it.
and now i have 2 pieces  _________________ Stefan
My lens list:
SLR MD: Rokkor 1,7/50 Exakta: Kilfitt-Makro-Kilar E 3.5/4cm; CZJ 2/50 Pancolar;M42: CZJ 2.8/50 Tessar; Mir-1B 2.8/37; Jupiter-9 2/85 T-mount: Tamron 5.9/200; Tamron 6.9/300; Tamron 7.5/400 C-mount: Cosmicar 1.8/50 Y/S: Sun 3.5/38-90, Sun 4/70-210 RF Contax RF: Jupiter-8 2/50; Contax G:CZ 2,8/21 Biogon T; CZ 2,8/28 Biogon T; CZ 2/35 Planar T; CZ 2/45 Planar T; CZ 2,8/90 Sonnar T |
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|