MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

Looking for K to EOS adapter of correct thickness
查看上一个主题 :: 查看下一个主题  


Reply

I purchased a K to EOS adapter from a reputable seller on ebay but it seems that it is too thin. It focuses past infinity. I have found reviews of just about all of the ones I can find saying basically the same thing or that they are too thick and can't focus to infinity. Does anyone make one of the correct thickness so my focus marks will be correct and I can simply set my lens to infinity to focus at infinity?

Thanks,
Jess


Reply

jessh 写道:
It focuses past infinity.


You could say it was a buzz lightyear then i.e. "To infinity... and beyond!" Smile


Reply

jessh 写道:
I purchased a K to EOS adapter from a reputable seller on ebay but it seems that it is too thin. It focuses past infinity. I have found reviews of just about all of the ones I can find saying basically the same thing or that they are too thick and can't focus to infinity. Does anyone make one of the correct thickness so my focus marks will be correct and I can simply set my lens to infinity to focus at infinity?

Thanks,
Jess

As I was told when I first joined this forum, it's better to focus beyond infinity than to not reach it at all.
These adapters are not perfect but they do a reasonable job. I think only one of my lens+adapter combos actually hits infinity exactly and I have 2 dozen lens+adapter combos. It's not a perfect world but we get by. Wink


Reply

But I want perfection Smile It seems that the adapter manufacturers initially erred on the side of making the adapters too thick. As a result they would not focus to infinity. When they decided to fix the problem instead of figuring out what the thickness actually should be they simply chopped off a couple tenths of a mm and called it a day. Unfortunately that gives us the opposite problem.

The adapter I currently have is from big_is and is about 1.3mm thick. It should be 1.46mm thick. I have been messaging him about the problem and he has been very nice but seems reluctant to fix it since he has been selling them for years and this is the first time anyone has complained. Interestingly the m42 adapter I have from him is basically the correct thickness. If you want an adapter of the correct thickness so that focus marks will be correct and you don't lose close focus abilities than please message him so that he knows there is a market for it.

Of course not all still lenses are going to be perfectly accurate on this anyway but they will be a whole lot closer when the lens mount is the right distance from the film plane. Currently I am contemplating disassembling all of my lenses and adjusting the focus racks so that the marks are correct......

SonicScot,
What adapter do you have that is correct?

~Jess


Reply

I mostly use big_is for my adapters and only one has failed do far. The one adapter which hits infinity is from big_is too, an M42 to EOS adapter without AF confirmation. It's the last adapter I bought from them so maybe they are getting closer with each new model.
This is the one 点击此处在 eBay 上查看

I'm not going to claim it will work as well for everyone and every lens, it just so happens that it works perfectly on my new Tair-3.
Plus. for only $3.50 you can't complain. Cool