MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

Too old look
查看上一个主题 :: 查看下一个主题  


Reply

I tried some 1969 expired Ilford FP 3 with my Nettar 515/16. Developed it too cold but propably also for too long. The I put it into stantard flatbed scanner backed by white paper and got me nice 700x700 pictures.

Purpose was to get something you could see from the 1920's to about 1950's.

But instead I have reached the quality of first wet-plate pioneers, really don't have a clue what went so terribly wrong. Very Happy

#1 impressionistic



#2 this is the only even sligthly acceptable



#3 Daguerre would have tossed this one to the bin and probably stopped experimenting



#4 yes, it is a locomotive, but you can't see the rails



#5 even succeeded creating a double exposure



Reply

I would say you have accomplished a convincing imitation!


Reply

Some of the problems are obviously scanning, because negatives aren't that bad when I took a photo thru window.

Which one is it: old film or some bad processing?

No pp here (except the negative conversion by Gimp).





this is what the negative looks like.



Reply

Film wasn't stored properly and perhaps fixing wasn't enough long too, this is my guess.


Reply

I shot some 1985 expired improperly stored FP4 a few days ago. Results were not bad.

I rated it at ISO 64 as it would have lost speed, but seems it is still 80-100 ISO (originally 125).

When you try again, rate the film at half it's speed and push the developing a little, say 10%.

Fixer, leave it in twice the time stated, won't do any harm, seems to me your first results are under-fixed.


Reply

iangreenhalgh1 写道:
Fixer, leave it in twice the time stated, won't do any harm, seems to me your first results are under-fixed.


Ok, I did fix it for 10 minutes, maybe the cold temperature was to blame too ..

Any idea why the spots?


Reply

iangreenhalgh1 写道:
I shot some 1985 expired improperly stored FP4 a few days ago. Results were not bad.

I rated it at ISO 64 as it would have lost speed, but seems it is still 80-100 ISO (originally 125).

When you try again, rate the film at half it's speed and push the developing a little, say 10%.


Overexpose and overdevelop both?

So this film is from 1969 125-200 ASA (yes the package says 125-200) - I should treat it as 50?


Reply

I think b&w film not loose it's speed. I did develop successfully similar aged films ISO50 , ISO100 films I also got crap result too, so evidence to me , storage is very important. I got similar crap like yours when I did fix for short time and once on fresh efke film reason is still unknown to me.


Reply

Looks as though it has gotten too warm a time or two in storage . I've had a roll or three come out badly when left in my truck in the summer .


Reply

kansalliskala 写道:
iangreenhalgh1 写道:
I shot some 1985 expired improperly stored FP4 a few days ago. Results were not bad.

I rated it at ISO 64 as it would have lost speed, but seems it is still 80-100 ISO (originally 125).

When you try again, rate the film at half it's speed and push the developing a little, say 10%.


Overexpose and overdevelop both?

So this film is from 1969 125-200 ASA (yes the package says 125-200) - I should treat it as 50?


Well, I shot the fp4 I have at 64 then developed it for 11 mins instead of the 10 on the instruction sheet for the developer.

Worked okay, doesn't seem to have lost a great deal of speed, it would probably be fine rated at 100.




Reply

Thank you very much for valuable information!

Could someone move this to 'darkroom' section. What started as experiment produced some real knowledge.


Reply

maybe some of the problem is how you scanned your film. I have had similar problem scanning negs same way look:

could be your prob...