MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

Apperture problem with some lenses
查看上一个主题 :: 查看下一个主题  


Reply

Hello everybody,

It's been quite long time that I own some cheap lenses (pentacon or other no names) with the same problem with apperture :

-The ring move well.
-Diaphragm doesn't move at all when the apperture ring is moving (so it looks like the ring move freely, and has no effect at all on).


I know that you may think it's because of A/M .. but on most of my lens with the pin, I manage to solve it and make it always Manual mode (pin always pushed).

I already opened some of them, but I never notice some strange... there isn't any broken part. But maybe missing part? The diaphragm is not stucked, since I can close/open it with the little lever.

Here is an exemple, with a Pentacon 29mm/2.8 :



Anyone could tell me if he see something wrong with this lens (all of my other faulty lens looks the same)..

Even if they are quite cheap lenses, I find it too pity to not be able to test them with their full capabilities. That's why I definitly would like to find a way to fix that problem.

Thx in advance,

Reguards,


Reply

From here, I don't see anything wrong. What happens when you turn aperture ring with the back of the lens unmounted? i mean, what moves inside the lens?


Reply

Apperture ring move, but no effect on the diaphragme. I can make a little video if needed.


Reply

the little pin on the left part should go in the "hole" on the end of the half metal ring on the mount part. Then something should couple movement of the aperture ring with that half metal ring - more or less.

If you press the aperture pin, the mechanism inside affects in some ways the half ring?


Reply

引用:
the little pin on the left part should go in the "hole" on the end of the half metal ring on the mount part. Then something should couple movement of the aperture ring with that half metal ring - more or less.



That's what I though, I tested it, but it simply doesn't move, because it's not coupled with apperture ring. Also, when the pin is in this hole, apperture is closed 100% (I mean, not f22, but simply closed).

Here is a video I just made : http://www.youtube.com/watch?v=XbNIhZPNm2M&feature=youtu.be


Reply

It looks something was assembled wrong - but I can't tell it from here. Many lenses have similar mechanisms, but they all vary a little: I don't think something's missing, you will probably only have to find the correct position for the metal part that trasmits the pressure on the auto pin (and the aperture ring position)to the lever that actually controls aperture. Maybe one of the extruded part on that metal half ring must be fitted in one of the holes of the aperture ring, or something like that.


Reply

Oh.. in fact, problem was that the little pin (not on the extrem part, but middle part of the half metal thing) had to be coupled with the apperture ring... so simple that I feel quite stupid now Embarassed . It was a bit tricky to correctly reassemble it, but now, it's working (especialy with my 2 left hands)



Thx for your help Aanything Very Happy


Reply

You're welcome!