| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
Bogie
 注册时间: 2011年1月22日 文章: 173 来自: Houten, The Netherlands
|
 发表于: 周六 12月 29, 2012 5:30 pm 文章标题: Askania Rangefinder - adjusting |
|
 发表于: 周六 12月 29, 2012 5:30 pm 文章标题: Askania Rangefinder - adjusting |
|
|
Bogie wrote:
Since a couple of week I purchased an Askania Rangefinder.
Soon I found out that the calibration was off because the messured distances where wrong. But unlike other rangefinders the Askania has no adjustmentscrew at the outside. So I opened the rangefinder to look for an adjustmentscrew on the inside, but apart from a screw to aline the vertical adjustment there was nothing else to be found.
When I looked through the finder of the dismanteld rangefinder to a subject at infinity and slightly pushed the brass mirrorholder (which is moved by the adjustmentwheel) I realized that the calibration was perfect at that moment. I decided to put a thin piece of paper between the brass mirrorholder and the "blind screw" of the adjustmentwheel. The result was perfect!
After that I could just press the two halves of the rangefinder back together again.
 _________________ 35mm, 120mm & digital camera-user |
|
| 返回顶部 |
|
 |
Lloydy
 注册时间: 2009年9月2日 文章: 7880 来自: Ironbridge. UK.
Expire: 2022-01-01
|
 发表于: 周日 12月 30, 2012 8:32 pm 文章标题: |
|
 发表于: 周日 12月 30, 2012 8:32 pm 文章标题: |
|
|
Lloydy wrote:
I have a very similar Medis rangefinder and that is calibrated by a smll adjusting knob in the center of the main dial. I measure a distance, set the main dial to that, and then the tiny knob adjusts the rangefinder patch. The center knob is tight so it doesn't easily go out of adjustment.
Your picture looks as though there might be a similar arrangement on your Askania ? _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| 返回顶部 |
|
 |
Nesster
 注册时间: 2008年4月24日 文章: 5883 来自: NJ, USA
Expire: 2014-02-20
|
 发表于: 周一 12月 31, 2012 1:55 pm 文章标题: |
|
 发表于: 周一 12月 31, 2012 1:55 pm 文章标题: |
|
|
Nesster wrote:
These are typical instructions; however it is possible the Askania doesn't fit the mold. And at any rate sounds like you found a solution!
Photopia Rangefinder instructions by Nesster, on Flickr _________________ -Jussi
Camera photos
Print Photographica
|
|
| 返回顶部 |
|
 |
Bogie
 注册时间: 2011年1月22日 文章: 173 来自: Houten, The Netherlands
|
 发表于: 周一 12月 31, 2012 3:55 pm 文章标题: |
|
 发表于: 周一 12月 31, 2012 3:55 pm 文章标题: |
|
|
Bogie wrote:
The problem is that the round little "chrome" cover in the centre of the adjustmentwheel (which is probably hiding the adjustmentscrew) seems impossible to remove.
 _________________ 35mm, 120mm & digital camera-user |
|
| 返回顶部 |
|
 |
Lloydy
 注册时间: 2009年9月2日 文章: 7880 来自: Ironbridge. UK.
Expire: 2022-01-01
|
 发表于: 周一 12月 31, 2012 4:05 pm 文章标题: |
|
 发表于: 周一 12月 31, 2012 4:05 pm 文章标题: |
|
|
Lloydy wrote:
I think the center knob should turn - independently of the large adjuster - rather than be removed. I've just looked at a Watameter rangefinder and that is exactly the same. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| 返回顶部 |
|
 |
Bogie
 注册时间: 2011年1月22日 文章: 173 来自: Houten, The Netherlands
|
 发表于: 周一 12月 31, 2012 5:53 pm 文章标题: |
|
 发表于: 周一 12月 31, 2012 5:53 pm 文章标题: |
|
|
Bogie wrote:
| Lloydy 写道: |
| I think the center knob should turn - independently of the large adjuster - rather than be removed. I've just looked at a Watameter rangefinder and that is exactly the same. |
Sorry, it is impossible to turn nor seems it possible to remove. _________________ 35mm, 120mm & digital camera-user |
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|