| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
ForenSeil
 注册时间: 2011年4月15日 文章: 2731 来自: Kappeln, Schleswig-Holstein, Germany.
|
 发表于: 周五 1月 25, 2013 12:20 am 文章标题: "Errors" in film emulsion? |
|
 发表于: 周五 1月 25, 2013 12:20 am 文章标题: "Errors" in film emulsion? |
|
|
ForenSeil wrote:
Hi
I'm getting sometimes such "errors" on B/W films. It occurs maybe once in 1 of maybe 5 rolls.
They ruined a few nice shots over the time
That's TriX 400 pushed to ISO 3200 in Xtol 1+1 - but I've already seen it with other dev.-/film combinations.
Can anyone say how to avoid them? _________________ I'm not a collector, I'm a tester
My camera: Sony A7+Zeiss Sonnar 55/1.8
Current favourite lenses (I have many more):
A few macro-Tominons, Samyang 12/2.8, Noritsu 50.7/9.5, Rodagon 105/5.6 on bellows, Samyang 135/2, Celestron C8 2000mm F10
Most wanted: Samyang 24/1.4, Laowa 100/2.8 2x, Nikon 200/2 ED |
|
| 返回顶部 |
|
 |
berraneck
 注册时间: 2009年5月24日 文章: 972 来自: prague, czech republic
|
 发表于: 周五 1月 25, 2013 1:05 am 文章标题: |
|
 发表于: 周五 1月 25, 2013 1:05 am 文章标题: |
|
|
berraneck wrote:
just first idea, do you keep temperature of all liquids about the same? I´ve seen some emulsion errors when washing temperature was too hot or too cool, but never this size _________________ equipment doesn´t count, good photographs do |
|
| 返回顶部 |
|
 |
David
 注册时间: 2011年4月13日 文章: 1869 来自: Denver, Colorado
Expire: 2013-01-25
|
 发表于: 周五 1月 25, 2013 1:35 am 文章标题: |
|
 发表于: 周五 1月 25, 2013 1:35 am 文章标题: |
|
|
David wrote:
I had that happen when a piece of emulsion had torn in the film spiral's clip. The emulsion came off during developing and adhered to another part of the film. So, my question is whether that part of the emulsion (while in a plastic sheet) has a different relief? _________________ http://www.youtube.com/user/hancockDavidM |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周五 1月 25, 2013 1:42 am 文章标题: |
|
 发表于: 周五 1月 25, 2013 1:42 am 文章标题: |
|
|
Attila wrote:
I never had similar experience. |
|
| 返回顶部 |
|
 |
themoleman342
 注册时间: 2007年10月21日 文章: 2190 来自: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 发表于: 周五 1月 25, 2013 2:58 am 文章标题: |
|
 发表于: 周五 1月 25, 2013 2:58 am 文章标题: |
|
|
themoleman342 wrote:
I can't say I've experienced anything like this before either. It does look as if a big piece of something adhered to the film. Xtol, I have noticed, has a tendency to separate and get little white flakes that settle to the bottom of the container. I wonder if one of these flakes stuck to the film somehow?
The image is not entirely lost. After about 2 minutes of cloning I ended up with this:
Obviously it's still very visible but if you spend some actual time, most things are salvageable. |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周五 1月 25, 2013 3:25 am 文章标题: |
|
 发表于: 周五 1月 25, 2013 3:25 am 文章标题: |
|
|
iangreenhalgh1 wrote:
| Attila 写道: |
| I never had similar experience. |
Me neither. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
Excalibur
 注册时间: 2009年7月19日 文章: 5018 来自: UK
Expire: 2014-04-21
|
 发表于: 周五 1月 25, 2013 8:57 am 文章标题: |
|
 发表于: 周五 1月 25, 2013 8:57 am 文章标题: |
|
|
Excalibur wrote:
Well I've had that problem a few times with colour negs done by the supermarket, but a much smaller irregular white patch and always assumed it was something floating around the developer\fixer that stuck to the neg. It has never bothered me as I just remove it with photoshop. _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| 返回顶部 |
|
 |
spoilerhead
 注册时间: 2012年1月25日 文章: 68 来自: ITaly
|
 发表于: 周五 1月 25, 2013 3:05 pm 文章标题: |
|
 发表于: 周五 1月 25, 2013 3:05 pm 文章标题: |
|
|
spoilerhead wrote:
had that once when two windings of the film touched on the development reel. _________________ Eos (A/D) + M42 |
|
| 返回顶部 |
|
 |
themoleman342
 注册时间: 2007年10月21日 文章: 2190 来自: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 发表于: 周五 1月 25, 2013 3:27 pm 文章标题: |
|
 发表于: 周五 1月 25, 2013 3:27 pm 文章标题: |
|
|
themoleman342 wrote:
| 引用: |
| had that once when two windings of the film touched on the development reel. |
Wouldn't that stop the developer from reaching the film, resulting in a dark spot? |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周五 1月 25, 2013 4:57 pm 文章标题: |
|
 发表于: 周五 1月 25, 2013 4:57 pm 文章标题: |
|
|
iangreenhalgh1 wrote:
| themoleman342 写道: |
| 引用: |
| had that once when two windings of the film touched on the development reel. |
Wouldn't that stop the developer from reaching the film, resulting in a dark spot? |
Yes, that is what happens. The emulsion remains on the neg and is opaque so comes out as a black area when scanned. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
ForenSeil
 注册时间: 2011年4月15日 文章: 2731 来自: Kappeln, Schleswig-Holstein, Germany.
|
 发表于: 周五 1月 25, 2013 6:52 pm 文章标题: |
|
 发表于: 周五 1月 25, 2013 6:52 pm 文章标题: |
|
|
ForenSeil wrote:
| berraneck 写道: |
| just first idea, do you keep temperature of all liquids about the same? I´ve seen some emulsion errors when washing temperature was too hot or too cool, but never this size |
This might be the problem
I doing the final wash a bit warmer for faster drying.
Thx! _________________ I'm not a collector, I'm a tester
My camera: Sony A7+Zeiss Sonnar 55/1.8
Current favourite lenses (I have many more):
A few macro-Tominons, Samyang 12/2.8, Noritsu 50.7/9.5, Rodagon 105/5.6 on bellows, Samyang 135/2, Celestron C8 2000mm F10
Most wanted: Samyang 24/1.4, Laowa 100/2.8 2x, Nikon 200/2 ED |
|
| 返回顶部 |
|
 |
spoilerhead
 注册时间: 2012年1月25日 文章: 68 来自: ITaly
|
 发表于: 周六 1月 26, 2013 10:00 am 文章标题: |
|
 发表于: 周六 1月 26, 2013 10:00 am 文章标题: |
|
|
spoilerhead wrote:
| iangreenhalgh1 写道: |
| themoleman342 写道: |
| 引用: |
| had that once when two windings of the film touched on the development reel. |
Wouldn't that stop the developer from reaching the film, resulting in a dark spot? |
Yes, that is what happens. The emulsion remains on the neg and is opaque so comes out as a black area when scanned. |
um...
It forms a dark spot on the negative, what equals to a white spot on the positive. _________________ Eos (A/D) + M42 |
|
| 返回顶部 |
|
 |
themoleman342
 注册时间: 2007年10月21日 文章: 2190 来自: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 发表于: 周六 1月 26, 2013 1:51 pm 文章标题: |
|
 发表于: 周六 1月 26, 2013 1:51 pm 文章标题: |
|
|
themoleman342 wrote:
| 引用: |
| It forms a dark spot on the negative, what equals to a white spot on the positive. |
I don't understand how that occurs than. Why would the film touching result in over-development in that spot? It should be the complete opposite. |
|
| 返回顶部 |
|
 |
spoilerhead
 注册时间: 2012年1月25日 文章: 68 来自: ITaly
|
 发表于: 周六 1月 26, 2013 2:30 pm 文章标题: |
|
 发表于: 周六 1月 26, 2013 2:30 pm 文章标题: |
|
|
spoilerhead wrote:
| themoleman342 写道: |
| 引用: |
| It forms a dark spot on the negative, what equals to a white spot on the positive. |
I don't understand how that occurs than. Why would the film touching result in over-development in that spot? It should be the complete opposite. |
I'ts not overdevelopment at all
If two windings touch nothing reaches the emulsion, including the fixer, so the actual emulsion stays on the film (the spot looks like undeveloped film). I've never seen it the other way around (touching while in developer and not touching while in fixer).
According to my experience this usually happens when a reel jams, and you use to much force to fix it. _________________ Eos (A/D) + M42 |
|
| 返回顶部 |
|
 |
themoleman342
 注册时间: 2007年10月21日 文章: 2190 来自: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 发表于: 周六 1月 26, 2013 3:02 pm 文章标题: |
|
 发表于: 周六 1月 26, 2013 3:02 pm 文章标题: |
|
|
themoleman342 wrote:
Oh, I understand! Thanks for the clarification. |
|
| 返回顶部 |
|
 |
jimithing616
 注册时间: 2013年3月27日 文章: 63 来自: Minneapolis, MN
|
 发表于: 周六 4月 20, 2013 7:23 am 文章标题: |
|
 发表于: 周六 4月 20, 2013 7:23 am 文章标题: |
|
|
jimithing616 wrote:
This, to me, looks like you are either rolling your film on the reel wrong and it is touching in those spots causing the stop, fix, whatever to stick and burn in like that... or your not washing well enough and the same is happening... also are you using powder developer? if so make sure there are no lumps in it... lumps could cause this. _________________ My Best Lenses (off the top of my head):
Konica UC 28mm 1.8 AR
Konica UC 80-200mm 4 AR x2
Konica 55mm 3.5 Macro w/Converter.
Minolta MD 24mm 2.8
Minolta MC 58mm 1.4
Minolta MD & MC 50 1.4
Vivitar 35mm 1.9 (minolta MD)
Canon FD 50mm 1.4 S.S.C. & FDn
Canon FD 24mm 2.8 S.S.C. & FDn
Canon FD 200mm 4 S.S.C
Canon FD 135 3.5 S.C. & FDn
Tamron Adaptall 2 24mm 2.5
Nikon AI-S 55mm 2.8 Macro
SMC Pentax-m 50mm 1.4
SMC Pentax-m 135 3.5
Spiratone Plura-Coat 28mm f/2 |
|
| 返回顶部 |
|
 |
jimithing616
 注册时间: 2013年3月27日 文章: 63 来自: Minneapolis, MN
|
 发表于: 周六 4月 20, 2013 7:25 am 文章标题: |
|
 发表于: 周六 4月 20, 2013 7:25 am 文章标题: |
|
|
jimithing616 wrote:
In fact it kinda looks like there was absolutely NO emulsion there doesn't it... like it somehow was scratched away. _________________ My Best Lenses (off the top of my head):
Konica UC 28mm 1.8 AR
Konica UC 80-200mm 4 AR x2
Konica 55mm 3.5 Macro w/Converter.
Minolta MD 24mm 2.8
Minolta MC 58mm 1.4
Minolta MD & MC 50 1.4
Vivitar 35mm 1.9 (minolta MD)
Canon FD 50mm 1.4 S.S.C. & FDn
Canon FD 24mm 2.8 S.S.C. & FDn
Canon FD 200mm 4 S.S.C
Canon FD 135 3.5 S.C. & FDn
Tamron Adaptall 2 24mm 2.5
Nikon AI-S 55mm 2.8 Macro
SMC Pentax-m 50mm 1.4
SMC Pentax-m 135 3.5
Spiratone Plura-Coat 28mm f/2 |
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|