| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
Fotal
 注册时间: 2008年3月2日 文章: 282 来自: Sweden
Expire: 2013-08-21
|
 发表于: 周二 3月 18, 2008 7:45 pm 文章标题: Oily blades |
|
 发表于: 周二 3月 18, 2008 7:45 pm 文章标题: Oily blades |
|
|
Fotal wrote:
Someone made a comment (sorry, don't remember who) that oily blades can be bad in cold weather as they might break.
Are there any other reasons that I should consider a cleaning of the Jupiter-9 I just picked up? _________________ Mr Scott please restrain your leaps of illogic. I have said nothing. I was merely speculating. |
|
| 返回顶部 |
|
 |
themoleman342
 注册时间: 2007年10月21日 文章: 2190 来自: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 发表于: 周二 3月 18, 2008 9:42 pm 文章标题: |
|
 发表于: 周二 3月 18, 2008 9:42 pm 文章标题: |
|
|
themoleman342 wrote:
Usually it's not an issue with preset lenses like the jupiter 9. In auto lenses the blades have to move quickly so if they are 'gummy' then they simply may not close. In cold weather the oil will thicken, so you have to be careful of that...as long as you turn the aperture slowly there shouldn't be any hang-up. If there is, never ever ever force it.
Besides that fact, the jupiter 9 is, or so I've heard, incredibly difficult to reassemble correctly. Many of the lemons on the market are due to people taking them apart and not being able to get them quite right again. This is not to say anything about your ability in the matter...just making you aware of the fact. Attila, I know, is of the camp that you NEVER disassemble a lens that doesn't absolutely need it.
Hope that helps in some regard.
~Marc
最后由 themoleman342 于 周五 3月 21, 2008 2:40 am 编辑;共编辑 1 次 |
|
| 返回顶部 |
|
 |
Fotal
 注册时间: 2008年3月2日 文章: 282 来自: Sweden
Expire: 2013-08-21
|
 发表于: 周三 3月 19, 2008 3:58 am 文章标题: |
|
 发表于: 周三 3月 19, 2008 3:58 am 文章标题: |
|
|
Fotal wrote:
Thanks Marc!
I can imagine that some lenses needs very special care when put together again after a dismantling. I'm thinking that there must be some factory service instructions for all the serivice shops?
Anyway, I'll leave it for now. The J-9 is otherwise in a very good shape but I have no adapter for it yet to try it out on the camera. _________________ Mr Scott please restrain your leaps of illogic. I have said nothing. I was merely speculating. |
|
| 返回顶部 |
|
 |
LucisPictor
 注册时间: 2007年2月26日 文章: 17633 来自: Oberhessen, Germany / Maidstone ('95-'96)
Expire: 2013-12-03
|
|
| 返回顶部 |
|
 |
Fotal
 注册时间: 2008年3月2日 文章: 282 来自: Sweden
Expire: 2013-08-21
|
|
| 返回顶部 |
|
 |
rick_oleson
 注册时间: 2007年2月26日 文章: 386 来自: Lexington Kentucky USA
|
 发表于: 周三 3月 19, 2008 11:30 am 文章标题: |
|
 发表于: 周三 3月 19, 2008 11:30 am 文章标题: |
|
|
rick_oleson wrote:
The Jupiter-9's reputation for being difficult to reassemble, I think, comes mainly from the focus helical system of the Leica rangefinder version of the lens. In that one, if you separate the focus helical and the rangefinder cam, your chances of getting it back together right are almost zero. Getting to the diaphragm, though, is not so hard, and the focus system isn't as bad in other versions of the lens... though the focus helical of any SLR lens tends to have a sort of "Catch-22" feel to it during reassembly.
Oil on the blades of an auto-diaphragm lens is a disabling problem, but on a preset or rangefinder lens you don't need to worry until the ring begins to feel stiff. When you get to that point, don't force it because you can damage the blades. _________________ I don't know what I want to be when I grow up |
|
| 返回顶部 |
|
 |
Flor27
 注册时间: 2007年9月13日 文章: 1195 来自: Paris, France
|
 发表于: 周四 3月 20, 2008 2:25 pm 文章标题: Re: Oily blades |
|
 发表于: 周四 3月 20, 2008 2:25 pm 文章标题: Re: Oily blades |
|
|
Flor27 wrote:
| Fotal 写道: |
Someone made a comment (sorry, don't remember who) that oily blades can be bad in cold weather as they might break.
Are there any other reasons that I should consider a cleaning of the Jupiter-9 I just picked up? |
That could be me, as I've broken some J-9 aperture blades while trying my freshly unpackaged and cold lens
A russian eBay seller sold me - on my request ! - a complete blades set, and now I have to figure out how can I fit them inside the J9...
 _________________ Switching from M42 to Minolta MD & Contax/Yashica |
|
| 返回顶部 |
|
 |
rick_oleson
 注册时间: 2007年2月26日 文章: 386 来自: Lexington Kentucky USA
|
 发表于: 周四 3月 20, 2008 4:05 pm 文章标题: |
|
 发表于: 周四 3月 20, 2008 4:05 pm 文章标题: |
|
|
rick_oleson wrote:
OUCH! how hard did you push on the aperture ring? _________________ I don't know what I want to be when I grow up |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周四 3月 20, 2008 4:17 pm 文章标题: |
|
 发表于: 周四 3月 20, 2008 4:17 pm 文章标题: |
|
|
Attila wrote:
In similar cases I can't fixed my Steinheil Culminar 85mm f2.8 even if I spent hours with that,if any blade damaged minimally it not works any more. |
|
| 返回顶部 |
|
 |
Flor27
 注册时间: 2007年9月13日 文章: 1195 来自: Paris, France
|
 发表于: 周四 3月 20, 2008 6:03 pm 文章标题: |
|
 发表于: 周四 3月 20, 2008 6:03 pm 文章标题: |
|
|
Flor27 wrote:
| rick_oleson 写道: |
| OUCH! how hard did you push on the aperture ring? |
Not hard at all ! In fact, aperture ring was OK to turn but as the blades were sticky each other and are so thin and fragile, ... _________________ Switching from M42 to Minolta MD & Contax/Yashica |
|
| 返回顶部 |
|
 |
hacksawbob
 注册时间: 2007年2月28日 文章: 1293 来自: LANCS UK
|
 发表于: 周四 3月 20, 2008 7:14 pm 文章标题: |
|
 发表于: 周四 3月 20, 2008 7:14 pm 文章标题: |
|
|
hacksawbob wrote:
you ca get to the rear of the aperture quite easily the front assembly screws out from the rear. you could treat this with lighter fluid and q tip, then reassemble use for a few more months then repeat each time reducing the amount of oil on the blades. as you use the lens the oil will transfer from front to back and gradualy you will reduce the ammount of oil on the blades. Here is my most recent J9 acquisition an single coated 74 version,
点击此处在 eBay 上查看 _________________ LENS LIST |
|
| 返回顶部 |
|
 |
Flor27
 注册时间: 2007年9月13日 文章: 1195 来自: Paris, France
|
 发表于: 周四 3月 20, 2008 9:48 pm 文章标题: |
|
 发表于: 周四 3月 20, 2008 9:48 pm 文章标题: |
|
|
Flor27 wrote:
Actually my problem is to put the blades back in the lens. I guess I have to dismantle it more than what I've done to extract the broken set... _________________ Switching from M42 to Minolta MD & Contax/Yashica |
|
| 返回顶部 |
|
 |
rick_oleson
 注册时间: 2007年2月26日 文章: 386 来自: Lexington Kentucky USA
|
 发表于: 周四 3月 20, 2008 11:32 pm 文章标题: |
|
 发表于: 周四 3月 20, 2008 11:32 pm 文章标题: |
|
|
rick_oleson wrote:
I wonder if they were already damaged before you got it... I've never seen them that fragile, it takes some force to shear the pins off the ends. _________________ I don't know what I want to be when I grow up |
|
| 返回顶部 |
|
 |
Fotal
 注册时间: 2008年3月2日 文章: 282 来自: Sweden
Expire: 2013-08-21
|
 发表于: 周五 3月 21, 2008 12:14 am 文章标题: |
|
 发表于: 周五 3月 21, 2008 12:14 am 文章标题: |
|
|
Fotal wrote:
Flor, that looks nasty.
Good luck with the reassembly project! _________________ Mr Scott please restrain your leaps of illogic. I have said nothing. I was merely speculating. |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周五 3月 21, 2008 12:22 am 文章标题: |
|
 发表于: 周五 3月 21, 2008 12:22 am 文章标题: |
|
|
Attila wrote:
You can't make this damages on a good working lens even if it was cold! I have and have many pre-set lens. They are not too sensitive pieces.In my opinion this lens was cleaned and wrongly rebuild. You did turn aperture ring on an already damaged lens!! |
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|