MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

Is it possible replace a Pentacon Six mount?
查看上一个主题 :: 查看下一个主题  


Reply

Hallo,
I found a P6 mount lens... without the mount! I can replace it?
I would like to turn it into M42 lens.
Or I would like (as a second hypothesis) to restore the original mount.
Do you have any advise?

Thank you
Luca


Reply

what lens is that? I ask because there are some (such as the preset version of pentacon 2.8/135) that have an interchangeable mount that can be switched between p6 and m42: If your lens is one of these, you "just" need to find the right part.
Otherwise, fitting an m42 mount on a lens intended for P6 camera is surely doable, "how" depends on the lens.


Reply

Iirc you can swap the zebra versions of Pentacon 135mm and 200mm lenses to either M42 or Exa using the interchangeable mount. I doubt that there is a P6 adapter. Even if there is one you would end up with heavy vignetted or even circular images because the two lenses in question are made for 36x24mm film. P6 uses medium format film.

@ ellepi: you might try to screw a tube in the length of the missing part to the lens body (there should be three threads) and attach an adapter to it (like a P6->Eos). Keep in mind that you need the correct register distance between sensor/film and lens to achieve infinity focus.