MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

That old Linhof...
查看上一个主题 :: 查看下一个主题  


Reply

I bought it a few years ago, as a 9x12 Technika. True enough, the seller didn't really know all that much about it, and simply described it as a 9x12 Technica. I was quite happy with it, as it was dead cheap for a Linhof and 9x12 film is still available, so not a problem really.
A bit of online research pointed to it being a Technika II, designed in 1936, so I've just assumed that's what it is.
Over the past couple of years, some more information has appeared on the web, from various other people who've had one of these and this got me wondering. Keen to find out exactly what it is, I fired off an email to Linhof, quoting serial number and attached a few pics.
It seems to have stumped them - but initially they've told me that serial number would put it in the mid-50s, thus making it a Technika III.
From other sources, it looks to me that post-war (1946) Linhof more or less carried on with the Tech II but ugraded it, and fitted a rotating back (which mine has) and called it the Technika III. There were five variations of the Tech III during its model run; I think mine is likely the basic one. When selling outside of Europe, the normal film size offered to the public was for the Graflex 4x5 film holder. Mine has what would appear to be the optional 9x12 holder, for single-sided Linhof film carriers, and because it was sold to an Austrian Ministry they probably standardised on the LF film of that size they were already using - 9x12, which was much more common in Germany and Austria than 4x5 at that time.

It looks like I could fit the 4x5 rotating back - some of which crop up on ebay from time to time and don't really cost all that much.

I await Linhof's further information on this.


Reply

Fascinating.... but where are the pics of the Linhof? Wink We need to see!


Reply

As requested...
These are the original seller's pics and the one showing the rotating back is mine.










You'll notice it has an S-K 15cm fitted, which is at odds with the focus scale. There's a 135mm Graflex lens here for this.











Reply

Whip-Whoo (wolf whistle) that is some nice old camera.
Per this site http://www.ground-glass.net/large-format/schneider-lenses-age the lens is from 1929 or thereabouts... I'm thinking maybe the carcass is old-ish and whoever owned it kept getting upgrades for it over time. Thrifty and smart.


Reply

1929 isn't so far off from my first inkling of the date, too. Perhaps a favourite lens of someone's. It's much better in fact than the pics make it look - they make it appear quite scabby. The bellows have been replaced some time in the last couple of decades, so it's been kept in use. The rotating back was quite siezed though, and took a fair bit of persuasion to get it moving.
It was owned by the Austrian Federal Monuments Office, but the sticker on it said "Bundesdenkmalamt" which dates the sticker post-war, at least.
I suppose it was used as a record camera, possibly in GG mode, so the focus scale would be redundant.
Otoh, who knows? Maybe the seller just stuck any old lens on it. Smile


Reply

Oh, nice!!


Reply

A little more information has slowly trickled its way onto the 'net - a lot of this info wasn't around when I last looked, or wasn't being indexed by searches.
It appears to be a Standard or Press variant of the Tech III, which were very stripped of front movements and only had rise/fall. This also means the front standard is quite robust (not that Linhof normal ones are flimsy, as far as I know) and probably quite capable of putting up with the hustle and bustle of a photo-opportunity, with some bumping and banging - apart from that, the average press camera has no need of studio or field movements. The Press has no back movements, but does have a rotating back (I was wrong about the Tech II, it has one of those also).
The only drawback I can see to going 4x5 with it, is that I wouldn't have a roll-film back for it, as Linhof's 4x5 back isn't as bulky as the Graphex and only takes roll-film holders either designed for it, or the Calumet type that slot in, and that means more expense.

I might just leave it as it is and can use 9x12 or roll-film and for 4x5 I've got the Crown.
It's significantly lighter than the Crown though, and that counts for something.


Reply

Well, this morning saw the arrival of a used rotating back, from a Tech IV (several people have upgraded from the Tech III back to the later backs).
Only one slight teeny little problemette with it; it doesn't bloody fit.
It's a good couple of millimetres wider both in the body size and the rotating ring diameter, there's no way it would fit.
Which means, while Linhof might have the serial number listed as belonging to a Tech III, this is a Tech III in name only. As I suspected all along, and from the appearance of it, it's nothing more or less than a pre-war Tech II which they had punted out as the cheaper option for the likes of budget-conscious government departments (as this came from).
I had entertained the notion of improving this one, but that firmly slams the door on that idea.
Still, the back is a really nice, well-made, precision-engineered item and it sitting there calls to me - "You must buy a camera to fit this to."
I'd thought of buying a proper Tech III or IV for a while, anyway. This just pushes me further in that direction.
An autumn and winter of saving, beckons.