MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

big-is adapters, ebay
查看上一个主题 :: 查看下一个主题  


Reply

Just wanted to give these guys credit where credit's due.

About a year ago I bought a few adapters from them and though they did their job ok they weren't a tight fit between adapter and lens. (Nikon to Canon adapter)
I contacted them to explain my frustration with this, in great detail, and said I'd keep looking for a better fitting adapter.
They replied that they were constantly looking to improve their adapters (blah, blah) and manufacturing to finer tolerances.

Today I received a new Nikon to Canon adapter, which was a surprise because I didn't order one. There was a small note inside saying their new adapters would 'bring me happiness'.
They're right, I'm full of happiness Razz , the adapter is a very tight fit and has the same amount of movement/slack as a genuine Canon lens (nil).

Now, I'm not saying my 'complaint' to them was the reason for this better fitting adapter being created, but it's nice to see they are doing what they said they would do, ie make a better product. Clearly something about my message to them stuck in someone's mind so they sent me a new adapter, very nice of them. I have sent a thank you message and have praised their work.

One small issue, the adapter is so good a fit that I can't get it off again Laughing but I'm certainly not complaining this time!


Reply

Strange, I've got a dozen Big I's adapters for NEX bought over the last two years, none has any play or slackness, because of the quality I stuck to buying my adapters from them.

Good to know they have such good customer service. Smile


Reply

iangreenhalgh1 写道:
Strange, I've got a dozen Big I's adapters for NEX bought over the last two years, none has any play or slackness, because of the quality I stuck to buying my adapters from them.

Good to know they have such good customer service. Smile

Maybe they nailed the NEX adapter first time of trying.
I've had a lot of adapters with a little bit of 'give' in them, mostly annoying on macro lenses, this new one is how they all should be.

Yeah, great customer service, not always the case on ebay. Rolling Eyes Laughing


Reply

I've always been happy enough with my Big-is adaptors and can't say there was much play, if any, on them. Same with jinfinance ones.
I suppose you were unlucky enough to get some sloppy ones and perhaps they were aware the QC at that time wasn't up to snuff.


Reply

I have one of the old Jinfinance Nikon-EOS adapters. It became looser the more I used it. Then either Big_IS or Jinfinance posted here I think how to re-tighten the adapter easily by using a knife blade to spread apart a "spring" made by splitting the "fins", making them thicker to hold tighter. There are photos. Sorry I can't find it now. I was very happy with the old adapter! (But have sold all my Nikkors Laughing)


Reply

my big-is c/y-nex adapter has some play, and need to open up to adjust the metal flags. Worst is it does not lock properly. i got partly refund.

my other big-is adapters, emf-ef adapters fit tight. and yes, so tight that they won't be able to get it off, and they feel ok.


Reply

I use almost only big_is adapters, the only one I ever have trouble with is Minolta fitting, the tab will not always go in the slot on the lens flange. One of my STR100's does it too so I think its a design problem on the actual flange slot, rather than a bad product.


Reply

Only adapter I've had break on me was my first Konica-NEX one, the little spring metal bit to lock it broke, but I can't complain, it got a lot of use before it broke,second one is going strong. I'd rather buy a cheap one thatlast a couple of years than an expensive one as I am the king of breaking or losing things. Prime example being ND filters, I must have bought a dozen because they keep disappearing.


Reply

Big_is indeed sells adapters of high quality and fit, I am very satisfied with my M42-EOS adapter and am currently awaiting the arrival of a C-mount and M42 adapter for my NEX.


However, I must saw that I was disappointed by the exakta-Eos adapter that I recently bought for my Topcor lenses.

The hook that it uses to lock the lens is just not very functional, since it is not retained with a spring and there is play within the hook and the pin that it hooks onto.


I already expressed my desire for a good Topcor-EOS adapter in other thread (and sorry for hijacking the thread), but still if anyone has a good adapter that has minimal play, I would be happy to be informed about it.

I know there is good Topcor-EOS adapter from Rainbow imaging, but that one is not available at present. Any other thought on acquiring one are welcome.


Reply

iangreenhalgh1 写道:
Only adapter I've had break on me was my first Konica-NEX one, the little spring metal bit to lock it broke, but I can't complain, it got a lot of use before it broke,second one is going strong. I'd rather buy a cheap one thatlast a couple of years than an expensive one as I am the king of breaking or losing things. Prime example being ND filters, I must have bought a dozen because they keep disappearing.


I have the same problem with their earlier version of the MD-NEX adapter. The metal mounting part and the plastic body seperated and fell off. But they made a newer version now which is much better and durable I have no problems at all with this newer one.

I also have some problem with the earlier M42-NEX adapter by Big-IS, in which the flange doesn't work that well on some of my M42 lenses with pins but no A/M switch. For example, those Fujinons and Mamiya Sekors with M42 mount and no A/M switch have to rely on the flange for aperture control. But after putting one of those lenses on the adapter the aperture ring got stuck because the pin is not fully pressed down the flange is not designed accurately to do that. But the newer version is much better I tried it on one Mamiya Sekor and the aperture ring moves so smoothly. Now I have no reason not to buy from them because I am certain their adapters work very well. Buying from another brand involves risks unless you are buying one you haven't tried then that's another story. So great job by them really If Big-is is reading keep up the good work!


Reply

bruzzo 写道:
iangreenhalgh1 写道:
Only adapter I've had break on me was my first Konica-NEX one, the little spring metal bit to lock it broke, but I can't complain, it got a lot of use before it broke,second one is going strong. I'd rather buy a cheap one thatlast a couple of years than an expensive one as I am the king of breaking or losing things. Prime example being ND filters, I must have bought a dozen because they keep disappearing.


I have the same problem with their earlier version of the MD-NEX adapter. The metal mounting part and the plastic body seperated and fell off. But they made a newer version now which is much better and durable I have no problems at all with this newer one.

I also have some problem with the earlier M42-NEX adapter by Big-IS, in which the flange doesn't work that well on some of my M42 lenses with pins but no A/M switch. For example, those Fujinons and Mamiya Sekors with M42 mount and no A/M switch have to rely on the flange for aperture control. But after putting one of those lenses on the adapter the aperture ring got stuck because the pin is not fully pressed down the flange is not designed accurately to do that. But the newer version is much better I tried it on one Mamiya Sekor and the aperture ring moves so smoothly. Now I have no reason not to buy from them because I am certain their adapters work very well. Buying from another brand involves risks unless you are buying one you haven't tried then that's another story. So great job by them really If Big-is is reading keep up the good work!

I check my MD-NEX adapter order year ago and found it has light leak near the locking pin! May be I should buy a new one later as I do want my lens fall off from the adapter.

Most NEX cheap adapter seem works well except for those lens with stationary rear elements. There us a lot of rooms to design the adapter when compare to the EF mount.


Reply

I received a bag full of Big_is EOS adapters yesterday. Finish quality seems fine and only minor quibbles operation-wise.

The Contax-Yashica adapter is a very tight and won't reach the locking point. Compressing the lugs where they've been split should cure this.

The Exakta adapter will need some mods to work with Topcor and Mamiya Prismat lenses. It may be as simple as reducing the diameter of the flange at the outside edge. The bayonet latch has no spring but once mounted to the EOS body, I think it will remain in place and keep the lens secure in the adapter.

Pentax K... Aperture actuating lever interferes with EOS internals. Lenses must be modified.

M-42 adapters with pin flange. Some lenses won't seat. A matter of machining out the flange and using A-M switch. Adapter requires machining of the outside edge to allow use of EBC Fujinons. Probably same for Mamiya SX and Olympus FTL.

Nikon AI and Olympus OM adapters seem to work fine with some exceptions for aftermarket lenses.

Haven't tried the Leica R or T2 adapters yet.

Hoping to get some pictures posted soon!


Reply

Thanks for all that information.


Reply

casualcollector 写道:

... Olympus OM adapters seem to work fine with some exceptions for aftermarket lenses.!


My OM adapter unlocked sending my lens crashing to the ground. I put that to the fact that OM lenses have the catch on the lens body. Mounted on a camera it is close to the camera body but on an adapter its an inch in front of the camera and easy to grab when you are focusing. My only criticism.


Reply

casualcollector 写道:
I received a bag full of Big_is EOS adapters / / Haven't tried the Leica R or T2 adapters yet.


The Leica R adapter seems fine. The T2 adapter (and the only one I bought with a focus confirmation chip) was manufactured incorrectly. The thread pitch or thread depth is incorrect and it only spins on two or three revolutions then the threads bind. I have informed them and am waiting their reply.


Reply

I received a partial refund from big_is for a PB-EOS adapter which doesn't reach infinity. Partial refund = product - shipping costs.

Renato


Reply

casualcollector 写道:
casualcollector 写道:
I received a bag full of Big_is EOS adapters / / Haven't tried the Leica R or T2 adapters yet.


The Leica R adapter seems fine. The T2 adapter (and the only one I bought with a focus confirmation chip) was manufactured incorrectly. The thread pitch or thread depth is incorrect and it only spins on two or three revolutions then the threads bind. I have informed them and am waiting their reply.


I have one of these with no problems, probably a one-off.


Reply

I have a few of their adapters, mainly one-piece EOS adapters, and their quality seems quite good.


Reply

I think adapter is thin, try it with different lenses if you can , can happen easily okay with one lens no infinity with other.


Reply

I've had an email conversation with Big_Is regarding the T2 adapter and a refund is in the works.

I tried the adapter on 5 lenses and a telescope adapter tube and the adapter would turn down 2.2 to 2.7 revolutions before the threads would bind. I could not get the adapter seated on any.

Interestingly, several of my other adapters were a little cranky about seating on some lenses. One lens, the ubiquitous, old 500mm f8 mirror lens most commonly seen with the Lentar brand gave trouble with several adapters!

Even more interesting, the Big_Is M-42 adapter would spin right down and seat on most of the T threaded lenses!

Big_Is has introduced a new Minolta MD to EOS adapter with a seperate and very thin flange. Minolta has a 43.5mm flange to film register vs the EOS 44mm figure. While lenses will not focus to infinity the adapter should give a useful focus range especially with lenses longer than 50mm.

I measured an M-42 to EOS adapter and a Canon FL/FD flange from a teleconverter in consideration of marrying the two. At best, the FD mount face would be about 46mm from the sensor plane vs the 42mm FD register. That means maximum distance of about three feet or less at infinity focus with a 50mm lens. Sad