MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

Hole dimension for 1/4" thread?
查看上一个主题 :: 查看下一个主题  


Reply

Anybody knows the hole (drill dimension, pls. in mm) I need when I want to tap a 1/4" VNC (tripod socket) thread into it?


Reply

5.1mm to be exact, but 5mm is fine.

The thread is 1/4 Whitworth or 1/4 UNC ( not VNC ) The difference between Whitworth and UNC is so small that it makes no difference, but UNC taps are probably easier to get.


Reply

I'm pretty sure my Zeus book says 5.2mm for 1/4 UNC. But I'm about 900 miles away from it at the moment so I can't check. I don't have Whitworth taps, so I've always used 1/4 UNC without problems. As Lloydy says, there is almost no difference in the thread.


Reply

You have access to HIM, the great god of lenses - ZEUSS himself??? Laughing


Reply

5.1 for Whit' and 5.2 for UNC. Or 5mm will do. Wink