| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
cyrano
 注册时间: 2013年2月15日 文章: 871 来自: UK
Expire: 2016-12-30
|
 发表于: 周三 3月 26, 2014 6:39 pm 文章标题: Helios 44M-4 issue. |
|
 发表于: 周三 3月 26, 2014 6:39 pm 文章标题: Helios 44M-4 issue. |
|
|
cyrano wrote:
I've got a VGC lens , as new really however the focus ring is totally loose. I can turn it freely but it makes no contact with the helicoid (?) and the lens barrel doesn't extend at all. Is this a simple fix and if so, is anyone aware of a means to repair it? I don't wish to start taking it to pieces and don't have the tools anyway. I can't see any grub screws externally so am unsure of my next move aside from asking here.
Serial # is :85173618
 _________________ A whole bunch of stuff. |
|
| 返回顶部 |
|
 |
Lloydy
 注册时间: 2009年9月2日 文章: 7880 来自: Ironbridge. UK.
Expire: 2022-01-01
|
 发表于: 周三 3月 26, 2014 9:48 pm 文章标题: |
|
 发表于: 周三 3月 26, 2014 9:48 pm 文章标题: |
|
|
Lloydy wrote:
I suspect the three grub screws around the focusing barrel - between the distance numbers - are loose. Gently tighten them, turn the barrel clockwise looking at the front of the lens, till it hits the stop which is infinity. Then loosen the screws and set the barrel so the infinity mark lines up and re tighten the screws. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| 返回顶部 |
|
 |
cyrano
 注册时间: 2013年2月15日 文章: 871 来自: UK
Expire: 2016-12-30
|
 发表于: 周四 3月 27, 2014 8:39 am 文章标题: |
|
 发表于: 周四 3月 27, 2014 8:39 am 文章标题: |
|
|
cyrano wrote:
I'm afraid not Lloydy, there's no visible grub screws anywhere. I had suspected something like this as the focusing was starting to slip a little bit before eventually going completely slack but it would appear to be an internal fix which I'm a tad reluctant to try as the lens is immaculate otherwise. _________________ A whole bunch of stuff. |
|
| 返回顶部 |
|
 |
RSalles
 注册时间: 2012年8月12日 文章: 1372 来自: Brazil - RS / South
|
 发表于: 周四 3月 27, 2014 2:24 pm 文章标题: |
|
 发表于: 周四 3月 27, 2014 2:24 pm 文章标题: |
|
|
RSalles wrote:
| Lloydy 写道: |
| I suspect the three grub screws around the focusing barrel - between the distance numbers - are loose. Gently tighten them, turn the barrel clockwise looking at the front of the lens, till it hits the stop which is infinity. Then loosen the screws and set the barrel so the infinity mark lines up and re tighten the screws. |
X2!
The 3 screws are the small size made I can imagine, it can even be covered by dust, etc, so please look again. Otherwise, post a pic of the lens itself.
Usually, if the helicoid thread becomes seriously loose the movement will stick in place and it's a hell sometimes to get them apart: one part of the helicoid will pass over it's counterpart blocking the movement. If both parts of the helicoid disengaged from each other, if I'm not wrong, the lens will separate in two parts, not just become loose.
Cheers,
Renato |
|
| 返回顶部 |
|
 |
Layer-cake
 注册时间: 2013年3月18日 文章: 560 来自: Cape Town
|
 发表于: 周四 3月 27, 2014 2:31 pm 文章标题: |
|
 发表于: 周四 3月 27, 2014 2:31 pm 文章标题: |
|
|
Layer-cake wrote:
can you remove the plastic grip ring? they could be under there!! |
|
| 返回顶部 |
|
 |
cyrano
 注册时间: 2013年2月15日 文章: 871 来自: UK
Expire: 2016-12-30
|
 发表于: 周四 3月 27, 2014 5:35 pm 文章标题: |
|
 发表于: 周四 3月 27, 2014 5:35 pm 文章标题: |
|
|
cyrano wrote:
Alas the focus ring is made of alloy and doesn't come off.
apologies for over sizing but it helps. I will delete later.
Deleted. _________________ A whole bunch of stuff.
最后由 cyrano 于 周五 3月 28, 2014 3:54 am 编辑;共编辑 1 次 |
|
| 返回顶部 |
|
 |
Layer-cake
 注册时间: 2013年3月18日 文章: 560 来自: Cape Town
|
 发表于: 周四 3月 27, 2014 5:48 pm 文章标题: |
|
 发表于: 周四 3月 27, 2014 5:48 pm 文章标题: |
|
|
Layer-cake wrote:
I did actually do a tear down on one of these over a year ago but for the life of me I cant remember the inner construction of it!! luckily there are many people who have tried to fix these so quite a few walk throughs online:
Heres a google search for disassembly, im sure it will probably be a retainer ring inside that the screws arent holding into place anymore:
https://www.google.ie/search?q=helios+44m+4+disassembly&ie=utf-8&oe=utf-8&rls=org.mozilla:en-US:official&client=firefox-a&gws_rd=cr&ei=dWM0U9TvNcOu7Abn5YDACg |
|
| 返回顶部 |
|
 |
Lloydy
 注册时间: 2009年9月2日 文章: 7880 来自: Ironbridge. UK.
Expire: 2022-01-01
|
 发表于: 周四 3月 27, 2014 9:36 pm 文章标题: |
|
 发表于: 周四 3月 27, 2014 9:36 pm 文章标题: |
|
|
Lloydy wrote:
I have no idea about the later version, I was looking at my earlier ones. Could it be the same as Takumars - under the name ring there's two sets of three screws, maybe the set locking the barrel is loose?
Does the focus barrel rotate all the way round without stopping, or does it just rotate for a certain amount? _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| 返回顶部 |
|
 |
SXR_Mark
 注册时间: 2010年6月12日 文章: 506 来自: England
|
 发表于: 周四 3月 27, 2014 10:31 pm 文章标题: |
|
 发表于: 周四 3月 27, 2014 10:31 pm 文章标题: |
|
|
SXR_Mark wrote:
I think you have to remove (unscrew) the name ring then remove (three) screws that hold the filter ring on. Underneath the filter ring, between the focus ring and the inner helicoid, there are three screws that clamp the focus ring to the outer helicoid. I think that's how it works.
Mark _________________ Olympus OM-D E-M1 for everything |
|
| 返回顶部 |
|
 |
cyrano
 注册时间: 2013年2月15日 文章: 871 来自: UK
Expire: 2016-12-30
|
 发表于: 周五 3月 28, 2014 3:52 am 文章标题: |
|
 发表于: 周五 3月 28, 2014 3:52 am 文章标题: |
|
|
cyrano wrote:
The barrel only rotates to the near and far limit of the focus travel, I have bought this wrench to try :
http://www.ebay.co.uk/itm/200978102480?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 _________________ A whole bunch of stuff. |
|
| 返回顶部 |
|
 |
cyrano
 注册时间: 2013年2月15日 文章: 871 来自: UK
Expire: 2016-12-30
|
 发表于: 周二 4月 01, 2014 12:05 pm 文章标题: |
|
 发表于: 周二 4月 01, 2014 12:05 pm 文章标题: |
|
|
cyrano wrote:
Well, ordered the tool, took some bits off and still no sign of access to the focusing parts so I am now in possession of a non functioning but otherwise immaculate Helios 44M-4 if anyone is needing spares. _________________ A whole bunch of stuff. |
|
| 返回顶部 |
|
 |
cyrano
 注册时间: 2013年2月15日 文章: 871 来自: UK
Expire: 2016-12-30
|
 发表于: 周四 4月 03, 2014 6:18 am 文章标题: |
|
 发表于: 周四 4月 03, 2014 6:18 am 文章标题: |
|
|
cyrano wrote:
Ignore the above, I went in via the back of the lens and after 4 hours of frustration and dropping micro screws have now got a functional focus action. Now I can use the lens but it will need to be re-lubed and the aperture ring is now click less and loose but there you go. I'm pleased with my first attempt at a lens disassemble.
What a relief. _________________ A whole bunch of stuff. |
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|