MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

Jupiter 36B Focus ring broken
查看上一个主题 :: 查看下一个主题  


Reply

Edited

最后由 bernhardas 于 周六 4月 02, 2016 7:58 pm 编辑;共编辑 1 次


Reply

This sounds like the grub screws fixating the focusing grip/ring to the helicoid has come loose. Tightening the screws is usually easily done, once you have access to them. These are the same screws that are purposely loosened to adjust infinity focus (if you look for a description/ how to for your particular lens). The lenses I've fixed this issue with all had their screws accessed from the front, sometimbes directly behind the name ring.


Reply

edited

最后由 bernhardas 于 周三 4月 06, 2016 6:58 am 编辑;共编辑 1 次


Reply

Hi,

When bought this lens the focus ring was flimsy but working (3cm of play !). The focus ring is attached to an internal helicoid by two small headless screws (near 3.5 and infinity marks). Align the ring and tighten both screws. You may have to repeat this operation to get infinity mark properly aligned (if wasn't at infinity or minimal distance when the focus ring "broke").

Hope it helps.