| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
alaios
 注册时间: 2014年1月24日 文章: 724
|
 发表于: 周一 7月 21, 2014 8:19 pm 文章标题: pulling fp4 and hp5 |
|
 发表于: 周一 7月 21, 2014 8:19 pm 文章标题: pulling fp4 and hp5 |
|
|
alaios wrote:
Hi all,
I am leaving tomorrow for vacations in Greece and unfortunately my film order was not delivered in time
I have in stock on fp4 and 2 hp5.. so 125 iso and 400 iso respectively
As I do not want to start using nd filters (still do not know why )
I was thinking to pull the fp4 from iso 125 to iso 50
and the hp5 from iso 400 to 250.
Have you tried pulling those films?
Regards
Alex |
|
| 返回顶部 |
|
 |
philslizzy
 注册时间: 2012年8月7日 文章: 4753 来自: Cheshire, England
|
 发表于: 周二 7月 22, 2014 7:41 pm 文章标题: |
|
 发表于: 周二 7月 22, 2014 7:41 pm 文章标题: |
|
|
philslizzy wrote:
Just use the FP4 at its rated speed. Forget the HP5. There should be enough light in Greece.
You are complicating matters and ultimately your negatives will suffer. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| 返回顶部 |
|
 |
David
 注册时间: 2011年4月13日 文章: 1869 来自: Denver, Colorado
Expire: 2013-01-25
|
 发表于: 周二 7月 22, 2014 7:48 pm 文章标题: |
|
 发表于: 周二 7月 22, 2014 7:48 pm 文章标题: |
|
|
David wrote:
I've pushed and pulled both films. I like FP4+ at 100 and 50 ISO more than the rated speed. HP5+ is too grainy for my tastes, so I used Foma 400 and have used that from 50 to 3200 ISO with good results across the range. _________________ http://www.youtube.com/user/hancockDavidM |
|
| 返回顶部 |
|
 |
peterqd
 注册时间: 2007年2月28日 文章: 7449 来自: near High Wycombe, UK
Expire: 2014-01-04
|
 发表于: 周二 7月 22, 2014 8:40 pm 文章标题: |
|
 发表于: 周二 7月 22, 2014 8:40 pm 文章标题: |
|
|
peterqd wrote:
I don't understand this. You speak about ND filters, so you must think there's more light than the film can cope with. If you set the ASA
at a slower speed as you suggest, the camera will adjust by slowing the shutter speed, which will overexpose the film even more. You
need to set the ASA at a higher rating.
I agree with David about HP5 - it's a bit too grainy and it's way too fast for where you're going, unless you want to take some night or
low-light pics. The FP4 will be fine for daylight at its rated speed, as Phil says. But if you find you run out of shutter speed you can set
the ASA to 200, but don't change it for the rest of the roll once you've started taking pictures.
Anyway, have a good holiday! _________________ Peter - Moderator |
|
| 返回顶部 |
|
 |
Haider459
注册时间: 2014年10月31日 文章: 1
|
 发表于: 周五 10月 31, 2014 7:43 pm 文章标题: |
|
 发表于: 周五 10月 31, 2014 7:43 pm 文章标题: |
|
|
Haider459 wrote:
Thanks Renato, I will look into this.
I have used mostly Rodinal 1:150 to date and do like the results I get with 35mm. It may be this rough look you talk of but for me this is all I know. I like it as easy to develop and very cheap and nearly always gives results regardless of what camera setting you used. |
|
| 返回顶部 |
|
 |
PWhite214
 注册时间: 2014年4月19日 文章: 230 来自: Houston, Texas
|
 发表于: 周三 11月 05, 2014 12:20 am 文章标题: |
|
 发表于: 周三 11月 05, 2014 12:20 am 文章标题: |
|
|
PWhite214 wrote:
I have been developing all my film with Legacy Pro L110 diluted 100:1 (A HC110 equivalent developer) . One hour develop, water stop and normal fix, 68-70 Deg F. I have mixed brands and ISO's in the tank, up to 6 rolls at a time. I like the results. I have bought some Rodinal equivalent which should work as well, just have not tried it yet.
Phil |
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|