MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

4/135 Alu Sonnar dissasembly instructions needed
查看上一个主题 :: 查看下一个主题  


Reply

Dear forum members,
few days ago i have found again the lens that sparked my love for manual glass Smile

4/135 Sonnar in Alu finish. Tuzki with lens


ah it is so nice
Laugh 1

Unfortunately the time has left it's trace and it needs some attention - stiff focus, clouded glass, and in my case bent front ring which prevents the diaphragm ring from rotating.

It is in praktina mount if it matters, but i have found a nice way of adapting it to EOS. i have read here that if you remove the internal ring of T2-EOS adapter the lens fits just perfectly, and it is true Smile

Does anyone have step by step instructions on disassembly. I guess i need to take everything apart, cleaning helicoid, fixing the bent ring, cleaning glass, lubricating and putting it back again.

I promise to document everything in pictures for the generations Smile


Reply

Hm
I got the lens separated in 2 pieces:
the optical block and the focusing helicoid.




The focusing helicoid is easy to disassemble and clean, but I'm stuck with the lens part.

Any idea how to open this ?



Reply

Use a lens spanner, or the internal jaws of a vernier caliper, and unscrew this ring.



Reply

Thanks Lloydy,
yes this is possible but i can access only the last element and i want to clean all elements and check the aperture which is jammed (the front was hit really bad bending the filter thread and partially the aperture ring.)

Here 's how it looks from a different angle. Seems that it is one piece and unscrewing those 2-3 screws seen there will not benefit anything.

#1


#2


I guess that can go only from the front taking off the name ring.