MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

Meyer Primiplan 58/1.9: disassembly problem
查看上一个主题 :: 查看下一个主题  


Reply

My old M42 pre-set Meyer Primoplan 58/1.9 can certainly do with a relube of the focussing drive mechanism, but I have some problems taking it apart. Here's how far I have managed.

1. Remove three screws from the back to take off the camera mount ring.

2. Remove the two black-finish screws that work as pins for the straight slots, for effecting rectilinear travel

3. Unscrew lens unit from focussing drive unit, and then...

... the lens unit rotates a few turns and then it cannot go any further to come out of the focussing drive unit. I cannot see anything obvious that stops it from doing so.

I would greatly appreciate any insight into this; thank you in advance.