MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

Frankesteinizing a K10D
查看上一个主题 :: 查看下一个主题  


Reply

A morbid idea crossed my mind:do you think it could be possible to take a Pentax K10D and have it's mount changed into a Contax-Yashica mount?
The register distances are nearly identical (only 0.04 mm difference).
What would happen to the other features of the camera?
Would the image stabilization still work?
Would the focus confirmation still work?

Anyone has any idea?


Reply

2 aspirin and go to bed. Laughing Laughing


Reply

Orio 写道:
A morbid idea crossed my mind:do you think it could be possible to take a Pentax K10D and have it's mount changed into a Contax-Yashica mount?
The register distances are nearly identical (only 0.04 mm difference).
What would happen to the other features of the camera?
Would the image stabilization still work?
Would the focus confirmation still work?

Anyone has any idea?


Orio, probably the answer is yes to both questions. I owned the K100DS that has the same mount than the K10D, and placing a simple M42 to Pentax-K ring inside the mount, you got all the M42 lenses estabilized and focus confirmed... So this should also happen as well if you replace the mount by a Contax/yashica one... No electrical/electronic implications on this.

Jes.


Reply

I would say - probably.

My K100D looks like the mount would be easy enough to remove. It is designed to be removed, it seems.

However -

It is an evil and unnatural act, and you will suffer a horrible fate at the hands of the accursed creature you create.

(This warning is required by the mad scientist labeling act of 1987. )


Reply

Oh goody... I hope you are going to post pictures of the process Orio.
I fear upgrading my 400d to another cam other than the Canon, and losing my Contax Z's. But that Pentax has some nice features. Or am I getting too far ahead of myself here?


Reply

Shouldnt be harder then to remove the outer ring of the mount, which I think is only fitted with 4-5 screws. and then put in a machined C/Y ring? Whats the differences in the mount measurements except for the distance to the sensor? Inner diameter etc?


Reply

I think it could be tough. The lens release mechanism for C/Y is quite integral to the front end of a yashica or contax camera. You would need a donor camera for organs and, enough room to mount the whole assembly on the front of the pentax. Converting to leica or zuiko would be more feasible at least mechanically requiring some shimming I would guess. I say that not knowing the exact register distantance(s).


Reply

If it was only the ring, it wouldn't be a problem, I guess. But as Andy has already mentioned, any mechanical functional part makes more difficult.
If you want to try, I would recommend not to use a K10D, but try to find a used old Pentax DSLR (*istD or something) to play with. Wink


Reply

引用:
It is an evil and unnatural act, and you will suffer a horrible fate at the hands of the accursed creature you create.

(This warning is required by the mad scientist labeling act of 1987. )


HA HA

there would be auto focus contacts in the pentax mount maybe that need to be removed as well, maybe worth buying a broken pentax to perform your perverted experiments Smile The only thing that keeps me from ditching all my canon digital gear is the c\y issue if there were a working solution for this I would buy the K20D as soon as it was economically viable.


Reply

guys,
you know I am not able to make such precision handiwork - of course I would committ the job to a professional should I ever decided to do that.

@ Bruce... I don't even have the camera, Bruce! It's just speculation on my part for now. I love the colours of the k10D (many Pentax people seem to dislike them, I don't know why), but a Pentax mount would be of little use to me.

@ Andy: the donor camera is not a problem, there are many Yashicas around for little money, and surely I can find a broken one in no time on Ebay. Thanks for pointing out the mechanical problem. It's precious information.


Reply

Someone modified the K mount to accept C/Y lenses.

http://forum.contax-club.org/viewtopic.php?t=12815

(found this link in a previous discussion http://forum.mflenses.com/pentax-k10d-and-manual-focus-lenses-t3281,start,15.html


Reply

Thanks Guido, I remember that discussion. The adaptation of an existing mount would probably both ruin the existing mount and not be effective and safe with the C/Y lenses. I would think of replacing the mount entirely instead. Make it the C/Y digital reflex that does not exist. Of course such a purpose would be easier with a Canon camera (and I will do that one day probably on my current 5D, after I have gotten a second Canon FF body). But Pentax k10D colours are different and offer some strenghts in the reds that Canon has not.


Reply

Removing the whole mount is, how can I put it?, a "clean" way.
I like the idea to "manufacture" a "new" kind of camera.
If you have many good lenses with one mount (just like your CY, Orio), this might be a very clever solution.
I'll keep my fingers crossed for you that you can find a way to do it.


Reply

Jesito 写道:
Orio, probably the answer is yes to both questions. I owned the K100DS that has the same mount than the K10D, and placing a simple M42 to Pentax-K ring inside the mount, you got all the M42 lenses estabilized and focus confirmed... So this should also happen as well if you replace the mount by a Contax/yashica one... No electrical/electronic implications on this.

Jes.


Jes (like the new avatar),
I have the Pentax M42 lens to K mount adapter and do not get focus confirmation on my K10D.


Reply

maddog10 写道:
Jesito 写道:
Orio, probably the answer is yes to both questions. I owned the K100DS that has the same mount than the K10D, and placing a simple M42 to Pentax-K ring inside the mount, you got all the M42 lenses estabilized and focus confirmed... So this should also happen as well if you replace the mount by a Contax/yashica one... No electrical/electronic implications on this.

Jes.


Jes (like the new avatar),
I have the Pentax M42 lens to K mount adapter and do not get focus confirmation on my K10D.


Then you are doing something wrong. Wink


Reply

maddog10 写道:
I have the Pentax M42 lens to K mount adapter and do not get focus confirmation on my K10D.

Somewhere in the Custom Settings, you must have "Fl with S lens used" set to 2 to have focus confirmation.


Reply

Jieffe 写道:
maddog10 写道:
I have the Pentax M42 lens to K mount adapter and do not get focus confirmation on my K10D.

Somewhere in the Custom Settings, you must have "Fl with S lens used" set to 2 to have focus confirmation.


No, thats K100D. The only thing you need to set is "Allow Aperture Ring" with K10D. What you do need however, is to have the "Autofocus on halfpress" activated. And to be able to use Focus trapping with the K10D you need to short the golden contact on the camera mount, this is not needed with K100D though. Use aluminuim foil and tape if your lense don't do it.


最后由 zewrak 于 周六 6月 21, 2008 1:27 pm 编辑;共编辑 1 次


Reply

LucisPictor 写道:
Removing the whole mount is, how can I put it?, a "clean" way.
I like the idea to "manufacture" a "new" kind of camera.


Me too!
If one thinks about it, it makes more sense than the adapter thing, if one has a large range of lenses.
Adapters are always a risk, I almost lost a Eur 400 lens because of one of them.


Reply

Orio 写道:
LucisPictor 写道:
Removing the whole mount is, how can I put it?, a "clean" way.
I like the idea to "manufacture" a "new" kind of camera.


Me too!
If one thinks about it, it makes more sense than the adapter thing, if one has a large range of lenses.
Adapters are always a risk, I almost lost a Eur 400 lens because of one of them.


But is there a M42 adapter for C/Y? I'd hate to lose the M42's because of a C/Y mod.


Reply

zewrak 写道:

But is there a M42 adapter for C/Y? I'd hate to lose the M42's because of a C/Y mod.


Yes. I am in fact planning to buy one in order to be able to use my Zenitar on the Contax RX.


Reply

Orio 写道:
zewrak 写道:

But is there a M42 adapter for C/Y? I'd hate to lose the M42's because of a C/Y mod.


Yes. I am in fact planning to buy one in order to be able to use my Zenitar on the Contax RX.


Approved. Wink