| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
roglebk
 注册时间: 2018年3月13日 文章: 60
|
 发表于: 周二 5月 28, 2019 12:47 pm 文章标题: Replacement focus/zoom rubber |
|
 发表于: 周二 5月 28, 2019 12:47 pm 文章标题: Replacement focus/zoom rubber |
|
|
roglebk wrote:
Having a hard time finding replacement rubber. This is one alternative, ebay search "silicone rubber wristband". They stretch and is around 10mm wide. 4 was used for this Komine 90mm Macro.
 _________________ Underwater and land macro fanatic.
For trade
Konica Hexanon 21mm 2.8 AR
Kiron 105mm 2.8 macro Nikon AI-s
Isco: Two Tele-Westanar 135mm 3.5, Westagon 50mm 1.9 M42
Tokina AT-X 300mm 2.8 Pro Minolta/Sony A |
|
| 返回顶部 |
|
 |
Blazer0ne
 注册时间: 2018年9月12日 文章: 836
Expire: 2024-12-07
|
 发表于: 周二 5月 28, 2019 2:29 pm 文章标题: |
|
 发表于: 周二 5月 28, 2019 2:29 pm 文章标题: |
|
|
Blazer0ne wrote:
...
最后由 Blazer0ne 于 周二 2月 22, 2022 4:46 pm 编辑;共编辑 2 次 |
|
| 返回顶部 |
|
 |
philslizzy
 注册时间: 2012年8月7日 文章: 4753 来自: Cheshire, England
|
 发表于: 周一 7月 15, 2019 10:16 pm 文章标题: |
|
 发表于: 周一 7月 15, 2019 10:16 pm 文章标题: |
|
|
philslizzy wrote:
I use leather. You can buy small sheets online of use an old charity shop handbag/purse as a donor. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| 返回顶部 |
|
 |
Lucse
 注册时间: 2015年7月22日 文章: 166 来自: EU
|
 发表于: 周五 9月 13, 2019 4:05 pm 文章标题: |
|
 发表于: 周五 9月 13, 2019 4:05 pm 文章标题: |
|
|
Lucse wrote:
| Blazer0ne 写道: |
Congrats on the good fit! Finding a solid ring that can stretch and be snug is not always an easy query.
I use Silicone tape (for grip/thermal barrier/adapter backup) as well as Gymnastic or Kinesio tape; especially with raw projector lenses.
If you have access to the modeling app Blender, a 3D Printer, and the ability to extrude TPU like Ninja Flex there is really no limit to what can be reproduced. Plus, this material also stretches so that one size can fit many diameters.
 |
I see that you used them on Kilfitt lenses.
As a matter of fact these lenses have rubber bands that have the exact same ribble-size as some Tamron Adaptall-2 lenses.
I know this because I have a Kilfitt 300mm f/4 that was lacking it's rubbers and to replace these I just recently bought a broken Tamron SP 70-210 f/3.5 on Ebay.
(I payed 8 Euro for it and I let the seller know that he could keep the lens as I only needed the rubber bands).
They do not fit as the diameter is to small, but I can cut them up and glue them together where they meet.
Or I can try to stretch them by putting them in the fridge around an ever increasing bigger diameter. I think this will work.
Anyway, once I am done with it, the rubbers will not be distinguisable from the original ones. And my lens will be restaured in it's original glory (so to speak).
And I will be able to sell it at a good price because of this (if I ever want to do this, that is). I hardly doubt that you can say the same, to be honest .
I can imagine that your rubbers fit nicely and all that but they blend in about as much as a piranha at a poodle party, hahaha. |
|
| 返回顶部 |
|
 |
aidaho
 注册时间: 2018年4月29日 文章: 456 来自: Ukraine
|
 发表于: 周五 9月 13, 2019 6:01 pm 文章标题: |
|
 发表于: 周五 9月 13, 2019 6:01 pm 文章标题: |
|
|
aidaho wrote:
| Lucse 写道: |
They do not fit as the diameter is to small, but I can cut them up and glue them together where they meet. |
I've seen this before. Not nearly as discreet as you present this solution.
The second problem is: many lenses have adjustment screws under the rubber.
Once you pour your very reliable glueâ„¢ over them, they may never turn again.
I have had much fun drilling out such screws.
Doesn't seem like this is a solved issue.
We still in need of a reliable source of replacement rubber. _________________ https://www.flickr.com/photos/curry-hexagon/ |
|
| 返回顶部 |
|
 |
Lucse
 注册时间: 2015年7月22日 文章: 166 来自: EU
|
 发表于: 周五 9月 13, 2019 6:16 pm 文章标题: |
|
 发表于: 周五 9月 13, 2019 6:16 pm 文章标题: |
|
|
Lucse wrote:
| aidaho 写道: |
I've seen this before. Not nearly as discreet as you present this solution.
The second problem is: many lenses have adjustment screws under the rubber.
Once you pour your very reliable glueâ„¢ over them, they may never turn again.
I have had much fun drilling out such screws.
Doesn't seem like this is a solved issue.
We still in need of a reliable source of replacement rubber. |
Who says anything about glueing them to the lens ??
There is no need for that as one can glue them together on a thin strip of rubber.
And as the seem will be along the ribble of the rubber this can be done rather invisibly.
That source of reliable rubber is out there, you only have to look for it.
But of course, if you think that putting a band of 'snot slime' around the lenses is a better solution, please feel free to do so . |
|
| 返回顶部 |
|
 |
TeemÅ
 注册时间: 2016年4月7日 文章: 586 来自: Australia
|
 发表于: 周日 9月 15, 2019 4:10 pm 文章标题: |
|
 发表于: 周日 9月 15, 2019 4:10 pm 文章标题: |
|
|
TeemÅ wrote:
This site has the stuff you want. No idea where they get it - possibly just have endless leftover rolls of the stuff lol.
https://hugostudio.com/lenses-grip.html |
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|