MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

Sigma Mini Wide: interchangeable mounts
查看上一个主题 :: 查看下一个主题  


Reply

This might be helpful to someone. Mounts on Sigma Mini Wide lenses can be switched. Each lens is made to support different mounts. Aperture ring has different scales to be shown in transparent window, even orientations. At least for 4 different mounts. Quite a genius of Japan economical engineering. My switch was from Contax/Yashica to Olympus OM which i needed mint to supplement SLR camera. Perhaps this is valid for other focal lengths too (i cannot verify).


Reply

Any pictures?

Seems like an interesting idea, I think other lenses have been talked about before supporting something like this.


Reply

Do Sigma Mini-Wide II mounts fit Sigma Mini-Wide I lenses?


Reply

Three different systems but the ring at the bottom attached with screws is specific to Pentax (From the Sigma 28-50mm 1:2.8-3.5) There are three aperture scales on the ring. The one used lines up with the corresponding scale below (on the other side here because it is Pentax)



Reply

[quote="D1N0"]Three different systems but the ring at the bottom attached with screws is specific to Pentax (From the Sigma 28-50mm 1:2.8-3.5) There are three aperture scales on the ring. The one used lines up with the corresponding scale below (on the other side here because it is Pentax)


To complement D1n0's photo, this is internal situation where there are 4 different aperture slides. Aperture ring can be turned around 360 degrees to match the selection. Mounts fit accordingly. The calculation for this was high level. Don't know if Mini Wide II version still sponsors such option.