MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

Bronica ETRC
查看上一个主题 :: 查看下一个主题  


Reply

A couple of questions about a Bronica ETRC.

Will the film insert from an ETRS back fit inside the ETRC?

Why won't the trigger on the speed grip E always fire? Can it be adjusted?


Reply

camera-wiki.org/wiki/Bronica_ETR#Backs_and_inserts

The inserts interchange according to the above.

Not too sure about the speed grip not releasing the shutter.
My experience was with the SQ-A which used a similar mechanical interface for shutter release. Make sure the grip is securely threaded on to the base of the body. Slight looseness there will prevent the release mechanism from making full contact.

-D.S.


Reply

Doc Sharptail 写道:
camera-wiki.org/wiki/Bronica_ETR#Backs_and_inserts

The inserts interchange according to the above.

Not too sure about the speed grip not releasing the shutter.
My experience was with the SQ-A which used a similar mechanical interface for shutter release. Make sure the grip is securely threaded on to the base of the body. Slight looseness there will prevent the release mechanism from making full contact.

-D.S.


Thank you for that. I think I solved the trigger problem