MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

40D owners
查看上一个主题 :: 查看下一个主题  


Reply

Since I started getting the focus confirm adapters I noticed that aperture priority doesn't work very well anymore. No big problem but AV mode would be nice.

I remembered reading once about switching from EF-A to EF-S in custom functions fixed the exposure problem with out changing screens. Cfn IV-2.
Only take maybe a minute to change or go back. I think you can set the 30D the same way but am not sure of the others/probably

I gave it a try and it seems to work fine. Here are four examples out of many to demonstrate.

Yashica 50mm/1.7
converted from RAW with no processing of any kind

Factory setting EF-A




Cfn-IV-2




Reply

Good idea! (I have not realized this problem, though, cause I have seized to use the chipped adapters more or less...)
BTW, I think you have confused the last two pics, haven't you?


最后由 LucisPictor 于 周日 7月 27, 2008 8:45 am 编辑;共编辑 2 次


Reply

引用:
BTW, I think you have confused the last two pics, haven't you?


Looks like it, but no, that is the way they came out.

I only had the problem when I went to focus confirm adapters.


最后由 Schnauzer 于 周六 7月 26, 2008 11:05 pm 编辑;共编辑 1 次


Reply

great trick Ron! should be a sticky with a better tittle!


Reply

Thanks Poilu. Anyone is welcome to change the title anyway they would like.


Reply

Thanks much for the post.I did a few tests with my 40D today and it was pretty surprising. I will do a few more tomorrow and post the results.

Jules


Reply

Schnauzer 写道:


I remembered reading once about switching from EF-A to EF-S in custom functions fixed the exposure problem with out changing screens. Cfn IV-2.


On the 10D I have "AF lock /no AE lock" for that setting, is that what you have on the 40D?


Reply

Farside 写道:
Schnauzer 写道:


I remembered reading once about switching from EF-A to EF-S in custom functions fixed the exposure problem with out changing screens. Cfn IV-2.


On the 10D I have "AF lock /no AE lock" for that setting, is that what you have on the 40D?


Dave, in the 40D in custom functions

C.FNIV:OPERATION/OTHER

FOCUSING SCREEN
O:EF-A
1:EF-D
2:EF-S

After setting it says C.FN-5-2


Reply

LucisPictor 写道:
BTW, I think you have confused the last two pics, haven't you?

I too get this unexpected result with the 400D with the AF chip. Open aperture pictures are darker than when stopped down. Unfortunately on the 400D I don't have this custom setting Sad


Reply

Hi Ron, Thanks for the heads up on this issue. You inspired me to do some testing.

I thought that the same thing may occur with AF lenses so I tested one also.

Here are the results:

The tests were done in subdued fairly constant light, almost a studio setting, my living room while the family was out doing errands.

The shot is of my fireplace mantle. Lots of stories there. (Mir 37 shot below)



The blue at the top right is from a brilliantly blue sky outside a nearby window. These shots are not sharpend or color tweaked in any way and not resized. They are 100% crops from the raw files converted to .jpgs, all focused on the cat's paw tip extended toward the viewer.

Here is the AF test, F2.8 Tamron 28-75.



Basically the EF-S setting is slightly sharper and more contrasty. The contrast gain is probably from the added sharpness. I didn’t take the AF test any further because I only wanted to see if the “EF_A – EF_S” issue was happening there also and if so is the EF_S setting is in fact, better. It is.

(The EF_D setting is not good, worse than the other two so I didn't test it further)

Here’s where it gets interesting:

Here are the results from the MF lens, A MIR 37mm with a chipped adapter.

First set at F2.8

EF_A



Here’s the EF_S setting




Considerably sharper and much less color artifacts.

I tested at F8 however the same differences were seen so I didn‘t feel the need to post it.

Here the MIR was set at F11.

EF_A



EF_S



Again, sharper and much less color artifacts.


Thanks again, my 40D is now set on EF_S

Jules


Reply

I'm very pleased that you had the same results that I did Jules. It makes life a lot easier doesn't it!


Reply

Schnauzer 写道:

Dave, in the 40D in custom functions

C.FNIV:OPERATION/OTHER

FOCUSING SCREEN
O:EF-A
1:EF-D
2:EF-S

After setting it says C.FN-5-2


Ah, it's focusing screen related. Alas, the 10D had no firmware ability to cope with anything but the standard screen.


Reply

Sorry Dave.


Reply

Schnauzer 写道:
Sorry Dave.


No worries; just send me your 40D and I'll take care of it for you.