| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
Nesster
 注册时间: 2008年4月24日 文章: 5883 来自: NJ, USA
Expire: 2014-02-20
|
 发表于: 周六 8月 23, 2008 6:20 pm 文章标题: T4 and TX mounts compared |
|
 发表于: 周六 8月 23, 2008 6:20 pm 文章标题: T4 and TX mounts compared |
|
|
Nesster wrote:
[These are 500pix wide - for large and very large, I include links to the corresponding flickr page.]
T4 and TX mounts compared. These are the naked lens rears, the TX is in the middle, and it's a 28mm vs. the two teles so it has the lens element sticking out.
Each has the same tab - you push the little metal tab in and turn the collar in the O direction to release the mount. Re-attaching it, the collar is ratcheted and locks in place.
The TX has additional linkages available via the mount to permit open aperture metering. Note the little ears where the white arrow is pointing to the left on each lens - this is the aperture ring sensor and it lines up with the arrow when the lens is set to f/5.6. Which is why that aperture is in a different color - you set it there to attach a mount.
http://www.flickr.com/photos/nesster/2790256080/
These are the mounted lens rears, the TX is on the right, mounted on a T4 200mm lens.
Each has the same tab - you push the little metal tab in and turn the collar in the O direction to release the mount. Re-attaching it, the collar is ratcheted and locks in place.
On the web, it is said that you can mount a TX on a T4 lens, but rarely the other way around. Well, I managed to mount the TX on the 200mm T4, however I only got f/4 instead of f/3.5. So it can be done, with limitations.
The PX = pentax screw mount is a bit frustrating, it has a knurled knob that does NOT lock into place for manual operation (ie. on a K mount converter). I can still use it on the screw mount bodies though.
The CS mount in the middle is a mystery - what does CS stand for? It has a big push pin (you can see it at 5 o'clock) that closes the aperture. I'm using a hair bungee to hold it closed when I use this mount on the K100D. Otherwise it is just a M42.
The P/ES is a TX mount, a perfect reproduction of the SMC Takumar mount.
http://www.flickr.com/photos/nesster/2789407083
The rear of the mounts, unmounted.
http://www.flickr.com/photos/nesster/2790255354
The front of the mounts, ie. where the lens goes. You can tell the TX because it is the one that says TX on it. You line up the white arrow to the same on the lens, then tighten the ratcheted collar.
http://www.flickr.com/photos/nesster/2789406319 _________________ -Jussi
Camera photos
Print Photographica
|
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周六 8月 23, 2008 7:25 pm 文章标题: |
|
 发表于: 周六 8月 23, 2008 7:25 pm 文章标题: |
|
|
Attila wrote:
Thank you to showing these , they are vital information for us. |
|
| 返回顶部 |
|
 |
luisalegria
 注册时间: 2008年3月7日 文章: 6602 来自: San Francisco, USA
Expire: 2018-01-18
|
 发表于: 周日 8月 24, 2008 12:57 am 文章标题: |
|
 发表于: 周日 8月 24, 2008 12:57 am 文章标题: |
|
|
luisalegria wrote:
Very well done !
I'm also drawing a blank on the "CS" mount.
As for that annoying wheel on the screw mounts, I disable that by opening the T4 and removing the linkage. It turns the lens into manual aperture, much better for DSLR. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| 返回顶部 |
|
 |
Big Dawg
 注册时间: 2009年1月28日 文章: 2530 来自: Thach Alabama
|
 发表于: 周四 1月 29, 2009 9:00 am 文章标题: |
|
 发表于: 周四 1月 29, 2009 9:00 am 文章标题: |
|
|
Big Dawg wrote:
Some very useful info on the lens I'm looking at right now. We need more correct information on these as there is so much misinformation floating around. For instance...what serial number starts the TX line and ends the T4 line? When you look on auction sites, you see the release mechanism but the photos do not tell you which is a T4 and which is a TX. I constantly have to ask the seller to open the mount up and tell me if there is a TX in white letters there. _________________ Big Dawg |
|
| 返回顶部 |
|
 |
marcusBMG
 注册时间: 2012年12月7日 文章: 1392 来自: Conwy N Wales
|
 发表于: 周二 8月 27, 2019 2:25 pm 文章标题: |
|
 发表于: 周二 8月 27, 2019 2:25 pm 文章标题: |
|
|
marcusBMG wrote:
Resurrecting this thread in order to include a link to a thread discussing how to mod the T4 lens mount to work with a Pentax PK TX mount.
https://www.pentaxforums.com/forums/10-pentax-slr-lens-discussion/311306-converting-t4-lenses-tx-k-mount-adapter.html _________________ pentax ME super (retired)
Pentax K3-ii; pentax K-S2; Samsung NX 20; Lumix G1 + adapters;
Adaptall collection (proliferating!) inc 200-500mm 31A, 300mm f2.8, 400mm f4.
Primes: takumar 55mm; smc 28mm, 50mm; kino/komine 28mm f2's, helios 58mm, Tamron Nestar 400mm, novoflex 400mm, Vivitar 135mm close focus, 105mm macro; Jupiter 11A; CZJ 135mm.
A classic zoom or two: VS1 (komine), Kiron Zoomlock... |
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|