| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
Xpres
 注册时间: 2007年12月11日 文章: 964 来自: UK
Expire: 2014-10-28
|
 发表于: 周三 6月 18, 2008 3:35 pm 文章标题: Contax RTS Jammed |
|
 发表于: 周三 6月 18, 2008 3:35 pm 文章标题: Contax RTS Jammed |
|
|
Xpres wrote:
Very ocasionally I take out my RTS and today was one of those times. I had the winder attached and all was fine - and then it jammed and wouldn't wind on. The rewind button seems to be stuck in, the wind on lever is stuck also.
I can't see anything obvious with the bottom off.
Any ideas anyone?
Am I now the proud owner of a piece of junk? Or is the an easy fix? _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| 返回顶部 |
|
 |
Orio
注册时间: 2007年2月24日 文章: 29545 来自: West Emilia
Expire: 2012-12-04
|
 发表于: 周三 6月 18, 2008 3:52 pm 文章标题: |
|
 发表于: 周三 6月 18, 2008 3:52 pm 文章标题: |
|
|
Orio wrote:
Do things work without the winder attachment? _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| 返回顶部 |
|
 |
peterqd
 注册时间: 2007年2月28日 文章: 7449 来自: near High Wycombe, UK
Expire: 2014-01-04
|
 发表于: 周三 6月 18, 2008 4:05 pm 文章标题: |
|
 发表于: 周三 6月 18, 2008 4:05 pm 文章标题: |
|
|
peterqd wrote:
This sounds very similar to the problem I had with a Spotmatic recently, the mirror hadn't latched and this stops the shutter firing. I found a similar problem with a Minolta too, so maybe it will apply to your camera - worth a try I would think. Here's the thread showing how to cure it.
http://forum.mflenses.com/jammed-spotmatic-t7169,highlight,jammed.html _________________ Peter - Moderator |
|
| 返回顶部 |
|
 |
maddog10
 注册时间: 2008年4月8日 文章: 1072 来自: Maryland, USA
Expire: 2015-02-12
|
 发表于: 周三 6月 18, 2008 4:09 pm 文章标题: |
|
 发表于: 周三 6月 18, 2008 4:09 pm 文章标题: |
|
|
maddog10 wrote:
Does the camera/winder use a battery? I have had an Olympus OM10 jam in a manner similar to this, it needed the battery to operate correctly. _________________ Michael Hill |
|
| 返回顶部 |
|
 |
Xpres
 注册时间: 2007年12月11日 文章: 964 来自: UK
Expire: 2014-10-28
|
 发表于: 周三 6月 18, 2008 6:27 pm 文章标题: |
|
 发表于: 周三 6月 18, 2008 6:27 pm 文章标题: |
|
|
Xpres wrote:
Thanks for the comments.
The winder is off ( and works fine) but it's the camera that's stuck. The battery is OK.
Peter the mirror thing sounds good but the Contax looks a little different inside. I wonder which bit is connected to the mirror mechanism?
It seems to be the rewind button that's not popping back up and jamming the rest.
Any more thoughts? Here's a snap of bottom.
 _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| 返回顶部 |
|
 |
F16SUNSHINE
 注册时间: 2007年8月20日 文章: 5486 来自: Left Coast
Expire: 2011-11-18
|
 发表于: 周三 6月 18, 2008 6:29 pm 文章标题: |
|
 发表于: 周三 6月 18, 2008 6:29 pm 文章标题: |
|
|
F16SUNSHINE wrote:
Don't brick the camera. I had this problem one time with the rewind button on a Yashica FR (same design). It was stuck in and after I took off the bottom I could see nothing to repair easily. All just as you described. I took it to my repair shop and the tech fixed it while assessing the problem (no charge). You should look at Peters link. If that does not solve it take it in to a good shop. This one should be an easy problem either way. _________________ Moderator |
|
| 返回顶部 |
|
 |
peterqd
 注册时间: 2007年2月28日 文章: 7449 来自: near High Wycombe, UK
Expire: 2014-01-04
|
 发表于: 周三 6月 18, 2008 9:14 pm 文章标题: |
|
 发表于: 周三 6月 18, 2008 9:14 pm 文章标题: |
|
|
peterqd wrote:
Well, I don't know this camera at all so I can't give much help, but I'm sure Andy is right, it's a simple fix when you find it. Michael's thought about the battery was sensible, but if you can rule that out it certainly looks like a mechanical problem.
The rewind button was stuck in on the Spotmatic too, I don't think this is the cause, just a symptom. On the Pentax ME Super the latch is under a plate similar to the one in your pic, is there anything under it? There's got to be a lever or a ratchet somewhere that you can move, either to latch the mirror or to release the shutter. I can see several parts in your pic that might be it. Sorry I can't help more, it's frustrating for you. _________________ Peter - Moderator |
|
| 返回顶部 |
|
 |
Xpres
 注册时间: 2007年12月11日 文章: 964 来自: UK
Expire: 2014-10-28
|
 发表于: 周三 6月 18, 2008 11:37 pm 文章标题: |
|
 发表于: 周三 6月 18, 2008 11:37 pm 文章标题: |
|
|
Xpres wrote:
Thanks Peter - yes terribly frustrating. If I remove that plate I suspect a dozen springs will fly....... I'll find some courage tomorrow! _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| 返回顶部 |
|
 |
peterqd
 注册时间: 2007年2月28日 文章: 7449 来自: near High Wycombe, UK
Expire: 2014-01-04
|
 发表于: 周四 6月 19, 2008 9:35 am 文章标题: |
|
 发表于: 周四 6月 19, 2008 9:35 am 文章标题: |
|
|
peterqd wrote:
I've been trying to find any info on this problem, I hope this is helpful:
The camera has a magnetic shutter release, which has to be the green solenoid coil in your picture. It looks like the lever below this in the picture has a centre pivot, and when this is rocked by the solenoid it should release the shutter manually.
I found this on the Camera Repair Forum:
"On all the [Yashica] FR series (and the Contax RTS) the release magnet is at the bottom on the rewind side. It is usually yellow or green. You can manually release the shutter there. If you can wind and release manually, you have an electrical problem. The self timer is mechanical but closes a switch to release the shutter. If it works, but the shutter release button does not, or is intermittent, you have isolated the problem to the release button switch." _________________ Peter - Moderator |
|
| 返回顶部 |
|
 |
Xpres
 注册时间: 2007年12月11日 文章: 964 来自: UK
Expire: 2014-10-28
|
 发表于: 周四 6月 19, 2008 10:58 am 文章标题: |
|
 发表于: 周四 6月 19, 2008 10:58 am 文章标题: |
|
|
Xpres wrote:
Thanks for the fantastic info Peter. You're right on the mark about that switch but nothing happens when I try.
I think it must be something mechanical, but maybe deeper inside, that's jamming the rewind button. Whatever the answer it needs tearing down which would be fun but with little prospect of it going back together. It's a little more complex than the older stuff I usually play with. So it's in the box for now. I have a feeling another from ebay won't break the bank - unlike a repair bill!
Many thanks to all for your thoughts. _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| 返回顶部 |
|
 |
grafficcontrol
注册时间: 2008年12月1日 文章: 4
|
 发表于: 周一 12月 01, 2008 3:22 pm 文章标题: |
|
 发表于: 周一 12月 01, 2008 3:22 pm 文章标题: |
|
|
grafficcontrol wrote:
has this problem been resolved? I'm having the same problem! |
|
| 返回顶部 |
|
 |
grafficcontrol
注册时间: 2008年12月1日 文章: 4
|
 发表于: 周一 12月 01, 2008 3:38 pm 文章标题: |
|
 发表于: 周一 12月 01, 2008 3:38 pm 文章标题: |
|
|
grafficcontrol wrote:
any luck with this? I'm having the same problem! (sorry if double posted) |
|
| 返回顶部 |
|
 |
Xpres
 注册时间: 2007年12月11日 文章: 964 来自: UK
Expire: 2014-10-28
|
 发表于: 周一 12月 01, 2008 4:22 pm 文章标题: |
|
 发表于: 周一 12月 01, 2008 4:22 pm 文章标题: |
|
|
Xpres wrote:
No luck I'm afraid. Whatever caused the problem remains a mystery. I picked up a relatively cheap replacement quite easily - relative to the cost of getting it repaired that is. So if it's not an obvious fault I'd just get another. _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| 返回顶部 |
|
 |
grafficcontrol
注册时间: 2008年12月1日 文章: 4
|
 发表于: 周一 12月 01, 2008 4:56 pm 文章标题: |
|
 发表于: 周一 12月 01, 2008 4:56 pm 文章标题: |
|
|
grafficcontrol wrote:
Cool...thanks.
I'll keep an eye out for a replacement I think. |
|
| 返回顶部 |
|
 |
grafficcontrol
注册时间: 2008年12月1日 文章: 4
|
 发表于: 周二 12月 02, 2008 9:12 am 文章标题: |
|
 发表于: 周二 12月 02, 2008 9:12 am 文章标题: |
|
|
grafficcontrol wrote:
I managed to fix the problem! I nudged a metal bit that was attached to one of the cogs (it doesn't appear to be on your pic?). |
|
| 返回顶部 |
|
 |
Xpres
 注册时间: 2007年12月11日 文章: 964 来自: UK
Expire: 2014-10-28
|
 发表于: 周二 12月 02, 2008 10:06 am 文章标题: |
|
 发表于: 周二 12月 02, 2008 10:06 am 文章标题: |
|
|
Xpres wrote:
Well done !
Perhaps you've a photo of the magic bit? _________________ Film... and sometimes SD14, 5D2 and some other suff! |
|
| 返回顶部 |
|
 |
igottofly
注册时间: 2010年1月25日 文章: 28 来自: Berlin
|
 发表于: 周二 6月 22, 2010 4:00 pm 文章标题: I think I have solved a similar(or the same problem) in mine |
|
 发表于: 周二 6月 22, 2010 4:00 pm 文章标题: I think I have solved a similar(or the same problem) in mine |
|
|
igottofly wrote:
Ok. I bought one RTS on ebay because of the lens(planar 1.4) and the seller sold this one as defective because the winder was jammed.
At home I noticed that in fact, it wasn´t working, but I decided to buy a new battery and test it, you never know. Ok, didn´t work, so what? Let´s open the bottom an try to find out. With a small driver I was touching with care all thing that coud be a lever. And suddenly the shutter worked by himself!!! Wow! I try to wind it and now it was ok. But as soon as I try to press the shutter it was blocked again. I touch the same lever again and again it worked.
After this I pressed the film release button and he stayed down. And even if I open the back door he was down. Next move: with a coin I started to turn one piece in the left that is obvius it needed a coin to move. Suddenly something was unblocked, and I had the great feeling that I had solved the problem and in fact I did. I works very well now.
Conclusion: I don´t really remember the steps very well, but I will point in the picture above in this post the parts I touched. So, maybe with a little bit of luck and touching the same parts you will fix your. It was very easy for me, but i was very lucky, I had no idea of what I was doing,
So, the number 1 in the picture is the first piece I touched. Follow my arrow for the right movements. When I did this the shutter worked.
Wind again and try again.
After this press the film release button, he should stay down.
And in number 2 in the picture you will find the part I moved with a coin. After turning this one or two times to your right, turn it again to the left(initial position) Maybe you should touch in the number 1 (in the picture) again.
tRY AND do some variations, I did and it worked.
Good luck [img][/img][img]
[/img] _________________ Canon 7d (Movie mode)
with
Pentacon 135 2,8 Preset (M42) ; Pentacon multi coating 50/1,8 MC ; Carl Zeiss Distagon T* 35 2,8 (C/Y) ; RMC Tokina 28 2,8 (M42) ; CZ Sonnar 135/3,5 MC ; CZ Pancolar 1,8/50 ; Pentacon 29/2,8 ; Sonnar 85/2,8 |
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|