| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
f@tte
注册时间: 2013年3月1日 文章: 12
|
 发表于: 周三 3月 06, 2013 5:01 pm 文章标题: Dead/Hot Pixel test Question |
|
 发表于: 周三 3月 06, 2013 5:01 pm 文章标题: Dead/Hot Pixel test Question |
|
|
f@tte wrote:
I did a pixel test tonight using software Dead Pixel Test, with setting hot:60 and dead:250.
Result shown on below picture:
For example, last line on the right note paper means ISO=100, shutter=30s, hot pixel=2, dead=74
I did ISO 100 test again (on the right note) at the last of the test to double check.
There is at least two zero dead pixel on each ISO for different shutter setting. I am understand this as no FIX dead pixel on the camera. Am I correct? If I am right why is it so? Is the way I did the test reliable?
Machine for test: Canon 60D and Pentax 50MM 1.4 SMC |
|
| 返回顶部 |
|
 |
fotkino
 注册时间: 2011年5月4日 文章: 111 来自: Russia, Moscow
|
 发表于: 周三 3月 06, 2013 6:34 pm 文章标题: Re: Dead/Hot Pixel test Question |
|
 发表于: 周三 3月 06, 2013 6:34 pm 文章标题: Re: Dead/Hot Pixel test Question |
|
|
fotkino wrote:
| f@tte 写道: |
| I did a pixel test tonight using software Dead Pixel Test |
when you see a hot pixel, try to run the "sensor manual cleaning mode" from camera menu on a 15-20 sec. (I dont remove a lens).
during the "manual cleaning" camera is remaping bad pixel on a sensor and will close them itself.
camera brain apparently interpolates neighboring pixels, IMHO its work on all canon cameras, try _________________ _____________________________________
Sorry for my English |
|
| 返回顶部 |
|
 |
f@tte
注册时间: 2013年3月1日 文章: 12
|
 发表于: 周三 3月 06, 2013 6:53 pm 文章标题: Re: Dead/Hot Pixel test Question |
|
 发表于: 周三 3月 06, 2013 6:53 pm 文章标题: Re: Dead/Hot Pixel test Question |
|
|
f@tte wrote:
| fotkino 写道: |
| f@tte 写道: |
| I did a pixel test tonight using software Dead Pixel Test |
when you see a hot pixel, try to run the "sensor manual cleaning mode" from camera menu on a 15-20 sec. (I dont remove a lens).
during the "manual cleaning" camera is remaping bad pixel on a sensor and will close them itself.
camera brain apparently interpolates neighboring pixels, IMHO its work on all canon cameras, try |
I didn't realise that the camera is remaping bad pixel on the sensor in manual cleaning mode. Are you sure with it?
Anyway thank you for providing the info.
However it seems that for the same setting results are varied. It is hard to determine whether it gets improve or not? |
|
| 返回顶部 |
|
 |
fotkino
 注册时间: 2011年5月4日 文章: 111 来自: Russia, Moscow
|
 发表于: 周三 3月 06, 2013 7:05 pm 文章标题: Re: Dead/Hot Pixel test Question |
|
 发表于: 周三 3月 06, 2013 7:05 pm 文章标题: Re: Dead/Hot Pixel test Question |
|
|
fotkino wrote:
| f@tte 写道: |
I didn't realise that the camera is remaping bad pixel on the sensor in manual cleaning mode. Are you sure with it?
Anyway thank you for providing the info.
However it seems that for the same setting results are varied. It is hard to determine whether it gets improve or not? |
Yes, im 100% sure you can try this whith lens or whithout. Its a realy works with my 5D and 5DmkII.
And you can google "canon remaping hot pixel" and read about "manual cleaning mode" and remaping. _________________ _____________________________________
Sorry for my English |
|
| 返回顶部 |
|
 |
fotkino
 注册时间: 2011年5月4日 文章: 111 来自: Russia, Moscow
|
 发表于: 周三 3月 06, 2013 7:08 pm 文章标题: |
|
 发表于: 周三 3月 06, 2013 7:08 pm 文章标题: |
|
|
fotkino wrote:
http://shmuliphoto.wordpress.com/2009/12/03/fix-hot-pixel-canon/ _________________ _____________________________________
Sorry for my English |
|
| 返回顶部 |
|
 |
f@tte
注册时间: 2013年3月1日 文章: 12
|
 发表于: 周四 3月 07, 2013 3:40 am 文章标题: |
|
 发表于: 周四 3月 07, 2013 3:40 am 文章标题: |
|
|
f@tte wrote:
| fotkino 写道: |
| http://shmuliphoto.wordpress.com/2009/12/03/fix-hot-pixel-canon/ |
This is very helpful. Thank you! |
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|