| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周四 1月 31, 2013 3:53 pm 文章标题: EOS 10qd meter issues |
|
 发表于: 周四 1月 31, 2013 3:53 pm 文章标题: EOS 10qd meter issues |
|
|
iangreenhalgh1 wrote:
Hi folks
I bought a Canon EOS 10qd recently, in great shape, all works fine. But today I decided I wanted to use it without a tripod for the first time. I put on a 28mm lens and went for a walk, didn't get very far before realising something was wrong. With the ISO set to 64 and the camera pointed at a plain whitewashed wall, on a cloudless day, the EOS was telling me the exposure was 3 secs at f8. What? that's surely wrong. So I went home and grabbed my very accurate and reliable handheld meter and compared, same white wall. Handheld meter said 1/40, f8, which sounds right to me. So the EOS is wrong, and wrong by 7-8 stops.
I checked the exposure compensation, that was correctly set to 0.
Is there something I could be doing wrong or is this just yet another reason to hate Canon...
I swore I'd never buy another Canon item months ago, but needed a camera that would use unperforated film, hence the EOS 10qd. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周四 1月 31, 2013 3:59 pm 文章标题: |
|
 发表于: 周四 1月 31, 2013 3:59 pm 文章标题: |
|
|
Attila wrote:
pretty bad.. I do three things with all camera before I use them,
- shutter speed test
- light meter test id applicable
- light leak test if applicable |
|
| 返回顶部 |
|
 |
DigiChromeEd
 注册时间: 2009年12月29日 文章: 3468 来自: Northern Ireland
|
 发表于: 周四 1月 31, 2013 4:02 pm 文章标题: |
|
 发表于: 周四 1月 31, 2013 4:02 pm 文章标题: |
|
|
DigiChromeEd wrote:
I've been using Canon cameras for most of my life and have never had any inclination to move to another brand. I think you have just been incredibly unlucky with Canon products.  _________________ "I've got a Nikon camera, I like to take a photograph" - Paul Simon |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周四 1月 31, 2013 4:02 pm 文章标题: |
|
 发表于: 周四 1月 31, 2013 4:02 pm 文章标题: |
|
|
iangreenhalgh1 wrote:
Yes, I was fooled in this case because I was shooting Agfa microfilm in terrible light conditions in it and there is no information at all about how to expose and develop this film, as soon as I put a roll of FP4 in today, it became obvious.
Lesson learnt, next camera I buy with a meter I shall compare it to my handheld meter before using it.
So now I have to find another camera that will use unperf film and isn't a Canon. Most annoying. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周四 1月 31, 2013 4:07 pm 文章标题: |
|
 发表于: 周四 1月 31, 2013 4:07 pm 文章标题: |
|
|
iangreenhalgh1 wrote:
| DigiChromeEd 写道: |
I've been using Canon cameras for most of my life and have never had any inclination to move to another brand. I think you have just been incredibly unlucky with Canon products.  |
I don't know, the old stuff was okay but since the EOS range was introduced, it all just seems to be cheap and nasty, especially the lenses that are so badly made they often fall apart, which has happened to me on no less than 4 occassions now, I had a 1.8/50 just come apart in my hand, two 18-55 kit lenses that did similar and a 70-300 (I think it was) where the movable front bit just fell out one day. Then both the digital EOS I've owned have been really substandard in IQ compared to other cameras.
I will say this though, the very old FL 2.5/35 I have is a great lens, well it was, aperture and focus have both stuck solid now.  _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
DigiChromeEd
 注册时间: 2009年12月29日 文章: 3468 来自: Northern Ireland
|
 发表于: 周四 1月 31, 2013 4:30 pm 文章标题: |
|
 发表于: 周四 1月 31, 2013 4:30 pm 文章标题: |
|
|
DigiChromeEd wrote:
| iangreenhalgh1 写道: |
| DigiChromeEd 写道: |
I've been using Canon cameras for most of my life and have never had any inclination to move to another brand. I think you have just been incredibly unlucky with Canon products.  |
I don't know, the old stuff was okay but since the EOS range was introduced, it all just seems to be cheap and nasty, especially the lenses that are so badly made they often fall apart, which has happened to me on no less than 4 occassions now, I had a 1.8/50 just come apart in my hand, two 18-55 kit lenses that did similar and a 70-300 (I think it was) where the movable front bit just fell out one day. Then both the digital EOS I've owned have been really substandard in IQ compared to other cameras.
I will say this though, the very old FL 2.5/35 I have is a great lens, well it was, aperture and focus have both stuck solid now.  |
Honestly, I can't say I've ever had any bad experiences with any Canon kit I've owned. Having said that, I used to have a EOS10 and didn't like it - it was too light and plasticky. I currently have a EOS650, EOS50E, EOS1N, EOS10D and EOS5DMKII and they are all solidly built and well made (maybe the 50E wouldn't take a lot of heavy use!). As for Canon EF lenses, I have four. Two zooms (L series) and two primes (1.8/50 MKI and 4/100 Macro) and they are as well made as most other top brands. The cheaper lenses in their range I haven't had any experience with. _________________ "I've got a Nikon camera, I like to take a photograph" - Paul Simon |
|
| 返回顶部 |
|
 |
Lloydy
 注册时间: 2009年9月2日 文章: 7880 来自: Ironbridge. UK.
Expire: 2022-01-01
|
 发表于: 周四 1月 31, 2013 4:33 pm 文章标题: |
|
 发表于: 周四 1月 31, 2013 4:33 pm 文章标题: |
|
|
Lloydy wrote:
My old EOS600 film camera is excellent, a well made and very reliable camera. But I rarely use it as I haven't got any really good lenses for it anymore. I agree though that the quality of the Canon cameras took a downward turn, I should have been a natural Canon digital customer after the EOS600 and the many A Series cameras I had, but I bought a Pentax. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周四 1月 31, 2013 5:08 pm 文章标题: |
|
 发表于: 周四 1月 31, 2013 5:08 pm 文章标题: |
|
|
iangreenhalgh1 wrote:
The MKI 1.8/50 is okay in build, but the MkII is junk, Canon should be embarassed to sell such rubbish, they just fall apart after a few months of moderate use. I had a couple of old EF zooms and they were okay in build quality, but the IQ was pathetic, soft with vignetting and distortion even at f8 at the middle of the zoom range.
Anyways, I didn't want this to be a debate about Canon, just wondered if anyone had any suggestions as to where I might be going wrong with this EOS 10qd and it's metering, perhaps some arcane setting I possibly overlooked. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
std
 注册时间: 2010年2月9日 文章: 1826 来自: Bulgaria
|
 发表于: 周四 1月 31, 2013 6:25 pm 文章标题: |
|
 发表于: 周四 1月 31, 2013 6:25 pm 文章标题: |
|
|
std wrote:
In which mode are you using it? I think you should switch it to A (aperature priority) and set Aperature to 0.0.
In P the metering is off with manual lenses. _________________ Stefan
My lens list:
SLR MD: Rokkor 1,7/50 Exakta: Kilfitt-Makro-Kilar E 3.5/4cm; CZJ 2/50 Pancolar;M42: CZJ 2.8/50 Tessar; Mir-1B 2.8/37; Jupiter-9 2/85 T-mount: Tamron 5.9/200; Tamron 6.9/300; Tamron 7.5/400 C-mount: Cosmicar 1.8/50 Y/S: Sun 3.5/38-90, Sun 4/70-210 RF Contax RF: Jupiter-8 2/50; Contax G:CZ 2,8/21 Biogon T; CZ 2,8/28 Biogon T; CZ 2/35 Planar T; CZ 2/45 Planar T; CZ 2,8/90 Sonnar T |
|
| 返回顶部 |
|
 |
DigiChromeEd
 注册时间: 2009年12月29日 文章: 3468 来自: Northern Ireland
|
 发表于: 周四 1月 31, 2013 7:08 pm 文章标题: |
|
 发表于: 周四 1月 31, 2013 7:08 pm 文章标题: |
|
|
DigiChromeEd wrote:
| std 写道: |
In which mode are you using it? I think you should switch it to A (aperature priority) and set Aperature to 0.0.
In P the metering is off with manual lenses. |
In aperture priority mode with the aperture readout on the LCD panel set to 0.0 you are in stop-down metering mode. Set the required aperture on your lens and the camera will select the correct shutter speed - hopefully!  _________________ "I've got a Nikon camera, I like to take a photograph" - Paul Simon |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周四 1月 31, 2013 7:38 pm 文章标题: |
|
 发表于: 周四 1月 31, 2013 7:38 pm 文章标题: |
|
|
iangreenhalgh1 wrote:
This camera won't go to 0.0, it will only let me set 1.0 as a maximum. What I've been doing is using it in Av mode, setting the aperture on the lens, then setting the same aperture on the camera body. I tried it in manual mode too, both seem to make the same error in exposure - about 8 stops, which seems an awful lot, hence I suspected I was doing something wrong, but I can't figure out what, the instructions I found online told me to do it as I have been doing. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
DigiChromeEd
 注册时间: 2009年12月29日 文章: 3468 来自: Northern Ireland
|
 发表于: 周五 2月 01, 2013 7:05 am 文章标题: |
|
 发表于: 周五 2月 01, 2013 7:05 am 文章标题: |
|
|
DigiChromeEd wrote:
| iangreenhalgh1 写道: |
| This camera won't go to 0.0, it will only let me set 1.0 as a maximum. What I've been doing is using it in Av mode, setting the aperture on the lens, then setting the same aperture on the camera body. I tried it in manual mode too, both seem to make the same error in exposure - about 8 stops, which seems an awful lot, hence I suspected I was doing something wrong, but I can't figure out what, the instructions I found online told me to do it as I have been doing. |
Some EOS film cameras in stop-down mode set 0.0 and some 1.0. The EOS10 is 1.0. Try it again in sd mode using this value on the camera and your chosen aperture on the lens and see what happens. But I suspect the metering on the camera is faulty. _________________ "I've got a Nikon camera, I like to take a photograph" - Paul Simon |
|
| 返回顶部 |
|
 |
martinsmith99
 注册时间: 2008年8月31日 文章: 7029 来自: S Glos, UK
Expire: 2013-11-18
|
 发表于: 周五 2月 01, 2013 7:12 am 文章标题: |
|
 发表于: 周五 2月 01, 2013 7:12 am 文章标题: |
|
|
martinsmith99 wrote:
Yes, don't set the camera aperture to the lens aperture or it will be out. As mentioned, set to 0.0 or 1.0 and leave it there with non-EOS lenses. It's a bizarre system, but the metering will only operate correctly at full aperture.
I thing a chipped adapter may overcome the problem as it will tell the camera the lens is wide open. _________________ Casual attendance these days
最后由 martinsmith99 于 周五 2月 01, 2013 8:38 pm 编辑;共编辑 1 次 |
|
| 返回顶部 |
|
 |
std
 注册时间: 2010年2月9日 文章: 1826 来自: Bulgaria
|
 发表于: 周五 2月 01, 2013 7:42 am 文章标题: |
|
 发表于: 周五 2月 01, 2013 7:42 am 文章标题: |
|
|
std wrote:
Ah yes it's 1.0 on oldest cameras - on my EOS 650 you must set to Av and set aperature on body to 1.0 and don't change it while stopping down the lens. _________________ Stefan
My lens list:
SLR MD: Rokkor 1,7/50 Exakta: Kilfitt-Makro-Kilar E 3.5/4cm; CZJ 2/50 Pancolar;M42: CZJ 2.8/50 Tessar; Mir-1B 2.8/37; Jupiter-9 2/85 T-mount: Tamron 5.9/200; Tamron 6.9/300; Tamron 7.5/400 C-mount: Cosmicar 1.8/50 Y/S: Sun 3.5/38-90, Sun 4/70-210 RF Contax RF: Jupiter-8 2/50; Contax G:CZ 2,8/21 Biogon T; CZ 2,8/28 Biogon T; CZ 2/35 Planar T; CZ 2/45 Planar T; CZ 2,8/90 Sonnar T |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周五 2月 01, 2013 12:22 pm 文章标题: |
|
 发表于: 周五 2月 01, 2013 12:22 pm 文章标题: |
|
|
iangreenhalgh1 wrote:
Thanks for the tips guys, I'll try it again today and report on the outcome. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
DigiChromeEd
 注册时间: 2009年12月29日 文章: 3468 来自: Northern Ireland
|
 发表于: 周日 2月 17, 2013 8:09 pm 文章标题: |
|
 发表于: 周日 2月 17, 2013 8:09 pm 文章标题: |
|
|
DigiChromeEd wrote:
| iangreenhalgh1 写道: |
| Thanks for the tips guys, I'll try it again today and report on the outcome. |
Any joy? _________________ "I've got a Nikon camera, I like to take a photograph" - Paul Simon |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周日 2月 17, 2013 9:51 pm 文章标题: |
|
 发表于: 周日 2月 17, 2013 9:51 pm 文章标题: |
|
|
iangreenhalgh1 wrote:
Yes, it meters fine in manual mode if you set the aperture to 1.0 on the camera, doesn't work in any other mode. I'm going to replace the EOS with a Nikon f90 soon as it's proving almost impossible to use any M42 lenses on this EOS. I have tried three different M42-EOS adapters and the camera gives a bc error with all 3, I've ground one down to be as thing as possible and it still gives the bc error, but strangely works with my Nikkor 3.5/55 with EOS adapter. I might as well get a Nikon body to use the 3.5/55 as I can also use my Nikkor 2.8/24 that hits the mirror on the EOS. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
Lloydy
 注册时间: 2009年9月2日 文章: 7880 来自: Ironbridge. UK.
Expire: 2022-01-01
|
 发表于: 周日 2月 17, 2013 10:50 pm 文章标题: |
|
 发表于: 周日 2月 17, 2013 10:50 pm 文章标题: |
|
|
Lloydy wrote:
I've just tried my EOS600 with a T2 mount and an old Soligor and get no error messages, and it seems to meter OK. This camera will only register '1.0' as well, not zero.
I have used the 600 with manual lenses and it's worked well.
The 'bc' code is usually 'battery check', but it does include other stuff. On this 600 I had a bc code when I installed a new battery and it was the poor fit of the battery, I had to pack the back with a bit of paper. Well, the guy in the Canon dealership did it for me.  _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周一 2月 18, 2013 5:35 pm 文章标题: |
|
 发表于: 周一 2月 18, 2013 5:35 pm 文章标题: |
|
|
iangreenhalgh1 wrote:
It's rather wierd, It was working with M42 lenses for a while, but not I get that bc error and the mirror hangs up. Now, after grinding the adapter down as much as I can, it still hangs the mirror and flashes bc. However, if I unlock the adapter and turn it about 15-20 degrees counterclockwise it will shoot. I winder if the mirror has slipped a little bit? It doesn't look like it has. Why it worked and now it doesn't is beyond me. I'll take the file to the adapter again and see if I can't remove some more metal. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
|
|