| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
shad309
 注册时间: 2008年3月8日 文章: 453 来自: Illinois, USA
|
 发表于: 周六 3月 15, 2008 9:54 pm 文章标题: Help with stop down pin |
|
 发表于: 周六 3月 15, 2008 9:54 pm 文章标题: Help with stop down pin |
|
|
shad309 wrote:
I have a 200mm that has the auto stop down pin and my adapter has no flange to push it in. Other than buying another M42 adapter or using it wide open, can I adjust it so it is permanently pushed in? |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周六 3月 15, 2008 10:37 pm 文章标题: |
|
 发表于: 周六 3月 15, 2008 10:37 pm 文章标题: |
|
|
Attila wrote:
yes
carefully glued is fine |
|
| 返回顶部 |
|
 |
shad309
 注册时间: 2008年3月8日 文章: 453 来自: Illinois, USA
|
 发表于: 周日 3月 16, 2008 12:11 am 文章标题: |
|
 发表于: 周日 3月 16, 2008 12:11 am 文章标题: |
|
|
shad309 wrote:
should I use something like JB Weld or would you suggest something else? Thanks again! |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周日 3月 16, 2008 12:26 am 文章标题: |
|
 发表于: 周日 3月 16, 2008 12:26 am 文章标题: |
|
|
Attila wrote:
Any kind of glue is ok what is capable to fix metal and dry fast.Just need to carefully do it, if going inside into the lens it will not works any more. |
|
| 返回顶部 |
|
 |
shad309
 注册时间: 2008年3月8日 文章: 453 来自: Illinois, USA
|
 发表于: 周日 3月 16, 2008 12:42 am 文章标题: |
|
 发表于: 周日 3月 16, 2008 12:42 am 文章标题: |
|
|
shad309 wrote:
No problem, I thought it could be done that way but wanted to check with others first. Thanks! |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周日 3月 16, 2008 12:45 am 文章标题: |
|
 发表于: 周日 3月 16, 2008 12:45 am 文章标题: |
|
|
Attila wrote:
Somebody suggested long time ago another solution, I remember it was good , but I don't remember in details. |
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周日 3月 16, 2008 12:49 am 文章标题: |
|
 发表于: 周日 3月 16, 2008 12:49 am 文章标题: |
|
|
Attila wrote:
Finally I found it...
http://forum.mflenses.com/viewtopic.php?t=4485&highlight=&sid=8742db08375b4e3ff20e4f68db0d482c
Take a look on Rick suggestion. |
|
| 返回顶部 |
|
 |
shad309
 注册时间: 2008年3月8日 文章: 453 来自: Illinois, USA
|
 发表于: 周日 3月 16, 2008 2:50 am 文章标题: |
|
 发表于: 周日 3月 16, 2008 2:50 am 文章标题: |
|
|
shad309 wrote:
Atilla, that must have been driving you crazy for you to search for that link! I am glad you found it though I will be using the Qtip version so that this can be reversed if need be.
I am glad nobody charges a fee to be here, but I would pay if you did!!! |
|
| 返回顶部 |
|
 |
kansalliskala
 注册时间: 2007年7月19日 文章: 5122 来自: Southern Finland countryside
Expire: 2016-12-30
|
 发表于: 周一 3月 17, 2008 2:29 pm 文章标题: |
|
 发表于: 周一 3月 17, 2008 2:29 pm 文章标题: |
|
|
kansalliskala wrote:
Try first this thing: first put the aperture to widest possible say 3.5 and push the pin. Then set the aperture like 16 and try again. If there is really much difference in the force needed like that the 3.5 needs much more force, then the super glue could solution could damage the spring mechanism and eventually destroy it? _________________ MF: Kodak DCS SLR/c; Samsung NX10; OM-10; Canon T50
Zuiko 28/3.5, Distagon 35/2.8; Yashica ML 50/2;
Zuiko 50/1.4; S-M-C 120/2.8; Zuiko 135/3.5; 200/5;
Tamron AD1 135/2.8, Soligor 180/3.5; Tamron AD1 300/5.6
Tamron zooms: 01A, Z-210
Yashicaflex C; Київ 4 + Юпитер 8, 11; Polaroid 100; Olympus XA; Yashica T3
Museum stuff: Certo-Phot; Tele-Edixon 135; Polaris 90-190; Asahi Bellows; Ixus IIs
Projects: Agfa Isolette III (no shutter), Canon AE-1D (no sensor),
Nikon D80 (dead), The "Peace Camera"
AF: Canon, Tokina, Sigma Video: JVC GZ-MG275E |
|
| 返回顶部 |
|
 |
j.lukow
 注册时间: 2007年10月3日 文章: 858 来自: Lindsay Ontario, Canada
Expire: 2021-11-25
|
 发表于: 周六 5月 31, 2008 3:36 am 文章标题: |
|
 发表于: 周六 5月 31, 2008 3:36 am 文章标题: |
|
|
j.lukow wrote:
I know this is late but I thought I'd mention it . . .
The Roxsen M42 to MD adapter I use for my Minolta keeps the stop down pin always depressed.
Personally I'm not keen on this, but could be a universal solution if you found the right one. _________________ Custom woodworking where my passion tries to earn a living. Photography one of my many hobbies / interests.Jim Lukow
Jim's Kit:
Minolta Kit: Minolta X570 & Autowinder G, Minolta SRT200
LENSES:Minolta - 45mm & 50mm F1:2, PF 58mm F1:1.4, Tamron 28mm f1:2.5, Tamron SP 35-80mm f1:2.8/3.8 & CF TeleMacro zoom 80-210 f1:3.8, Vivitar f3.0~4.5 35-200mm macro focusing zoom, f 2.8 28mm CF Wide angle, 2x macro focus teleconverter,Sigma F4 25-250, f 2.8~4 35-70mm zoom master,Tokina SD f4-5.6 70-210 zoom, f4.5 80-200 "Ultra" Zoom,AutoImage 135mm F1:2.8, Spiratone 400mm f1:6.3, Magicon f3.5-4.8 35-70mm macro zoom,Quantary f8-500 Mirror/macro lens, Accura MD mount Macro bellows
M42 Kit:Praktica PLC2,Yashica TL Electro X
LENSES:Meyer Goerlitz Oreston 50mm f1:1.8 , Auto Yashinon DX 1:1.7 50mm,Steinheil Munchen Culminar 135mm f4.5, Adaptall-2 M42 adapter
Zeiss . . . Zeiss Contaflex 126 system, Zeiss Contaflex Super
Medium Format: Pentacon sixTL
Hasselblad 500c/m - CZ 2.8-80mm planar, CZ 4-150mm sonnarCF |
|
| 返回顶部 |
|
 |
kansalliskala
 注册时间: 2007年7月19日 文章: 5122 来自: Southern Finland countryside
Expire: 2016-12-30
|
 发表于: 周五 6月 13, 2008 10:26 am 文章标题: |
|
 发表于: 周五 6月 13, 2008 10:26 am 文章标题: |
|
|
kansalliskala wrote:
Again. Remember to examine what type the pin-aperture link is. I made a drawing -- >
I think fixing a "Fujinon" type can damage the mechanism. _________________ MF: Kodak DCS SLR/c; Samsung NX10; OM-10; Canon T50
Zuiko 28/3.5, Distagon 35/2.8; Yashica ML 50/2;
Zuiko 50/1.4; S-M-C 120/2.8; Zuiko 135/3.5; 200/5;
Tamron AD1 135/2.8, Soligor 180/3.5; Tamron AD1 300/5.6
Tamron zooms: 01A, Z-210
Yashicaflex C; Київ 4 + Юпитер 8, 11; Polaroid 100; Olympus XA; Yashica T3
Museum stuff: Certo-Phot; Tele-Edixon 135; Polaris 90-190; Asahi Bellows; Ixus IIs
Projects: Agfa Isolette III (no shutter), Canon AE-1D (no sensor),
Nikon D80 (dead), The "Peace Camera"
AF: Canon, Tokina, Sigma Video: JVC GZ-MG275E |
|
| 返回顶部 |
|
 |
Poolhall
 注册时间: 2008年2月25日 文章: 1296
|
 发表于: 周日 6月 15, 2008 5:09 pm 文章标题: |
|
 发表于: 周日 6月 15, 2008 5:09 pm 文章标题: |
|
|
Poolhall wrote:
You don't necessarily need the q-tip solution, I used the insulation from electrical wire to do the same job on my Pentacon 29mm, its reversible and seems to hold the pin in place easily. |
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|