| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
philslizzy
 注册时间: 2012年8月7日 文章: 4753 来自: Cheshire, England
|
 发表于: 周五 5月 17, 2013 1:39 pm 文章标题: How to make large format camera? |
|
 发表于: 周五 5月 17, 2013 1:39 pm 文章标题: How to make large format camera? |
|
|
philslizzy wrote:
Ok I'm interested in having a go at large format photography. I have seen plans galore on how to make a camera so thats not too much of a problem. I also have a shutter and a couple of lenses suitable for at least 5x4. So I'm set there. So for the front end I'm ok. Focusing screen sorted too.
Film holders, what do I need? And is designing the camera from the back to the front the best way to go about it?
I see plate holders on ebay for a variety of cameras made of both wood and metal.
Are they ok?
Is there a standard 'fitting'?
How can I attach them to my camera? _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| 返回顶部 |
|
 |
mmelvis
 注册时间: 2010年5月24日 文章: 1326 来自: Florida,USA
Expire: 2015-05-09
|
 发表于: 周五 5月 17, 2013 6:19 pm 文章标题: |
|
 发表于: 周五 5月 17, 2013 6:19 pm 文章标题: |
|
|
mmelvis wrote:
You can pickup a back like this on ebay or a local used camera store
点击此处在 eBay 上查看
点击此处在 eBay 上查看
Film holders like this
点击此处在 eBay 上查看
点击此处在 eBay 上查看
If you watch ebay and are patient you can get a complete 4x5 camera for less than $100 US.
点击此处在 eBay 上查看
Also be sure to look around over at http://www.largeformatphotography.info/ sometimes you can get a great deal there
(edit) I've had to re-format the ebay links - please make use of the ebay item number buttons made available for that purpose, else it makes a mess of the page.
Mod Farside.
Thank you for the note, I will use the ebay button next time
最后由 mmelvis 于 周六 5月 18, 2013 1:16 am 编辑;共编辑 1 次 |
|
| 返回顶部 |
|
 |
Farside
 注册时间: 2007年9月1日 文章: 6579 来自: Ireland
Expire: 2013-12-27
|
 发表于: 周五 5月 17, 2013 6:23 pm 文章标题: |
|
 发表于: 周五 5月 17, 2013 6:23 pm 文章标题: |
|
|
Farside wrote:
What we know as the Graflex film holder became (indeed, was already - I have a 100yr old cycle camera that uses it) a de-facto standard for 5x4, so you won't go wrong using that. I suspect it originated with Kodak in the times when they took over Graflex.
Rite-Way, Linhof, Graflex, Fidelity all made them and you can often find them at reasonable prices, for a few bucks each. There's the usual lottery of how good and light-tight they are, of course. From what I gather, you're as well to avoid the original wooden Graflex holders - warping, light leaks and pain.
To build a film holder back is really simple - once you've established your film plane, you measure what you need to surround it with (wooden moulding, for example) and hold the holder in place with rubber bands, at its simplest.
You could pick up a Graflex spring back or splash out a bit more for a Graflok back to make it much easier.
Doddle really; the rest is just a box. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| 返回顶部 |
|
 |
dan_
 注册时间: 2012年12月5日 文章: 1070 来自: Romania
Expire: 2016-12-19
|
 发表于: 周五 5月 17, 2013 9:17 pm 文章标题: |
|
 发表于: 周五 5月 17, 2013 9:17 pm 文章标题: |
|
|
dan_ wrote:
Or you can use the Grafmatic film holders with 6 sheets of film:
http://www.ebay.com/sch/i.html?_trksid=p3984.m570.l1311.R1.TR5.TRC1&_nkw=grafmatic&_sacat=0&_from=R40
They cost more but you don't have to change the holder for every picture you make. |
|
| 返回顶部 |
|
 |
kendo1
 注册时间: 2012年12月7日 文章: 171 来自: Edinburgh
|
 发表于: 周五 5月 17, 2013 9:58 pm 文章标题: |
|
 发表于: 周五 5月 17, 2013 9:58 pm 文章标题: |
|
|
kendo1 wrote:
I have an old folder that I'll have to look out. It was my granddad's.
Maybe someone here could make use of it?
I'll post some pics of it tomorrow. |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周六 5月 18, 2013 10:18 am 文章标题: |
|
 发表于: 周六 5月 18, 2013 10:18 am 文章标题: |
|
|
iangreenhalgh1 wrote:
9x12 cameras are really cheap and many of them have great lenses, I'm probably going to get one as I can't afford a 4x5. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
philslizzy
 注册时间: 2012年8月7日 文章: 4753 来自: Cheshire, England
|
 发表于: 周六 5月 18, 2013 4:06 pm 文章标题: |
|
 发表于: 周六 5月 18, 2013 4:06 pm 文章标题: |
|
|
philslizzy wrote:
| iangreenhalgh1 写道: |
| 9x12 cameras are really cheap and many of them have great lenses, I'm probably going to get one as I can't afford a 4x5. |
9x12 inches or cm?
edit: I picked this up today from Real Camera, a Fidelity Astra double film holder 4x5 So perhaps this can be my basis. There are more in the shop for £10 each which looks like the going rate.
photo taken with a Photax 35mm f2.8 on my NEX. Soft at full aperture. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| 返回顶部 |
|
 |
Farside
 注册时间: 2007年9月1日 文章: 6579 来自: Ireland
Expire: 2013-12-27
|
 发表于: 周日 5月 19, 2013 12:14 pm 文章标题: |
|
 发表于: 周日 5月 19, 2013 12:14 pm 文章标题: |
|
|
Farside wrote:
| iangreenhalgh1 写道: |
| 9x12 cameras are really cheap and many of them have great lenses, I'm probably going to get one as I can't afford a 4x5. |
The over-priced greedy bstards have latched onto them now; but it's still possible to pick one up for cheap. Anything with Voigtlander on it has rocketed, if the seller knows what it is. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| 返回顶部 |
|
 |
mmelvis
 注册时间: 2010年5月24日 文章: 1326 来自: Florida,USA
Expire: 2015-05-09
|
 发表于: 周三 5月 22, 2013 12:53 am 文章标题: |
|
 发表于: 周三 5月 22, 2013 12:53 am 文章标题: |
|
|
mmelvis wrote:
| philslizzy 写道: |
| iangreenhalgh1 写道: |
| 9x12 cameras are really cheap and many of them have great lenses, I'm probably going to get one as I can't afford a 4x5. |
9x12 inches or cm?
edit: I picked this up today from Real Camera, a Fidelity Astra double film holder 4x5 So perhaps this can be my basis. There are more in the shop for £10 each which looks like the going rate.
photo taken with a Photax 35mm f2.8 on my NEX. Soft at full aperture. |
Great start to getting your 4x5 kit going |
|
| 返回顶部 |
|
 |
philslizzy
 注册时间: 2012年8月7日 文章: 4753 来自: Cheshire, England
|
 发表于: 周四 5月 23, 2013 11:32 am 文章标题: |
|
 发表于: 周四 5月 23, 2013 11:32 am 文章标题: |
|
|
philslizzy wrote:
Focusing screen is simple. I was told by many that some abrasive paste over clear plastic is the way to do it. I think not!!
Laminate sheets, unlaminated make a lovely focus screen show fine detail. Naturally They would have to be attached to something firmer, like glass or perspex. Although I expect you could find heavy duty stuff thet will work on its own.
 _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周四 5月 23, 2013 3:03 pm 文章标题: |
|
 发表于: 周四 5月 23, 2013 3:03 pm 文章标题: |
|
|
iangreenhalgh1 wrote:
I meant 9x12cm. I have an Ernemann Heag II I need to restore, go all the bits, just not had the patience to do it yet.
That's a good tip Phil. When I needed a ground glass for an experiment, I took the plastic from an old CD case and rubbed it with the finest emery paper I had, works okay, I could focus with it. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
philslizzy
 注册时间: 2012年8月7日 文章: 4753 来自: Cheshire, England
|
 发表于: 周五 5月 24, 2013 10:54 am 文章标题: |
|
 发表于: 周五 5月 24, 2013 10:54 am 文章标题: |
|
|
philslizzy wrote:
I have an old 118 Kodak somewhere, I wonder if a conversion could be done??
But I did want to make my own camera from scratch.
Re using laminate as a screen its a little floppy, it would be good sandwiched between two sheets of clear acrylic - such as cd covers. Thanks for your tip Ian!! _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| 返回顶部 |
|
 |
ZoneV
 注册时间: 2009年11月9日 文章: 1633 来自: Germany
Expire: 2011-12-02
|
 发表于: 周五 5月 31, 2013 4:41 pm 文章标题: |
|
 发表于: 周五 5月 31, 2013 4:41 pm 文章标题: |
|
|
ZoneV wrote:
I have some links to largeformat tinkering on my photo-tinkering-link-page, please scroll down to the bottom of the page.
I grinded a mate screen, made tests with a hydrofluoric acid solution, but this acid is devilish. Avoid it! _________________ Camera modification, repair and DIY - some links to look through: http://www.4photos.de/camera-diy/index-en.html
I AM A LENS NERD!
Epis, Elmaron, Emerald, Ernostar, Helioplan and Heidosmat.
Epiotar, Kameraobjektiv, Anastigmat, Epis, Meganast, Magnagon, Quinar, Culmigon, Novotrinast, Novflexar, Colorplan, Sekor, Kinon, Talon, Telemegor, Xenon, Xenar, Ultra, Ultra Star. Tessar, Janar, Visionar, Kiptar, Kipronar and Rotelar.
|
|
| 返回顶部 |
|
 |
philslizzy
 注册时间: 2012年8月7日 文章: 4753 来自: Cheshire, England
|
 发表于: 周六 6月 01, 2013 10:34 am 文章标题: |
|
 发表于: 周六 6月 01, 2013 10:34 am 文章标题: |
|
|
philslizzy wrote:
| ZoneV 写道: |
I have some links to largeformat tinkering on my photo-tinkering-link-page, please scroll down to the bottom of the page.
I grinded a mate screen, made tests with a hydrofluoric acid solution, but this acid is devilish. Avoid it! |
Anyone interested in Hydrofluoric acid can get it at Dental Depots but collect only as its dangerous. Very dangerous, can cause nerve damage even when 'washed off'
Use laminate sheets its safer. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| 返回顶部 |
|
 |
Farside
 注册时间: 2007年9月1日 文章: 6579 来自: Ireland
Expire: 2013-12-27
|
 发表于: 周六 6月 01, 2013 11:50 pm 文章标题: |
|
 发表于: 周六 6月 01, 2013 11:50 pm 文章标题: |
|
|
Farside wrote:
There's absolutely no need to acid etch anyway. If you want to use glass just get some carborundum paste of various sizes, or even some emery paper and grind on... _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| 返回顶部 |
|
 |
dan_
 注册时间: 2012年12月5日 文章: 1070 来自: Romania
Expire: 2016-12-19
|
 发表于: 周日 6月 02, 2013 1:36 pm 文章标题: |
|
 发表于: 周日 6月 02, 2013 1:36 pm 文章标题: |
|
|
dan_ wrote:
| Farside 写道: |
| There's absolutely no need to acid etch anyway. If you want to use glass just get some carborundum paste of various sizes, or even some emery paper and grind on... |
An article about how to make it yourself:
http://www.apug.org/forums/forum216/78392-making-ground-glass-focus-screen.html
And you can buy what you need really cheap:
http://www.ebay.com/itm/diy-GROUND-GLASS-FOCUS-SCREEN-for-large-format-cameras-/350799051440?pt=UK_Replacement_Parts_Film_Camera_Parts&hash=item51ad40bab0
If you are interested I have somewhere a Toyo 4x5 Revolving Graflok Spring Back in very good shape that I could sell for cheap (let's say 25 Euros+shipping). I've got it some time ago for a DIY project but finally I've used a Linhof back instead.
It looks like this one but is missing the ground glass:
http://www.ebay.com/itm/4x5-Toyo-View-Revolving-Graflok-Spring-Back-w-Ground-Glass-for-45AII-45F-45GII-/151039727026?pt=US_Film_Backs_Holders&hash=item232aab55b2 |
|
| 返回顶部 |
|
 |
philslizzy
 注册时间: 2012年8月7日 文章: 4753 来自: Cheshire, England
|
 发表于: 周日 6月 02, 2013 6:56 pm 文章标题: |
|
 发表于: 周日 6月 02, 2013 6:56 pm 文章标题: |
|
|
philslizzy wrote:
as I said, laminate sheet is perfect. No grinding, no chemicals. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| 返回顶部 |
|
 |
David
 注册时间: 2011年4月13日 文章: 1869 来自: Denver, Colorado
Expire: 2013-01-25
|
 发表于: 周四 8月 29, 2013 1:24 am 文章标题: |
|
 发表于: 周四 8月 29, 2013 1:24 am 文章标题: |
|
|
David wrote:
_________________ http://www.youtube.com/user/hancockDavidM |
|
| 返回顶部 |
|
 |
philslizzy
 注册时间: 2012年8月7日 文章: 4753 来自: Cheshire, England
|
|
| 返回顶部 |
|
 |
philslizzy
 注册时间: 2012年8月7日 文章: 4753 来自: Cheshire, England
|
 发表于: 周四 8月 29, 2013 11:34 am 文章标题: |
|
 发表于: 周四 8月 29, 2013 11:34 am 文章标题: |
|
|
philslizzy wrote:
ooh whats happened here? My message space is empty like David's. OK removed David's quotes and it shows. Weird. PM sent to Attila _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| 返回顶部 |
|
 |
Lloydy
 注册时间: 2009年9月2日 文章: 7880 来自: Ironbridge. UK.
Expire: 2022-01-01
|
 发表于: 周四 8月 29, 2013 6:44 pm 文章标题: |
|
 发表于: 周四 8月 29, 2013 6:44 pm 文章标题: |
|
|
Lloydy wrote:
Why paint it? that looks wonderful as it is. Just imaging the looks of envy from the guys with big white lenses.  _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| 返回顶部 |
|
 |
philslizzy
 注册时间: 2012年8月7日 文章: 4753 来自: Cheshire, England
|
 发表于: 周四 8月 29, 2013 10:55 pm 文章标题: |
|
 发表于: 周四 8月 29, 2013 10:55 pm 文章标题: |
|
|
philslizzy wrote:
| Lloydy 写道: |
Why paint it? that looks wonderful as it is. Just imaging the looks of envy from the guys with big white lenses.  |
yeah right!!!! envy ok.
I'm embarrassed showing it here to you guys who I know will tell me its wonderful and well done for an amazing job . it will need some serious work before I take it outside. But I will do it. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| 返回顶部 |
|
 |
Lloydy
 注册时间: 2009年9月2日 文章: 7880 来自: Ironbridge. UK.
Expire: 2022-01-01
|
 发表于: 周四 8月 29, 2013 11:00 pm 文章标题: |
|
 发表于: 周四 8月 29, 2013 11:00 pm 文章标题: |
|
|
Lloydy wrote:
Function before style, it's a winner everytime. It's the Series 1 Land Rover of cameras.  _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| 返回顶部 |
|
 |
mmelvis
 注册时间: 2010年5月24日 文章: 1326 来自: Florida,USA
Expire: 2015-05-09
|
 发表于: 周五 8月 30, 2013 12:24 am 文章标题: |
|
 发表于: 周五 8月 30, 2013 12:24 am 文章标题: |
|
|
mmelvis wrote:
| Lloydy 写道: |
Function before style, it's a winner everytime. It's the Series 1 Land Rover of cameras.  |
Well stated |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周五 8月 30, 2013 12:35 am 文章标题: |
|
 发表于: 周五 8月 30, 2013 12:35 am 文章标题: |
|
|
iangreenhalgh1 wrote:
It's coming together nicely. As long as it's light tight, who cares about looks. Decent lens/shutter is important too and looks like you have that covered.  _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
|
|