 发表于: 周二 11月 24, 2015 4:28 am 文章标题: |
|
 发表于: 周二 11月 24, 2015 4:28 am 文章标题: |
|
|
RSalles wrote:
Alaios,
How are you?
Well, for the flare like in the initial frames, it can be light leaking in the camera, or when loading - I don't believe it's flare too much on the corner...
For dust & etc: those particles are attracted to the film during drying. Try to use a place in the house where dust had settled, an humid place as a bathroom not in use too often. Avoid to open & close the door and window when drying, as it moves small particles of dust on the air. Try PhotoFlo, some drops in the final water bath, 5 min. immersed will cure those spots, and finally, filter the water for the final rinse using discarding paper filters like those for coffee, double filter is better, only in the final rinse with PhotoFlo.
If some water spots remains after drying, you can also use a filtered water with PhotoFlo and a Q-tip barely humid to remove it from the bright side of the film surface after drying.
For cutting, a big and sharp scissor will do the job: I always touch the underside of the film with the blade and do a gentle cut. If it's too difficult, try using those photo slide cutters,
HTH,
Renato _________________ RSalles BLog: Made in The Wet
http://madeinthewet.blogspot.com.br/ |