| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
landstrykere
 注册时间: 2018年2月10日 文章: 66 来自: Norge
|
 发表于: 周四 10月 25, 2018 4:25 am 文章标题: M42 bare mounts? |
|
 发表于: 周四 10月 25, 2018 4:25 am 文章标题: M42 bare mounts? |
|
|
landstrykere wrote:
Hi,
I don't know how to just call this. I am looking online for M42 mounts to put on lenses coming with PK mounts.
First I think of a Mir-47K that I could buy. It's really hard to find Mir-47 and the one I have spotted comes in PK mount. I could replace it with a M42.
The uninteresting M42 lenses I have around that I could cannibalize don't do it: either the 42 thread is not on a screwed plate but part of the block or there will be a lot of dremeling in order to remove metal (like with the Jena Tessar).
I though I would find easily on Ebay, but whatever keywords I try bring only M42-something adapters.
to give an idea of what I am looking for. Here is a Mir-24N that I bought in box. It's a "N" so Nikon mount, but these lenses came with a M42 mount in the box.. Three screws and done. Here the lens with the M42 mount, and on the box the Nikon mount that was on when I found the lens. I just asked the guy in the shop and he switched mounts.
what I am looking for is the kind of bare M42 mount that sits on this Mir-24.
the closer I found on ebay are reversing rings. There's not to much metall to remove. I bought a M42-52mm:
I can remove the 52 mm thread on the one side and in the case of the Mir-24 for instance the diameter fits:
[/img]
Or also, here I have a Vivitar 17mm in M42. It's a plain plate with the thread, screwed on the back of the lens:
so, that's the kind of part I'd like to find online... |
|
| 返回顶部 |
|
 |
visualopsins
 注册时间: 2009年3月5日 文章: 11699 来自: California
Expire: 2027-07-11
|
 发表于: 周五 10月 26, 2018 2:06 am 文章标题: |
|
 发表于: 周五 10月 26, 2018 2:06 am 文章标题: |
|
|
visualopsins wrote:
Some extension tubes have plates like that attached by three or four screws. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| 返回顶部 |
|
 |
philslizzy
 注册时间: 2012年8月7日 文章: 4753 来自: Cheshire, England
|
 发表于: 周二 3月 26, 2019 4:24 pm 文章标题: |
|
 发表于: 周二 3月 26, 2019 4:24 pm 文章标题: |
|
|
philslizzy wrote:
A reversing ring is perfect. They are very cheap and easy to adapt. The size of the filter thread is irrelevant though keep it 49mm or smaller for a smaller diameter flange.
I cut off the filter thread with a junior hacksaw and file it down until flat. Drill the holes where you want.
This is how I make special adapters for my Sony E - same principle exactly. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| 返回顶部 |
|
 |
DConvert
 注册时间: 2010年6月12日 文章: 984 来自: Essex UK
|
 发表于: 周三 3月 27, 2019 10:45 am 文章标题: |
|
 发表于: 周三 3月 27, 2019 10:45 am 文章标题: |
|
|
DConvert wrote:
I'm very slowly progressing on a mount swap on one of my lenses.
Drilling the holes in exactly the right place might be tricky, and the screw heads then NEED to be recessed so they do not obstruct the mounting flange.
Changing from PK - M42 you'll want to get exactly the same flange position to maintain infinity focusing. I'm changing a Sony A to EF so it will fit my focal reducer etc. which gives me a slight gap to fill (unfortunately not enough for a separate adapter).
I'd find it useful to mount some of my PK lenses on M42 helicoids, but there's no way I'll attempt a mount swap for those. At some point I'll get a shortish adapter cobbled together and live with the 15mm or so extension that gives me by just using shorter helicoids... |
|
| 返回顶部 |
|
 |
philslizzy
 注册时间: 2012年8月7日 文章: 4753 来自: Cheshire, England
|
 发表于: 周四 3月 28, 2019 1:50 pm 文章标题: |
|
 发表于: 周四 3月 28, 2019 1:50 pm 文章标题: |
|
|
philslizzy wrote:
| DConvert 写道: |
I'm very slowly progressing on a mount swap on one of my lenses.
Drilling the holes in exactly the right place might be tricky, and the screw heads then NEED to be recessed so they do not obstruct the mounting flange.
Changing from PK - M42 you'll want to get exactly the same flange position to maintain infinity focusing. I'm changing a Sony A to EF so it will fit my focal reducer etc. which gives me a slight gap to fill (unfortunately not enough for a separate adapter).
I'd find it useful to mount some of my PK lenses on M42 helicoids, but there's no way I'll attempt a mount swap for those. At some point I'll get a shortish adapter cobbled together and live with the 15mm or so extension that gives me by just using shorter helicoids... |
One way to get the correct positions for the holes.
You need:
A Pringles cap (Clear)
fine marker
small nail
Put the cap over the rear of the lens and mark the position of the index with a fine tip pen, then mark where the holes must be. Carefully heat the nail and push it through the marks. Put the cap over the mount, taking care to align the index mark with the top of the mount. Make sure, if you are marking the rear of the lens mount, the cap must be reversed. Push the nail through the hole and gently tap with a small hammer, just enough to make a dent. This will give you a precise location to drill. To countersink I use a wider drill and just touch the hole. You may have to make a hole in the cap to accommodate the flange or rear of the lens. This needn't be too accurate.
I've done this countless times, it's my excuse to pig out on Pringles!
Hope it helps. _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| 返回顶部 |
|
 |
DConvert
 注册时间: 2010年6月12日 文章: 984 来自: Essex UK
|
 发表于: 周四 3月 28, 2019 4:53 pm 文章标题: |
|
 发表于: 周四 3月 28, 2019 4:53 pm 文章标题: |
|
|
DConvert wrote:
| philslizzy 写道: |
| DConvert 写道: |
I'm very slowly progressing on a mount swap on one of my lenses.
Drilling the holes in exactly the right place might be tricky, and the screw heads then NEED to be recessed so they do not obstruct the mounting flange.
Changing from PK - M42 you'll want to get exactly the same flange position to maintain infinity focusing. I'm changing a Sony A to EF so it will fit my focal reducer etc. which gives me a slight gap to fill (unfortunately not enough for a separate adapter).
I'd find it useful to mount some of my PK lenses on M42 helicoids, but there's no way I'll attempt a mount swap for those. At some point I'll get a shortish adapter cobbled together and live with the 15mm or so extension that gives me by just using shorter helicoids... |
One way to get the correct positions for the holes.
You need:
A Pringles cap (Clear)
fine marker
small nail
Put the cap over the rear of the lens and mark the position of the index with a fine tip pen, then mark where the holes must be. Carefully heat the nail and push it through the marks. Put the cap over the mount, taking care to align the index mark with the top of the mount. Make sure, if you are marking the rear of the lens mount, the cap must be reversed. Push the nail through the hole and gently tap with a small hammer, just enough to make a dent. This will give you a precise location to drill. To countersink I use a wider drill and just touch the hole. You may have to make a hole in the cap to accommodate the flange or rear of the lens. This needn't be too accurate.
I've done this countless times, it's my excuse to pig out on Pringles!
Hope it helps. |
Sounds like an ideal method I'd better buy a few packs of Pringles to make sure I get it right. Eating the contents before my kids get to them will no doubt make me thirsty too so maybe a drink or two needs buying at the same time...
 |
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|