MFlenses - 数码时代的新生
MFLenses 2026

手动对焦镜头论坛

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。

通过维修记录、实拍样片和图文丰富的档案帖,探索老镜头的世界。
精选

论坛首页的合作伙伴展示位。

Second developed roll: partial failure
查看上一个主题 :: 查看下一个主题  


Reply

The 6x6 was loaded correctly. But I had two problems:

1: Several blotches to ruin the photos. Yes I did tap strongly after every inversion. Could it have been perhaps the prewash? 4-5 blotches on the photos, and several more along the edges where the film edges touch the reel. Perhaps I have to reel in the film more?

2: The film has wrinkles like if it was squeezed. I tend to blame this on my idea of placing a second empty reel on top of the loaded one. I thought that without it, the loaded reel might slip out of the pole during inversions. I had to press quite a bit to fit the second reel inside on top of the expanded one that held the 120 film. Perhaps this pressure caused the wrinkles. Any idea if it's possible to put only one reel in the tank without risk?

Contrast with Rodinal and Agfapan seems lower than with Tmax film and developer. I'll have to print to see the real story though.


Reply

For #2 : I think it comes from the differences of temperature between the different baths, did you controlled it (or at lest, tried to have a constant temperature) ?


Reply

How did you wash the film, and what kind of water/wetting agent did you use for the last wash?


Reply

CarbonR 写道:
For #2 : I think it comes from the differences of temperature between the different baths, did you controlled it (or at lest, tried to have a constant temperature) ?


The baths were all made from the same water, which was around 20° C

Perhaps the rinsing water was different, because it's difficult to get constant temperature out of the tubes. Maybe next time I will have to prepare in advance the rinsing water also.


Reply

ludoo 写道:
How did you wash the film, and what kind of water/wetting agent did you use for the last wash?


directly from the tube, and the last wash was made instead with demineralized water with a little Tetenal wetting agent


Reply

Orio 写道:
The 6x6 was loaded correctly. But I had two problems:
1: Several blotches to ruin the photos. Yes I did tap strongly after every inversion. Could it have been perhaps the prewash? 4-5 blotches on the photos, and several more along the edges where the film edges touch the reel. Perhaps I have to reel in the film more?


Orio - what were the blotches like? Undeveloped, or underdeveloped emulsion, or some other kind of mark? You mention the film was wrinkled - could the blotches have been where the film base was contacting the emulsion through distortion in the spiral? That might have kept the developer from accessing the emulsion, partly at least. Sometimes if the emulsion grips tightly in the spiral you can get a similar problem, especially if the film has managed to become corrugated in the loading.

What sort of tank and spiral do you use?


Reply

blotches look black in the centre with a halo
I used Kaiser tank and spiral.


Reply

This is how one of the blotches looks like:



Reply

Nothing comes to my mind about the blotches right now. For what is concerning to put a 2nd reel on top of the first this is correct and must be done with 35mm when doing only one roll (for the reason you rightly thought). With the reel expanded to 120 size there is not enough room to do that (at least with my tank) but no reason either since the volume of chemicals is enough to ensure proper coverage even if the single reel should slip (this is not true with 135). So it's possible the film may have been somewhat squeezed.

Cheers, Marty.


Reply

Hi Orio
I think you will have great success. The tones are lovely.
The blotches to me look like the roll was pinched and making contact with itself as it spiraled around. The blotch areas did not get enough developer.
I've seen the same in my rolls from time to time when use stainless spools and get a poor wind on in the darkroom.


Reply

Andy, I think you may be right.


Reply

Notwithstanding the blotch on your sample image - it's a BEAUTY! The tonalities are breathtaking.


Reply

The Patterson tank I used (long ago) had a plastic clip that slid down to keep the spiral in place, there was no need to put another spiral on top.