| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周四 12月 22, 2011 6:11 pm 文章标题: Separated Elements |
|
 发表于: 周四 12月 22, 2011 6:11 pm 文章标题: Separated Elements |
|
|
iangreenhalgh1 wrote:
Hi folks
Is it possible to repair a lens that has some separation? i have heard of people putting them in the oven, is this an old wive's tale or does it work? _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
luisalegria
 注册时间: 2008年3月7日 文章: 6602 来自: San Francisco, USA
Expire: 2018-01-18
|
 发表于: 周五 12月 23, 2011 5:43 am 文章标题: |
|
 发表于: 周五 12月 23, 2011 5:43 am 文章标题: |
|
|
luisalegria wrote:
I have actually tried this - used an old toaster oven.
It didn't work for me, the separation just changed shape.
The proper solution in theory would be to re-separate the elements and re-cement them, which is apparently not out of the question for a novice, if one takes care to keep the elements correctly aligned while they set.
What I wonder about though is the effect on coatings. Unless I miss my guess heating elements may damage them badly. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| 返回顶部 |
|
 |
Sevo
 注册时间: 2008年8月22日 文章: 1189 来自: Frankfurt, Germany
Expire: 2012-12-03
|
 发表于: 周五 12月 23, 2011 8:20 am 文章标题: |
|
 发表于: 周五 12月 23, 2011 8:20 am 文章标题: |
|
|
Sevo wrote:
Re-cementing through heat does not work for the lenses we usually talk about - Canada balsam, where mild warming did work, was only used up until the thirties to late forties, and the plastics that succeeded it tend to go yellow or brown before they separate for good rather than re-join. _________________ Sevo |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周五 12月 23, 2011 12:26 pm 文章标题: |
|
 发表于: 周五 12月 23, 2011 12:26 pm 文章标题: |
|
|
iangreenhalgh1 wrote:
Thanks guys, I'll pass on the diy treatment then, I don't fancy boiling elements in solvent to separate then re-cement as I doubt I'd get em centred. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
visualopsins
 注册时间: 2009年3月5日 文章: 11698 来自: California
Expire: 2027-07-11
|
 发表于: 周五 12月 23, 2011 3:00 pm 文章标题: |
|
 发表于: 周五 12月 23, 2011 3:00 pm 文章标题: |
|
|
visualopsins wrote:
Off and rejoining of an objective lens
Ultraviolet Curing Optical Cements and Photopolymers _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| 返回顶部 |
|
 |
Attila
 注册时间: 2007年2月24日 文章: 58002
Expire: 2025-11-18
|
 发表于: 周五 12月 23, 2011 8:07 pm 文章标题: |
|
 发表于: 周五 12月 23, 2011 8:07 pm 文章标题: |
|
|
Attila wrote:
| iangreenhalgh1 写道: |
| Thanks guys, I'll pass on the diy treatment then, I don't fancy boiling elements in solvent to separate then re-cement as I doubt I'd get em centred. |
Charles doing it successfully on expensive lenses if need, difficult, costly process. |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周六 12月 24, 2011 12:48 am 文章标题: |
|
 发表于: 周六 12月 24, 2011 12:48 am 文章标题: |
|
|
iangreenhalgh1 wrote:
Thanks Attila, I had seen a Distagon with severe separation going very cheap, I will pass on it. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
ZoneV
 注册时间: 2009年11月9日 文章: 1633 来自: Germany
Expire: 2011-12-02
|
 发表于: 周一 1月 02, 2012 1:02 pm 文章标题: |
|
 发表于: 周一 1月 02, 2012 1:02 pm 文章标题: |
|
|
ZoneV wrote:
I have made first experiments with canada balsam with an old Agfa lens. But the result was not good enough - but I think with some refinement it could be DIY done.
Thinking about a procedure to work without loosing to much of the heat whilst taking the two oarts together, probably near some heating element, to get more time to align and get the canada balsam every where.
Or try to get better amount of canaca balm onto the lens.
Or take UV cureable glue - so I have long time to adjust, and when I am think I am ready I could use the sun for curing. I think this way would be much easier. _________________ Camera modification, repair and DIY - some links to look through: http://www.4photos.de/camera-diy/index-en.html
I AM A LENS NERD!
Epis, Elmaron, Emerald, Ernostar, Helioplan and Heidosmat.
Epiotar, Kameraobjektiv, Anastigmat, Epis, Meganast, Magnagon, Quinar, Culmigon, Novotrinast, Novflexar, Colorplan, Sekor, Kinon, Talon, Telemegor, Xenon, Xenar, Ultra, Ultra Star. Tessar, Janar, Visionar, Kiptar, Kipronar and Rotelar.
|
|
| 返回顶部 |
|
 |
bob955i
 注册时间: 2007年4月15日 文章: 2495
|
 发表于: 周一 1月 02, 2012 9:50 pm 文章标题: |
|
 发表于: 周一 1月 02, 2012 9:50 pm 文章标题: |
|
|
bob955i wrote:
I have a Flektogon 35 that had what appeared to be a fingerprint inside a cemented doublet - I marked the doublet sides for some degree of correct re-alignment then used a hairdryer to gently heat the doublet until the balsam melted enough to separate the two elements. The balsam was then cleaned off, a tiny spot of watch oil applied to the relevant side of one element, the other was then fitted to it and slid around to spread the oil. The previously made marks were then re-aligned and the doublet refitted. The oil layer is so thin that it's effectively clear.
Worth a try if the lens is cheap or as an experiment on one that it doesn't matter if it doesn't... |
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|